GT30 mod list help

[s13dan]

Well i think i finally am set on a gt30, for my redtop... i know not everyone has this turbine but from experience and maybe simular turbo what do i need to run this set up. I currenty have or am going to get in near future-
255
Z32 MAF
Safc
FMIC all hard piping
Turbo back 3 in exhaust
660cc injectors
tubular maifold
GT3071r
HKS actuator
Jim wolf or enthalpy ECU tune, then dyno

I know some kind of cams would help alot and intake mani ect.. but is there anything im really missing.. will i need rocker arm stoppers,Head gasket, anything.. i know im pushing stock internals but here im the only modded SR and there a lot of KA-Ts so i got to show them whats up...

[TheSnail]

Go for some 264-272, Ditch the safc, yes you need ras and a head gasket, and no you're not the only one with a "modded" sr on here, far from it.

[KrazyZenki]

I believe what he meant was he is the only modded SR in his town.

Looks like you have a good setup there, with cams and proper tuning ::cough:: Scott ::cough:: you should see 400-450rwhp.

Keep us posted.

[s13dan]

well since RAS and head gasket are not that expensive i will most likely get those. biggest issue around here is tuning.Jim wold website dosnt help any and i dunno how to get ahold of enthalpy.

And i meant im the only modded SR in my town.sorry. lot of turbo KAs that claim to be stock interanls runnin hi 12's and think they are badshit. i want to show them what a actually stock internally SR will do. no forged pistons no shotpined rods either. hopfully low 11's

[fliprayzin240sx]

Scott would prolly tell you to go ahead and run 740cc injectors. Also head gasket is a must, stockies just suck. Only other thing that i can really think of is depending on what cam setup you decide to run, you might wanna start thinking of stiffer valve springs. SAFC you can have to \"fine\" tune enthalphys setup a bit more.