JDM Climate into USDM Climate Control

[240silvia]

Has anyone done this? If so, was it a bitch???? The only I have heard to do it, is cut the USDM harness, cut the JDM harness, and splice them together. Anyone know? Thanks, Charles.

[SilviaDriver]

no. its not that simple. yes its been done. search freshalloy.

search is ur friend.

[240silvia]

I searched. I ALWAYS search b/c of ppl like you, that put "search" I found 1 post on here. If you can find more, be my guest.

[Meister_S14]

http://i16.photobucket.com/albums/b27/Gangsta_S14/ClimateControlforPosting.jpg

The person who wired up my motor swap did mine. If you have the harness and all the sensors it can be done. It's pretty bad ass. You set the cabin temperature and forget about it.

[240silvia]

any idea how many sensors there are?

[Meister_S14]

Sunload sensor, in cabin temp sensor, aspirator sensor, ambient temp sensor (goes under hood) and the fan control amp from a JDM s13 w/digital climate control (s13 one has a flush mount plate which makes fitment MUCH easier)

Find a jdm clip with the digital climate control unit and rip out the whole harness and everything attached to it. Or you can piece the parts together from USDM Nissans or Infinitis that have digital auto climate control as well.

[Rezlo]

Do the US cars come with a third harness taped to the two normal climate control harnesses, I have a EU 97 S14 with normal climate thats broken and I see i have a 3rd harness just sitting there.

Meister dont suppose you still have your old one u want to get rid of cheap? I cant seem to set the air out of the heater core very will with no heater :( damm valve stuck shut