MakotoS13
09-03-2005, 10:45 AM
okay guys here it is. i dont have a backlash gauge to check it but i want to make sure before i put this pumpkin back in the car.
so i have the S15 HLSD diff in the pumpkin, ring gear on, and bolted in. now, there's a fat shim and two thin ones. the fat one has to stay on its side because its like a .25 inch shim and thats almost the height of the teeth on the ring gear. i would think that if you got it backwards the teeth would barely touch and you'd grind em off, in any case i'm double checking.
i'm basically eyeballing the backlash. its barely visible wtih the naked eye. like, you have to stare at one spot and move the ring gear while holding the pinion gear to even see the slightest movement. this should be less than 1mm but i have no way of knowing scientifically since i lack the backlash gauge. you can feel it and hear it but the movement just isn't that much.
is this normal?
so i have the S15 HLSD diff in the pumpkin, ring gear on, and bolted in. now, there's a fat shim and two thin ones. the fat one has to stay on its side because its like a .25 inch shim and thats almost the height of the teeth on the ring gear. i would think that if you got it backwards the teeth would barely touch and you'd grind em off, in any case i'm double checking.
i'm basically eyeballing the backlash. its barely visible wtih the naked eye. like, you have to stare at one spot and move the ring gear while holding the pinion gear to even see the slightest movement. this should be less than 1mm but i have no way of knowing scientifically since i lack the backlash gauge. you can feel it and hear it but the movement just isn't that much.
is this normal?