f/s work meister s1 1 piece wheels *extreme offset*

[sdwyzs14]

not to be even considered for someone trying to put these on a stock bodied s13 or s14. these wheels will require modification to fit.
i have here on set of work meister s1 1 piece rims for sale

measurements
front 17*9 -69
rear 17*10-52

lip on both wheels is approxamtely 4.5 inches..
the outer is polished and the inner is powdercoated white..

these wheels are a very rare find and even more so in the offsets that they are in. some of the powercoating is flaking off on some of the wheels but it is minor and can be repaired.

here are the pictures

http://i2.photobucket.com/albums/y4/sdwyzs14/rearlip.jpg
http://i2.photobucket.com/albums/y4/sdwyzs14/allfourwheels.jpg
http://i2.photobucket.com/albums/y4/sdwyzs14/lipsticker.jpg
http://i2.photobucket.com/albums/y4/sdwyzs14/frontlip.jpg

lowballers are welcome but will probably not be taken seriously. asking 1500.00 shipped

email all offers to [email protected]

[drift into a curb]

Looks 2 piece. Nice lips on those.

[420sx]

negative 69 offset?? wtf?? are you sure

[FaLKoN240]

Just interested, can you take a pic of the offsets, it should be located behind the face of the wheel

[mistaanime]

fuuuucccckkkkthose are hot..too bad no 5 lug...hehe..5 luggers should jump on this..

[p11driver]

where in so cal?

[qt_240]

ill give you 1380 SHIPPED :) *first lowball * but cash in hand and willing to PAYPAL ASAP !!!!!

[Siizzzoooo]

i will SOOO buy those if I can get my wheels sold :(

[vinhisbored]

Any pictures of these exact rims fitted on a car?

[chmercer]

yes the offset is right, bump for baller wheels

[driftking777]

wondering if there is any curb rash on the rims, also wondering if anyone else has bought from you on here, possibly an ebay account with a good rating...?

[SRkouki]

what car did these wheels come off??? one would need major, major, widebody to put these on an s14 or s13

[sdwyzs14]

chmercer is right the offsets are right. i wouldnt lie about that. he was gonna purchase these but things fell through... wheels are boxed and ready to ship for all who have cash in hand email me with address so i can find out what shipping is... i have no idea what fitment is like on the car but i can tell you these wheels will look NASTY on any car if it is done right... im gonnna assume that it will take at least 50 over on all corners plus some camber and tire stretch to make these fit.

[sdwyzs14]

wondering if there is any curb rash on the rims, also wondering if anyone else has bought from you on here, possibly an ebay account with a good rating...?

unfortunately i dont have any rating with ebay or anyone if you would like to talk with me personally i will email you my phone number.. also there is no curb rash.

for all who may be curious. i am in the marine corp and as such i pride myself on being honest and up front. i am not in the business of ripping people off. i personally would like to castrate people who are.

these wheels were bought in japan. i have never seen them on an s14 or s13, i would like to put them on my car but i need many other things first. ie 5 lug and brake upgrade, plus i dont have the patience to do the body work the right way...oh well my loss you guys win.

[Siizzzoooo]

email me a [email protected]

i wanna talk :)

[mrmephistopheles]

i am in the marine corp

Wonder what that's like?
I wouldn't know, seeing as how I was in the Marine Corps.

[Sean1978]

hmmmmmmmm do you think they would fit on this?
+20mm front fenders and +50mm rear fenders...
http://www.turbotweek.com//images/sileightey/c1.jpg
that's a full chargespeed widebody..


if so, think you could hold off a week or two for a fellow Marine??
if these would fit let me give you a call!
is that the same wheels that are on the chargespeed demo car?
http://www.chargespeed.com/photo/ext-force/s13/f_f.jpg
http://www.chargespeed.com/photo/ext-force/s13/r_f.jpg

[sdwyzs14]

i have a buyer in the works all offers will still be considered in case this one falls through

[Siizzzoooo]

don't worry guys, i'll take good care of them :)

i emailed you back at your yahoo address

[chmercer]

^^^ i dare you to run the 9s on the front axle, lol

[Siizzzoooo]

damn, i never even crossed my mind...what problems do these wheels pose?

[FaLKoN240]

not to be even considered for someone trying to put these on a stock bodied s13 or s14. these wheels will require modification to fit.


There, that is the answer. Some form of widebody, they aren't going to fit on a STOCK body.

[qt_240]

damn, i never even crossed my mind...what problems do these wheels pose?

well your gonna need ALOT BIGGER FENDERS.. and honestly i dunno if they fit at all fine in the front...

[SilviaDriver]

damn, i never even crossed my mind...what problems do these wheels pose?

you actually thought those would fit on our cars? your looking at like BN sports or something

our cars can run 9" close to a +6 with minor fender roll. that is a -69mm. add 20mm fenders and the wheel STILL wont fit

[chmercer]

its not bad man. i was just joking. just get them and be a baller. i was gonna get them and use them on my car, i have version select flares.

[Hondamatic]

for the fronts you will need wide fenders then youll have to cut out the flare section and fiberglass 40mm more flare, as for the rear sameish

it would look incredibly hot

[xtreme_s14]

in other words.. S14 LeMans car?!? that would be cake! mmm.. CAKE!

[sdwyzs14]

yes as i said they wont fit without modification.. but whomever buys these wheels and does the body work correctly will have a car that will pwn all in looks and be utterly refingdiculous.

