300zx rotor question

[Al_S14]

ok so i got this 94 Non Turbo 300 in the shop right.... and it has 30mm rotors on it. but from what i have read EVERYWHERE non turbos come with 26mm rotors and calipers. or can 30mm rotors be fitted on a car with 26m calipers?

[projectRDM]

Everywhere sucks.

Only the 1990 NA had 26mm rotors. All other variations of Z32 are 30mm.

[ghostuss]

and 30 mm wont fit 26mm calipers. I found that out the hardway. stupid nobi sent me the wrong rotor and i didn't even check and drilled that into 4 lug for my car. And then when comes installation, can't fit the rotor in with new brakepads no matter what.

[Al_S14]

thanks for the input guys . while we're on the subject how do i tell if it's a 26 or 30mm caliper? is there some kind of stamp on it?

[silvia_gts]

I'm a noob and i know this quistion---SEARCH. ther is a couple threads telling you whats the differences and even shows you pics

[Al_S14]

o really, well why dont you enlighten me you lil bitch! they all look the same.


tell me what looks differnt and ill shut up!!

http://importnut.net/240pics/brake_upgrade/caliper/calipercompare01.jpg
http://importnut.net/240pics/brake_upgrade/caliper/calipercompare06.jpg
http://importnut.net/240pics/brake_upgrade/caliper/calipercompare07.jpg

[bj180sx]

I see you have been reading yugobernies post on www.twinturbo.net. Wll best thing I can say is go to autozone and buy some rebuilt ones if you are unsure about your inquirery.

[silvia_gts]

lil bitch hu, do you see the little 2 stapped on the 30mm one ? you can always measure them. WATCH WHAT YOU SAY!!! :mrmeph:

[theicecreamdan]

I love how the picture you posted where they "look the same" POINTS OUT the differences in BIG RED LETTERS. little bitch.

[Al_S14]

I love how the picture you posted where they "look the same" POINTS OUT the differences in BIG RED LETTERS. little bitch.
as i said point out to me and ill shut up. obviosly i am wrong BUT i dont see those red letters which say 2 means 30mm. :x:

[adoboboy]

Just measure the slots where the rotor is supposed to sit. 30mm ones will measure like 32mm...26mm ones will measure less than 30