fender rolling an s13

[Chrischeezer]

hello everyone,

well its time to finally push the rear wheels out! I found a good site that sells the spacers at a great price. I plan to buy 1 1/2 inch spacers to get those wheels out. But I will most defiantly require to roll the inside of the fender wells for clearance of my 18x8 +35?offset wheels. anyone have good/bad experiences renting a fender roller?
it seems that with enough heat I could push a *small* amount of the fender itself out. for a greater ammount of space. has anyone ever done this with a fender roller??

by the way I have an s13 with apexi coilovers. they have a BIG drop in the rear and the wheel camber is noticeably negative.... my s13 is also hicas (disabled) so getting those rear wheels perfect is going to be a hard... right? any suggestions?


Thanx,
Chris

[Chasmoore04]

Search there are threads on fender rolling. I pushed mine out a few inches, and no paint chip. You only get paint chip if you suck at fender rolling.

http://www.driftclub.net/media/ourcars/black92s13/39088139_123422582_0.jpeg
http://www.driftclub.net/media/DCircuit9-10/Picture-050.jpg

as you can see they really make the rear fenders large

[Irukandji]

but it does nothing for body roll :-p

[Chasmoore04]

i know, its shitty

[Chrischeezer]

what size spacers did you use?

[Chasmoore04]

What spacers?

[HyperTek]

your gonna use spacers so u can have an excuse to roll your fenders?? ghey..

[cheez80]

instead of using a fender roller, i use a hammer on the inside. i don't like the lip that a fender roller leaves.

[Chrischeezer]

your gonna use spacers so u can have an excuse to roll your fenders?? ghey..
ohh darn :wiggle: