FS S14 Radiator and KA24DE parts

[Al_S14]

All is from 98 S14 . please make me an offer i hate to throw any of this away. 134k on all this stuff. Basicly its a complete KA that has been torn apart because i got bored and had no manpower to move complete assembled engine.

S14 Radiator 50$ 70k .

KA 24de pistons and rods
KA 24de Crank(no spun bearings or any kidn of damage at all) SOLD
KA 24de Block in perfect condition with main bearins stil in there to confirm its condition. Block is local i dont know how to ship that damn thing.
COMETIC MULTILAYER STEEL HEAD GASKET 85(asking pretty much same as most shops except i have it on hand...these are hard to get a hold of)
KA 24de Head

Front upper cover
Front lower cover
Oil pan
Cams

[ryan hagen]

how much for the head, valve cover, and front timing cover? any thing worng with anyof it? any more info and i could make a offer. were all the shims left in place?

might be interested in the radiator too.

thanks

[Al_S14]

none of the shims have been moved and are in original place nothing wrong with anything but i woudl recomend replacing valve seals since i had teh head soak in cleaning tank for a while.

ill let you have everything for 100

email me with an offer to [email protected] please we'll go from there.

[ryan hagen]

ok, i ll get back to you, thanks,

[240dreamer]

You have a PM.

[Al_S14]

got pm relied to it

[ryan hagen]

i m putting it on a s13 shortblock so i need basically every thing from the headgasket up, do you still have it? lmk, thanks

[95KA-Turbo]

Hey man, I am local and possibly interested in getting everything minus the cams and pistons/rods...PM me a price your looking for this would be sweet for getting a built motor together - and since your local niether of us would have to worry about shipping.

Was this an Auto or Manual? I am asking because the Auto Radiator is bigger.

Thanks
Stephen

[Al_S14]

sorry took so long to get back to you guys dsl been down.

A this is MANUAL

B Crank is gone

C i have COMETIC HEAD GASKET KA24DE 85$

ryan hagen, as i said above i have a new head gasket and i have everything head up and adjasent but email me with complete list of what you need so i dont leave anything out and double check make sure i got it

PLEASE email me with all your questions i constantly forget about posts i make so i tend to not check back too often [email protected]

Stephen please get back to me on the block before someone accidently throws it away. if you're local we can arrange a pickup this week. .... again email me with everything you need and i will get you a quote.

this is on first come first serve basis i
my cell is 7576153421