PDA

View Full Version : Peak Performance 5 Lug conversion - S13

boost infested
10-10-2005, 06:21 PM
Super easy... it took about 90mins.
http://members.shaw.ca/Boost-b/5lug/103_0345.JPG
http://members.shaw.ca/Boost-b/5lug/103_0346.JPG

*30mm deep socket*
http://members.shaw.ca/Boost-b/5lug/103_0347.JPG
http://members.shaw.ca/Boost-b/5lug/103_0348.JPG

http://members.shaw.ca/Boost-b/5lug/103_0349.JPG
http://members.shaw.ca/Boost-b/5lug/103_0350.JPG
http://members.shaw.ca/Boost-b/5lug/103_0351.JPG

transfered the abs ring over to the new hubs.
http://members.shaw.ca/Boost-b/5lug/103_0370.JPG
http://members.shaw.ca/Boost-b/5lug/103_0371.JPG

Make sure the axle nut is tight and cotter is in.
http://members.shaw.ca/Boost-b/5lug/103_0352.JPG
http://members.shaw.ca/Boost-b/5lug/103_0353.JPG
http://members.shaw.ca/Boost-b/5lug/103_0354.JPG
boost infested
10-10-2005, 06:22 PM
Caliper/rotor back on..
http://members.shaw.ca/Boost-b/5lug/103_0354.JPG

Put R32 GTR wheels on the front...
http://members.shaw.ca/Boost-b/5lug/103_0355.JPG
http://members.shaw.ca/Boost-b/5lug/103_0356.JPG
http://members.shaw.ca/Boost-b/5lug/103_0357.JPG

Factory forged 16x8 30mm offset 225/50-16. Will clear z32 brakes and coilover. (a cunt hair between the coilover and tire)
http://members.shaw.ca/Boost-b/5lug/103_0358.JPG

if this is a repost please let me know or delete it.
SimpleSexy180
10-10-2005, 06:33 PM
wow nice i didnt know it was that easy. thanks for the writeup.
boost infested
10-10-2005, 06:36 PM
wow nice i didnt know it was that easy. thanks for the writeup.

if you have abs, the abs ring will take a little long because u have to heat it and press the ring out of the old hubs.
D1champ
10-10-2005, 06:57 PM
What about the rear?
boost infested
10-10-2005, 07:22 PM
z32 rears are on the way..
slide_or_die
10-10-2005, 07:37 PM
great writeup. cant wait to see the rears