[Siizzzoooo]

no no you guys, i meant mechanically, would it adversely affect the suspension components.

I have no fear in running flares, camber and stretch tires

[qt_240]

the back shouldnt be that bad.. but the front is what im worried about.. i mean no matter what the camber i dunno if the wheels will clear anything..... u should go to a shop and ask around with those specs.. ..SICK wheels though!

[RSP13-Sideways]

Hahaha someone is going to buy these and change their whole car setup for a set of wheels.....good luck, but with those offsets version select flares isn't going to cover damn thing.

Sick ass wheels but damn those offsets are rough as hell......maybe on like a GS300/400 or SC300/400 but I couldn't imagine those on a 240SX with anykind of widebody.......

[qt_240]

agreed.. i was gonna but them for my FD.. but im still uneasy.. about it..

[sdwyzs14]

you guys should get out go see some of the world, namely japan. ive seen even nastier wheels on s13 and s14. the only mechanical thing is the stress on the bearings. they will clear everything else exept the body..chmercer could have put them on his car with only a little bit more work. he is already running sick wheels on his car Front - 18x10 offset 7 Rear - 18x12 offset 22

here is the thread about his car
http://forums.nicoclub.com/zerothread?id=120146

[RSP13-Sideways]

you guys should get out go see some of the world, namely japan. ive seen even nastier wheels on s13 and s14. the only mechanical thing is the stress on the bearings. they will clear everything else exept the body..chmercer could have put them on his car with only a little bit more work. he is already running sick wheels on his car Front - 18x10 offset 7 Rear - 18x12 offset 22

here is the thread about his car
http://forums.nicoclub.com/zerothread?id=120146

I've actually been out and seen some of the world, I went to the University of Meiji Gakuin for 3-months studying abroad stayed in Totsuka in the Greater Yokohama Area.....I'm telling you those offsets are fuckin' rediculous. I would love for someone to run them on their S13/S14 but it's going to be a stretch.

I'm guessing it's going to look something like this....
http://img195.imageshack.us/img195/7003/vipstylemar05012gw.jpg

[qt_240]

w0w talk about CAMBER!!!!

[sdwyzs14]

with the right body work it would look nothing like that....and as for going and seeing some of the world you are the exeption to the rule then. as far as i know and have seen many people's concept of seeing the world is the internet. when i was in japan i saw numerous examples of cars with retarded offset rims done the right way, not with 2982357 degrees of camber like that honda.

[anghellic]

I'd love these on my S13 but how wide would the car have to be to make these wheels fit flush, and what is the right way to do it?

[marshun]

you can always put on the wide body and then put flares on top of the wide body.

sick wheels though for sure.

[sdwyzs14]

thats the only way i can think to do it marshun.

[chmercer]

ok everybody. just want to say. the rear will fit with version select frp fenders alone. anyone who says it wont, is a retard. 50mm or 20mm or whatever measurments on FRP body panels are totally arbitrary. its just a sheet of fiberglass. fiberglass is very flexible, and it is very easy to increase or decrease the width of a rear widebody fender depending on how you mount it to the body. if i had to guess i would say that I added 4 inches of width to the rear of my car with the version select 30mms or whatever. so does that make them version select +100s? who knows. but yea sdwyzs14 is right you guys need to get out and see the world. as long as the wheel bolts to the car, it can fit.

http://img160.echo.cx/img160/5665/picture0058wz.jpg

pretty obvious what i mean in that picture.

[RSP13-Sideways]

Actually it's not obvious. The only obvious thing is a widebody rear overfender with an unknown wheel with unknown specs.

[SilviaDriver]

Actually it's not obvious. The only obvious thing is a widebody rear overfender with an unknown wheel with unknown specs.

Front - 18x10 offset 7
Rear - 18x12 offset 22

[elphkotm]

Nice wheels... those are like S2000 offsets.

[TheTicTac]

S2000's can run low offsets? I would like to see that.

[s2kwndl]

S2000's can run low offsets? I would like to see that.

prolly with mastergrade bodykit... those are sick...

[s2kwndl]

if those will fit on msport 50mm over fender rear ill take it....

[windingroad86]

i thought's s2k offsets are high 40's to low 50's?!?!

[rancid240]

i thought's s2k offsets are high 40's to low 50's?!?!
They are. I think the guy who said these are s2000 offsets confused the -69 with +69.

[eyustfu]

s2k offsets are more like 55+

[slownslurious]

even in that picture you can tell the wheels are going to rub without some hardcore camber, there is like 1" or less between tire and fender. 18x12 +22 is still a lot more flush than the wheels being sold, if their offset is correct.

[chmercer]

Front - 18x10 offset -7
Rear - 18x12 offset -22

fixed ;)

The message you have entered is too short. Please lengthen your message to at least 10 characters.

[slownslurious]

still not as hardcore as those volks. I want to see them fitting to something I don't care if they dont clear brakes or body or whatever just bolt them on and take a pic
SOMEONE DO IT

[240SeXy!]

are these still for sale? :goyou:

[sdwyzs14]

yes they are....ive had two buyers flake one just disapeared. and the other was having paypal problems

[SLUG]

i am for real, i can come up with 1500 PLEASE E-MAIL ME!!!
i would really love to have these rims, where in so-cal are you, i can pick them up this week.
please e-mail me [email protected] or call me 808 232 6383 please leave a mesage if i dont pick up. i can have the money monday.