slownslurious
10-06-2005, 09:46 PM
I currently have the following items ready to ship:
SR20DET red top T25 no shaft play no oil leak, comes with elbows for compressor: $150 + ship
HKS SQV (older model SEQUENTIAL blow off valve, single chamber, no leaks on atmospheric vented mafs car), comes with HKS pipe for s13 sr20/ca18 but will fit any setup: $75 + ship
S13 automatic driveshaft (I believe its the same as 5 speed) removed from 93 convertible w/o ABS- $50 plus ship
S14 SE axles (no stub axles just the shafts, 95 SE) $10 plus ship
(3) stock jecs fuel pumps, all in good working order. One is the style with the return hose on the top of the pump, the other is the usual style without a return hose, and the third is still in the tank. $10 each plus shipping
ca18det factory cast turbo manifold + heat shield (no cracks) $35 plus shipping
The stock following items will be available in the next couple weeks:
CA18DET stock turbo. No shaft play, boosts excellent. Was run for about an hour with an oil drain kink which slightly damaged the oil seals. Occasionaly smokes on startup or at full throttle at high rpms but 98% of the time is just fine. $100 obo plus ship
CA18DET stock side mount intercooler, should also fit S13 SR20. Everything from turbo elbow to intake coupler, inclouding all hoses and IC. All in excellent shape no cracks or leaks. $150 plus ship
CA18DET stock mafs/ecu/injectors- will only sell if price is right, so make an offer.
The following aftermarket items will be available in the next couple weeks:
CA18DET XS power stainless steel manifold (new design, braced, thicker piping, ported). In perfect shape, only run for 2 months, made a big difference in top end power. #3 runner dented slightly to clear valve cover bolt, not noticeable unless you look for it. New is $120 shipped mine is like new even will comes with new unused gaskets, $75 plus shipping.
Megan racing stainless 3" outlet 02 housing, perfect shape, New is $73 plus $14 shipping, asking $50 plus shipping
Megan racing stainless 3" downpipe, bottom is dented/scraped a considerable amount but not enough to restrict flow, new is $85 plus $35 shipping, asking $50 plus shipping.
Also parting out the interior from a 93 SE convertible and all mechanical parts from an 89 LE coupe within the same time frame, including a mint s13 front end (either the dohc or the sohc, not sure which yet).
All items will be placed on ebay if not sold in the next 2 weeks.
I am located in Houston, TX. All items will be available for local pickup.
Payment accepted: cash or POSTAL MO (other MO's will be held 10 days). Paypal payment is available but buyer must provide me with their personal information which I will verify due to losing money via paypal in the past. Will ship to verified buyers only, buyer will pay extra for tracking.
All items will be available to ship USPS priority or parcel post or UPS, generally whichever is cheaper or at buyers request. All items will be packed in bubble wrap and peanuts and a new, correctly sized box.
All emails should be directed to [email protected] or you can respond here or via PM.
If you wish to purchase more than one item a discount may be available, contact me for details.
Thank you
Andrew
SR20DET red top T25 no shaft play no oil leak, comes with elbows for compressor: $150 + ship
HKS SQV (older model SEQUENTIAL blow off valve, single chamber, no leaks on atmospheric vented mafs car), comes with HKS pipe for s13 sr20/ca18 but will fit any setup: $75 + ship
S13 automatic driveshaft (I believe its the same as 5 speed) removed from 93 convertible w/o ABS- $50 plus ship
S14 SE axles (no stub axles just the shafts, 95 SE) $10 plus ship
(3) stock jecs fuel pumps, all in good working order. One is the style with the return hose on the top of the pump, the other is the usual style without a return hose, and the third is still in the tank. $10 each plus shipping
ca18det factory cast turbo manifold + heat shield (no cracks) $35 plus shipping
The stock following items will be available in the next couple weeks:
CA18DET stock turbo. No shaft play, boosts excellent. Was run for about an hour with an oil drain kink which slightly damaged the oil seals. Occasionaly smokes on startup or at full throttle at high rpms but 98% of the time is just fine. $100 obo plus ship
CA18DET stock side mount intercooler, should also fit S13 SR20. Everything from turbo elbow to intake coupler, inclouding all hoses and IC. All in excellent shape no cracks or leaks. $150 plus ship
CA18DET stock mafs/ecu/injectors- will only sell if price is right, so make an offer.
The following aftermarket items will be available in the next couple weeks:
CA18DET XS power stainless steel manifold (new design, braced, thicker piping, ported). In perfect shape, only run for 2 months, made a big difference in top end power. #3 runner dented slightly to clear valve cover bolt, not noticeable unless you look for it. New is $120 shipped mine is like new even will comes with new unused gaskets, $75 plus shipping.
Megan racing stainless 3" outlet 02 housing, perfect shape, New is $73 plus $14 shipping, asking $50 plus shipping
Megan racing stainless 3" downpipe, bottom is dented/scraped a considerable amount but not enough to restrict flow, new is $85 plus $35 shipping, asking $50 plus shipping.
Also parting out the interior from a 93 SE convertible and all mechanical parts from an 89 LE coupe within the same time frame, including a mint s13 front end (either the dohc or the sohc, not sure which yet).
All items will be placed on ebay if not sold in the next 2 weeks.
I am located in Houston, TX. All items will be available for local pickup.
Payment accepted: cash or POSTAL MO (other MO's will be held 10 days). Paypal payment is available but buyer must provide me with their personal information which I will verify due to losing money via paypal in the past. Will ship to verified buyers only, buyer will pay extra for tracking.
All items will be available to ship USPS priority or parcel post or UPS, generally whichever is cheaper or at buyers request. All items will be packed in bubble wrap and peanuts and a new, correctly sized box.
All emails should be directed to [email protected] or you can respond here or via PM.
If you wish to purchase more than one item a discount may be available, contact me for details.
Thank you
Andrew