PDA

View Full Version : SR20 Part Out! MUCH Performance, Stock LOOK


mastaflash05
09-03-2005, 10:02 AM
Well since i had some top end engine failure from overreving the engine i am going to part my engine related stuff out. There are Many performance parts here, and i will not take lowballs so please dont try. on to the list...

Turbo / Fuel Setup - PACKAGE ONLY
good for 350+HP
includes...
-Precision SC61 Turbo w. polished cover
-JGS log exhaust manifold
- tial 38mm wastegate
- Turbo extention/downpipe
- Modified Hotpipe w/ greddy flange. polished alm.
- Greddy Type S BOV
- Oil Feed and return lines
- JGY top feed fuel rail
- MSD 72lb. Injectors
- Aeromotive FPR with Gauge
- Aeroquip Stainless lines and 6AN fittings
- Z32 Maf
- Scott Avoi(Enthalpy) Tuned ECU

selling /\ as a package only, asking 3000OBO.

Gaskets and related stuff
- OEM S15 multi layer Exhaust Gasket 50 NEW
- OEM Thermostat 25 NEW
- OEM Valve Cover gasket 25 NEW
- OEM Spark Plug Well gaskets 25 NEW
- OEM rear main seal 20 NEW
- Thermal Designs Thermal Spacer Intake Gasket 50 NEW
- OEM coolant hoses 50 used

Engine Top End
- Greddy RAS 60 NEW
- ARP Head Studs 125 NEW
- Valve Cover Beginning Polished 100
-Peak Performance Gold valve springs - 180 NEW
- Crower Titanium Retainers 160 NEW
- Jim Wolf Tech Cams and Adjustable Gears - 600
- Disassembled Head
---Has all stock parts, just needs maching work and reassembly. i was going to rebuild the head, but i dont have the time or money. i just want to get what i can from it. i overreved and broke rocker arms and droped 2 valves. i have new vlaves, and the parts above to fix the head to make it nice. if interested email me.

Other Performance Items
- Greddy Intake Manifold 350
- Greddy engine/Trans Mounts 175
- Greddy Intercooler core, few bent fins, good con. 300
- Turbo Blanket turbo heat Shield 100 NEW
- Power enterprise Air filter 40 used
- JGY Air filter 20 - like new, cracked mounting bracket, nothing serious.
- Nice polished Aluminum Radiator w/ electric fan and adjustable fan thermostat. 400
- Megan Racing Lightweight Pullies 100 NEW
- B&M short shifter 150
- Spec Stage 2 Clutch, used 90

Electronics/Gauges
-Apexi full auto Turbo Timer w/ harness 120, like new cond.
-Autometer boost/vac(30-0-30), and oil pressure(electric w/ sender) gauges in Pod 120

OTHER
- SR wiring harness wired for redtop S13 300
- Ignitor Chip 125
- Ignition Coils 100
- Camshaft Angle Sensor 125
- Starter 150
- Oil Pump 100
- Lower oil pan 50
- Transmission good cond 250
- Stock Flywheel 50
- Engine Block, small marks in 1 piston from valve hitting - 350
- Water Pump 50
- Power steering Pump w. Bracket 100
- Alternator w. Bracket 125
- Throttle Body 40

i may add more to the list if i forgot something. If you need something i dont have listed, ask.

adtl. info

Located in Cincinnati Ohio.
Email - [email protected]
AIM - MastaflashGT

noodl35
09-03-2005, 12:17 PM
what kind of valves did you end up buying? How much would you sell the valves for?

DJPimpFlex
09-03-2005, 09:32 PM
interested in a few things. PM sent.

mastaflash05
09-04-2005, 09:13 AM
pm sent.

valves purchased are OEM Nissan ordered from Phase2motortrend. I will sell them for 45 shipped. there are only 2 new valves.

Projekt_Sil80
09-04-2005, 10:33 AM
Interested in a FEW PARTS ALSO, pm SENT.

whooha1217
09-06-2005, 12:10 AM
interested in the headstuds... do u have headgasket as well?

240KAT
09-09-2005, 04:44 AM
how many miles on clutch, also are the stock flywheel and spec stage II clutch the setup you used in your car together (as in, do i need to get that flywheel machined?) Shoot me an email
[email protected]

dangermouse73
09-13-2005, 12:26 AM
How much for the hotpipe and bov shipped to 30064?? [email protected] :coold:

09-13-2005, 01:38 AM
how much for short shifter shipped to 90703

SILten
11-13-2005, 01:45 PM
how much for the head plus shipping to 27604

toekneex04
11-13-2005, 07:02 PM
the turbo extension is bigger than stock, right? what brand is it? how much for it shipped to 95035?

sblack13
11-14-2005, 12:11 AM
How much for the hotpipe and bov shipped to 30064?? [email protected] :coold:

i would like to know as well, but to 98422.

go240
11-15-2005, 03:20 PM
if you part the turbo set-up out i'll be interested in some things (turbo and wastegate)