Can't Get the Darn thing Off!

[ladyinred]

I'm trying to remove injector #4 without stripping the bolts but they're in there pretty tight.. I sprayed some PB Blaster and I'm gonna let them soak until tomorrow, but just in case that still doesn't do the job, anyone have any tips on a better way of getting them off?

Thanks

[projectRDM]

Impact screwdriver. Once you get the screws out, go buy some M5 machine screws (IIRC) to put back in, you'll never have to worry about it again.

[ladyinred]

Great, I'll do that... where can I find those screws? local hardware shop? THANKS

[aznpoopy]

Great, I'll do that... where can I find those screws? local hardware shop? THANKS

yeah... where can you get those?

i was sweating my balls off trying to take those fuckers out without stripping the phillips head.

edit: btw i found grips to work real well if you happen to strip it by accident.

[projectRDM]

Take one to a good hardware store and match it up per the threads, or take the whole rail in.

[Indolent]

VISE GRIPS!!!!!
lol i've had fuel injector problems and been replacing mine like crazy, it's all good now, friend told me to use vise grip around the screws, damn why didn't i think of that earlier, so much easier, gets it off like nothing, once i got each lose jus used a screw driver, easy

[WideS13]

Try NAPA for the new hardware. They usally have large shelf type displays that have all diffrent kind of thread pitch ans size bolts. They have always had what I was looking for and then some. You should replace them with ones that have hex key heads.

[SpeedMonkeyInc]

I just went through the same thing. I used needle nose vise grips, then replaced the screws with normal bolts. Much better now! As big a PITA as those little screws where, nothing like getting the injectors themselvs out! Anyone have any tips on how go get injectors out of the rail without damaging the injector tops?

[aznpoopy]

I just went through the same thing. I used needle nose vise grips, then replaced the screws with normal bolts. Much better now! As big a PITA as those little screws where, nothing like getting the injectors themselvs out! Anyone have any tips on how go get injectors out of the rail without damaging the injector tops?

use two wide flat screwdrivers and pry them out. if you are really anal you can wrap the tip with some tissue paper or rubber bands.

[projectRDM]

Hose pliers rule for pulling injectors.

[ladyinred]

thanks for all the help... now once i have them off, I need to replace the injector! LOL.. anyone have a good working injector for sale??


VISE GRIPS!!!!!
lol i've had fuel injector problems and been replacing mine like crazy, it's all good now, friend told me to use vise grip around the screws, damn why didn't i think of that earlier, so much easier, gets it off like nothing, once i got each lose jus used a screw driver, easy

Indolent: So, replacing the injector solved your problem? I read your past threads and I'm having a very similar problem with my #4 injector as you had with yours.. I've already done the compression test, checked the plugs for sparks, checked resistance, isolated the problem to injector#4, and just seafoamed my gas tank, crank case, and intake mani to see if it may be a clogged injector... But now i'm looking to just go ahead and replace it..

[theicecreamdan]

http://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=TOOL&pid=00947641000&subcat=Automotive+Specialty+Tools

THE best tool in my roll-away, actually its the second best tool, because its useless without

http://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=TOOL&pid=00938395000 any hammer will do, but the uses of the big boys are infinite. :hammer: :hammer: :hammer: