Tranny drain plug/bolt

[cr00k_lyn]

Was wondering what socket size to use to take off the tranny bolt on the sr20? b/c i either have one that is a bit too small and causing it to strip or either a size thats alil too big.

[black s13]

if its the same as KA you need a 19mm open end for the fill and a 1/2" drive for the drain.

[aznpoopy]

Was wondering what socket size to use to take off the tranny bolt on the sr20? b/c i either have one that is a bit too small and causing it to strip or either a size thats alil too big.

:D

you're not using sae tools, are you?

if its the same as KA you need a 19mm open end for the fill and a 1/2" drive for the drain.

thats weird. i have 3 ka trannies and they are all just 1/2" drive for fill and drain.

[420sx]

yea its same drain plug for open/drain. 1/2 drive

[black s13]

wtf... i defenitly have a 19mm square plug, oh well.

[projectRDM]

Some have a square plug, some are recessed 1/2". I've got seven KA transmissions right now, they're all recessed.

[kandyflip445]

Mine is a square plug for the fill. I always thought it should come with the same plug as the drain. Weird.