fiznat
09-23-2005, 11:32 AM
Please refer to here to find out why I am doing this if you are intersted:
http://www.zilvia.net/f/showthread.php?p=819521#post819521
Lots of information/pictures etc of the car can be found at www.ka-t.org/fiznat
I'm going to try and organize things a little. I dont want to part it out dime for dime just yet, but I may be interested in selling things in catagories like listed below. Contact me if interested:
The Car:
*1993 S13 hatch, NO rust, NO accidents, VERY nice cond. 120ish on the OD. Missing differential and exhaust. Some wiring modified for use with AEM, relocated battery, etc. Still have lots of the OEM stuff.
Make an offer or combine it with some of the stuff below (preferably at LEAST the AEM and IC stuff)
1. Turbo Kit ($3500 for everything in this category)
*AEM EMS with UEGO wideband, GM 3 bar MAP sensor, GM AIT and Boost Control Solenoid. Professional tune included.
*PWR 30x12" core FMIC, polished aluminum IC piping with turbohoses.com Silicone + CT clamps
*HKS SSQV BOV
*Tial 38MM Wastegate: 1 bar + 10psi springs
*Snow Peformance Stage II Methanol Injection Kit with variable MAP-Based methanol delivery, includes 2 resoviors (1qt and 4qt) with fluid level sensors). 10 gallons pure methanol included for the locals.
*Autometer cobalt boost + oil pressure gauges with a-pillar mount and sending units
*MSD 6a ignition + Blaster II coil, taylor plug wires (black)
*Phat KA-T top feed Fuel rail, Aeromotive AFPR, MSD 72# injectors and steel braided line with real AN connections
*Walbaro Pump
2. Motor Stuff ($1500 for everything in this category):
*Pauter Forged Rods (new in the box still)
*Ross 8.5:1 .020" over forged pistons (new in the box)
*Built KADE head. 91 S13 Cams, Ferra exhaust valves, 5 angle valve job, Port + Polish, new guides. Professionally assembled to spec.
*1 complete KA (1993), disassembled, 1/2 of my old KA (1997). 1997 Tranny. Lots of new parts - alt, water pump, oil pump, etc
3. Extras/Support ($700 for everything in this category):
*Koyo dual core radiator
*Taylor aluminum battery relocation box with disconnect switch, optima red top battery
*RPS 6 puck clutch with the Heavy Duty pressure plate, recently machined flywheel to match
*S14 black cloth front seats
I will take $7500ish for EVERYTHING I own that is 240 related. This is quite a bit of stuff.
Still would be interested in a trade for a stock S14 + cash. I need at LEAST 4k to pay this debt off, so the trade would need to be everything for your S14 and 4K. Keep in mind that there are lots of extras that I cant remember or are not listing here. My garage is filled to the brim, and for this trade you can have it all.
Contact:
Foster Adams
860 575 3200 call any time day or night
AIM: foosternit
Email: [email protected]
http://www.zilvia.net/f/showthread.php?p=819521#post819521
Lots of information/pictures etc of the car can be found at www.ka-t.org/fiznat
I'm going to try and organize things a little. I dont want to part it out dime for dime just yet, but I may be interested in selling things in catagories like listed below. Contact me if interested:
The Car:
*1993 S13 hatch, NO rust, NO accidents, VERY nice cond. 120ish on the OD. Missing differential and exhaust. Some wiring modified for use with AEM, relocated battery, etc. Still have lots of the OEM stuff.
Make an offer or combine it with some of the stuff below (preferably at LEAST the AEM and IC stuff)
1. Turbo Kit ($3500 for everything in this category)
*AEM EMS with UEGO wideband, GM 3 bar MAP sensor, GM AIT and Boost Control Solenoid. Professional tune included.
*PWR 30x12" core FMIC, polished aluminum IC piping with turbohoses.com Silicone + CT clamps
*HKS SSQV BOV
*Tial 38MM Wastegate: 1 bar + 10psi springs
*Snow Peformance Stage II Methanol Injection Kit with variable MAP-Based methanol delivery, includes 2 resoviors (1qt and 4qt) with fluid level sensors). 10 gallons pure methanol included for the locals.
*Autometer cobalt boost + oil pressure gauges with a-pillar mount and sending units
*MSD 6a ignition + Blaster II coil, taylor plug wires (black)
*Phat KA-T top feed Fuel rail, Aeromotive AFPR, MSD 72# injectors and steel braided line with real AN connections
*Walbaro Pump
2. Motor Stuff ($1500 for everything in this category):
*Pauter Forged Rods (new in the box still)
*Ross 8.5:1 .020" over forged pistons (new in the box)
*Built KADE head. 91 S13 Cams, Ferra exhaust valves, 5 angle valve job, Port + Polish, new guides. Professionally assembled to spec.
*1 complete KA (1993), disassembled, 1/2 of my old KA (1997). 1997 Tranny. Lots of new parts - alt, water pump, oil pump, etc
3. Extras/Support ($700 for everything in this category):
*Koyo dual core radiator
*Taylor aluminum battery relocation box with disconnect switch, optima red top battery
*RPS 6 puck clutch with the Heavy Duty pressure plate, recently machined flywheel to match
*S14 black cloth front seats
I will take $7500ish for EVERYTHING I own that is 240 related. This is quite a bit of stuff.
Still would be interested in a trade for a stock S14 + cash. I need at LEAST 4k to pay this debt off, so the trade would need to be everything for your S14 and 4K. Keep in mind that there are lots of extras that I cant remember or are not listing here. My garage is filled to the brim, and for this trade you can have it all.
Contact:
Foster Adams
860 575 3200 call any time day or night
AIM: foosternit
Email: [email protected]