FOR SALE. 1993 240sx fastback-SR20de(t)$7,000o.b.o. lots of pics

[.::SR20_240::.]

i hate to say it but i have to sell my car i have 3 of them and i guess this one has to go. all im am asking is 7,000 or best offer. heres the parts list and some pics. hub quick release and nardi steering wheel NOT included, i will put the stock one back on.
Body :
1993 Nissan 240SX fastback with 180sx trunk and rear garnish

Color :
silver (outside of car only,the cars stock color is a fugly white)

Wheels/Suspension/Brakes :
stock JDM nissan 180sx Type-X wheels- not pictured
F/ 195/60/R15
R/ 195/60/R15
2 JDM enkei mesh wheels 15x7 +15 offset
195/60/r15 good years with about 40% left
2 JDM watanabe rs8 wheels 15x7.5 +20 offset
205/60/zr15 Made In Japan no DOT brigestone tires about 20% left
2 25mm 4x114.3 bolt on wheeel spacers
stock Lug Nuts
Tein Type flex suspention
suspention tech rear swaybar
strut bars Front and rear
drilled/slotted rotors (all 4)
red stuff Pads


Interior :
Stock (BLack) Door Panels/dash/panels
JDM non power seat belts
sparco sprint Jr. little beat up but still dose the job.
s14 driver and passnger seats- not pictured
automeater C/F Boost Gauge w/ piller pod
jdm skyline r31 shift nob (white)
drift turn nob
jdm cluster with the stock 240sx MPH the jdm tach(go's to 9,000rpm)


Engine :
SR20DET redtop(painted camo), 36KM when pulled motor from clip
new headgasket
ARP Headbolts
ARP intake manifold bolts
ARP turbo manifold bolts
HKS 264 Step 1 Cams
HKS Rocker Arm Stoppers
tuned ECU- 9,000rpm rev limit and air/fuel moifyed for higher boost
HKS SLD stage 1-not pictured
HKS turbo timer
S13 SMIC W/stock Piping & greddy type s bov
New Z32 Fuel Filter
walbro 255cfm fuel pump
s13 (blacktop) MAF Sensor
HKS green round Air Filter
koyo Radiator
slim fan
nismo 2way (never changed diff oil) feels like VLSD
180sx sr20det drive shaft (not stock 240sx)
Spec stage 3 Clutch W/Pressure Plate
Stainless Steel Turbo Outlet Pipe
3" HKS Downpipe



Vehicle Condition

Story Behind the Car :

It was bought in 2000 from a 3rd owner with a blown stock motor and missing frount bumper/hood/seats,the car was bought as a project and i think i did nicely at fixing it up, all replacement parts are OEM Nissan parts form the dealer not crapy copys that dont fit.over 13,000 invested not includeing the 1,300 that i payed for the car.have all recepts for every penny spent on the car. I'm selling her because i do not have enuff space for it seeing that i have 3 other cars and a small driveway and yard. Since the car was completed it has less then 3,100 miles under her belt and all the parts that are on it.all parts were bought new other than the seats and wheels, It has never been taken to any drift events, only drifted a few times at local parking lots and raced a few times here an there. The car is in a dam good condition, exterior, interior, engine, drivetrain. Pictures simply cannot do justice would have to see her in person and take for a test drive. The car dynoed at 260whp at 11psi,the motor ECU, and turbo are good up to 25psi but yet to take it there. would love 4 her to go to someone that will take as good care of her as i have.




Terms of Sale

Payment Terms:

The full payment must be received, from the buyer, at the pickup of the vehicle. I will only accept cash no cheaks. The car will not be released to the buyer until full payment is received.

Shipping:

pick up only(i will not ship this car so plese do not ask), he/she is also responsible for
any damages or problems that may occur after recieving the vehicle.

Terms of Sale :

This vehicle is being sold "AS-IS" where is with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects here in, and makes no warranty in connection there with. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. i will have the car smoged apon the buyers request only. Buyer also pays any extra costs.

http://i23.photobucket.com/albums/b355/po0chucker/DSCF1525.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1520.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1522.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1516.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1409.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1314.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1301.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1552.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1551.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1550.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1549.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1548.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1547.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1546.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1544.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1536.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1543.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1542.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1541.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1540.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1539.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1538.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1537.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1534.jpg
http://i23.photobucket.com/albums/b355/po0chucker/DSCF1532.jpg

[.::SR20_240::.]

anybody??? any GOOD offer will be considerd and willing to make a trade..

[mrmephistopheles]

don't crosspost into FS.

[.::SR20_240::.]

newly added catback bolt on N1 ( its the little one i think for the NA 180sx's in japan) the piping is 3" and the mufler inlet is 3" but the the tip is only 3 1/4 inch. sorry no pics, you can kinda see it in one of the pics but not to well.

[Zemus]

hey where do you live i want your car and prolly ill buy it. i would really like to look at it and ill give 6500-6700 for the car get back to me at [email protected]

[Fat Felix]

PM sent.

free bump

[.::SR20_240::.]

sorry to tell you this guys but the sale of this car is on hold.. i now have to send the car to the state ref thanks to a dick head ass cop that just happended to be smoging his truck at the same time my car was trying to get passed. after all the REF bullshit and maybe geting this thing leagel for the streets. ill be able to repost it. unless someone want to buy it as a track car only or register it in a state that dont need smog.

[.::SR20_240::.]

OK everyone i got the car past smog and ref as well so it will be back up for sale soon i had to detune it to pass the smog and ref so it will come with the the parts as listed below and im willing to get it painted b4 sale as well. car still looks the same just dont come with the wheels that are pictured. oh yea the price is lowered to 6,000 or best offer.. and am willing to take a trade for a s14 with some mods and maybe a s13 coupe or fastback with some mods thay dont have to have sr20's.

Wheels/Suspension/Brakes :
stock JDM nissan 180sx Type-X wheels
F/ 195/60/R15
R/ 195/60/R15
stock Lug Nuts
Kei office TYPE-XR cilovers
suspention tech rear swaybar
strut bars Front and rear
drilled/slotted rotors (all 4)
red stuff Pads


Interior :
Stock (BLack) Door Panels/dash/panels
stock Passanger Seat
beat up red sparco Driver seat with red sparco seat belts
automeater C/F Boost Gauge w/ piller pod
jdm skyline r31 shift nob (white)
drift turn nob
jdm cluster with 240sx MPH the jdm tach(go's to 9,000rpm)


Engine :
SR20DET redTop(painted camo), 36KM when pulled motor from clip
APEXi 1.3mm headgasket
ARP Headbolts
ARP intake manifold bolts
S13 SMIC W/stock Piping & greddy type s bov
New z32 Fuel Filter
walbro 255 fuel pump
s13 (blacktop) MAF Sensor
HKS green round Air Filter
koyo Radiator
JDM VLSD with new axels
180sx sr20det drive shaft (not stock 240sx)
Spec stage 3 Clutch W/Pressure Plate
Stainless Steel Turbo Outlet Pipe
3" blitz Downpipe
Apexi bolt on catback N1 Muffler

[s14dude]

did you still want to trade for my s14? its still up for grabs....

[werwuryoantenaz]

email me im interested on the trade.....

[.::SR20_240::.]

car is not for sale anymore.. went to get a new title and found out there has been a lean hold on my car and i was never told about it. zenki s14 dude sorry im just going to keep it.