Converting auto to Stick

[srs14]

I have a 95 240 with a 5-speed red top. It got totalled and I cant find any stick s14's. But I have found many auto ones. How hard is it to swap pedels and everything from my car to the auto one. Ive never done a pedel swap before but i heard you need to drill a holes in the firewall. I have everything from my car so I have a complete swap. I just need to learn how to. Please help if you know anything.

[Pstl_pete]

ITs easy. Simply remove the clutch pedal, drill the holes in the auto, they are marked already and slide your clutch pedal through. Run a clutch hard line and cut your brake pedal unless you feel you want to swap that out aswell for the manual one.

You will also need to transfer this stuff from your stick S14:
Manual tranny driveshaft
Manual tranny crossmember

[eyustfu]

here's a good write up for the conversion: http://www.ka24development.com/transmission_swap.html

[drift freaq]

there is a faq in the faq section titled auto to 5 speed swap. check it out use the search button

[chlatboy]

If you did the sr install, a 5 speed should be no problem. If you didnt, it should be no problem. If you need help, use the SEARCH button.

[tak-]

installing the tranny is the hardest part, and you are doing that anyways. Other than that, you just need to put up the pedals/master cylinder wich takes like 5 mins, and remove the interior trim for the shifter, and install the drive shaft.