tranny leak from shifter

[prymer 240]

aight.. i filled up my tranny 2 3/4 from the shifter.now when i put it back and driving around or wat not... it seems the gear oil is coming out from were shifter boot is..i was wondering if i put the shifter in right...firt i slapped the shifter in... then i put the small C clip in.. kind of just laid there....i dunno y... and the i put the larger C clip in.is that the right installation...the samller C clip kind of got me thinkin if it suppose to jus lay there or hold n e thing down or wat not....can n e one help me??

[aznpoopy]

there is a gasket that sits between the tranny and the plate /w t3h 6 bolts. if its fucked you'll leak a ton of gear fluid from around that general area.

[kandyflip445]

You can use RTV to seal it.

[Irukandji]

there is a gasket that sits between the tranny and the plate /w t3h 6 bolts. if its fucked you'll leak a ton of gear fluid from around that general area.


ditto...check that, if you cant fix the leak,rtv it!

[S14DB]

you overfilled your tranny. Fill it from the fill plug next time.

[prymer 240]

to azn poopy,, i didnt remove the 6 bolts, i jus took the c clips out and popped the shifter out. mayb i over filled it

[projectRDM]

2.5qts is full and you probably had a little left over in the case, so you overfilled it.