So heres the project %80 complete

[DJPimpFlex]

So I've been working on this car for about 2 years now and its finally getting complete. Just wanted to share it with you guys.

http://i2.photobucket.com/albums/y32/DJPimpFlex/ada51e8a.jpg
http://i2.photobucket.com/albums/y32/DJPimpFlex/ce0141ab.jpg
http://i2.photobucket.com/albums/y32/DJPimpFlex/86386d91.jpg

Heres the mods:


Engine:
SR20DET Red Top
Greddy VLSP Intercooler Kit
Enjuku Racing hot pipe
HKS SSQV
Unorthodox Racing Crank Pulley
Koyo Radiator
Greddy Radiator Cap
Flex a Light Dual 12” Fans

Samco Radiator Hoses
Nismo Thermostat
Nismo Engine Mounts
Greddy Airnix Air Filter
Battery Relocated to trunk with Gensis Battery
Walbro 255lph Fuel pump

Driveline:
Nismo Transmission mount
B&M Short Shifter
Exedy Stage 1 Clutch
T3 Sub frame Spacers
Locd V3 Welded Differential
Enjuku Racing Aluminum Drive shaft

Suspension:
KTS Coilovers
Battle Version Tension Rods
Battle Version RUCA’s
Battle Version Forward Link
Battle Version Lateral Link
Tanabe Drift Spec Sway bars
CP Racing Strut Tower Bars
Tein Inner Tie Rods
KTS Outer Tie Rod Ends

Exhaust:
SSAutoChrome Exhaust Manifold
Greddy Turbo Extension
Greddy Down Pipe
Megan Racing Test Pipe
RS*R GT2 Catback Exhaust
Nismo Exhaust Hangers

Wheels and Tires:
Volk TE37’s
16x7 +35 Front
16x8 +32 Rear
Yokohama Es100’s
205/50/16 Front
205/55/16 Rear
Advan SA3R
16x7
One Ton Garage 10mm Wheel Spacers
Koy-Ei 50mm Wheel Studs
Volk Racing Lug Nuts

Brakes:
Z32 26mm Aluminum calipers
Cross drilled and Slotted Brake rotors
SPL Steel Braided Brake Lines
15/16” Z32 Master Cylinder
Super Blue Racing Brake Fluid

Exterior:
Silvia Front End Conversion
Versus Carbon Fiber Hood
Carbon Fiber Race Spoiler
OEM Side Skirts

Interior:
Bride Zeta III Type L
Bride Super Low Rails
Gforce Racing 5pt Harness
Greddy Electronic Boost Gauge
Apexi SAFC II
NRG Quick Release
Removed sound deadening
Longacre Carbon Fiber Starter switch pannel

It has a new bumper that isnt all fucked up on it now and everything lines up. Paint is soon. I just got a trailer and am going to start hitting the track soon. The car is FAST and really fun to drive. It makes it all worth it when you drive it. 2 years of never driving the car that I've put so much money into. Crazy. Let me know what you think!

[infinitexsound]

go speed racer go! needs paint...and better wheels a little lower..........cant wait to see the finished product... congratulations man.... 2 years is a long time glad to see ur patience paid off...

[ghostuss]

man that car has it's color of it's own man. DOn't diss the missed matched.

Ok. I think you want a roll bar or some kind of cage. Also better rims, something with a fat 2-3inch lip hehe...

[DJPimpFlex]

better whells?!? Volk TE37's are just fine with me. I'm just not so cool on the huge wheel look. Smaller wheels are almost awlays better for performance. No compromise all race.

[JaeTea]

Is posting pics in OT the new way to get out of actually following the rules and posting in the pictures thread?

[Phlip]

Is posting pics in OT the new way to get out of actually following the rules and posting in the pictures thread?
it is that NEW loophole, kinda like asking questions that have been asked a million times, but saying "I searched" so as to not get burned

[smellslikecurry]

lets burn him at the stake...

[FaLKoN240]

LOL, I was wondering why all these pics weren't in the pic thread. . .

But then again, the list of mods definately isn't criteria fitting into the picture thread, so maybe he HAS found a loophole in the pic thread rules.

[rancid240]

not feeling the wing

[Phlip]

LOL, I was wondering why all these pics weren't in the pic thread. . .

But then again, the list of mods definately isn't criteria fitting into the picture thread, so maybe he HAS found a loophole in the pic thread rules.
No, you can list the mods and shit in the picture thread, in fact it is the preferred method to avoid the "OMFG, what kinda wheels are those?" questions from cluttering up the picture thread like they did the first one.

[mistaanime]

not feelin the spoiler either....hows about getting a zenki lip? but everything else looks great...well when you paint it. heh

[DJPimpFlex]

yea I need a lip. I know no one but me likes the spoiler, but whatever. I dont really dig the wangan or type x. This is a little bit more unique, except I saw it on another S13 and thats where I got the idea. I didnt know about some loophole thing, but if its a big deal I can take the pics down.

[SimpleSexy180]

Is posting pics in OT the new way to get out of actually following the rules and posting in the pictures thread?

THATS A BOUGIE ASS THREAD you cant even post without having a pic

[No Motiv]

Nice setup....

seems pretty balanced.... now go paint it one color!

[DJPimpFlex]

THATS A BOUGIE ASS THREAD you cant even post without having a pic

WHAT?!?!? I'm confused......

[Revolver Ocelot]

I never knew they made five spoke Te37's. I always thought they were six spoke. :duh:

[DJPimpFlex]

They made them in 5 spoke up until 1997 (or at least thats what the inside of the wheel says). I've only sceen 2 sets of 5 spoke TE37's and only one in white (mine). I love these rims.

[SimpleSexy180]

WHAT?!?!? I'm confused......


lol its a dumb thread because you cant comment without a pic

[Tenchuu]

the wing is like the one (and only) wing you can buy on GT4. can't say i cared for it on the game, so it kinda carries over. but at least it's not a aluminum dual wing shopping cart handle.......could have been alot worse. but screw what everyone else thinks, If you like it it's better than any comment you'll get here

[NemeGuero]

it looks.. yah..

NICE MODS! haha

[vinhisbored]

They're still called 'TE37's though? I didn't know that.. haha

[Jcb890]

i hate the wing and the color of the rims (white w/ blue... looks tacky). i'm not a big fan of the lights either but, thats the "JDM tyte" thing to do, so w/e. otherwise, looks nice and i bet its pretty quick.

1 question... why the hell has it taken you 2 years to get so far? lol.

[mistaanime]

the wing would look tite..if you get wide body with hella flush rims hehe

[DJPimpFlex]

i hate the wing and the color of the rims (white w/ blue... looks tacky). i'm not a big fan of the lights either but, thats the "JDM tyte" thing to do, so w/e. otherwise, looks nice and i bet its pretty quick.

1 question... why the hell has it taken you 2 years to get so far? lol.


Well I happen to love the wheels, and thats my personal preference. The lights are MUCH lighter than USDM stock. No motors or anything. Also the cf hood is hella light. The lighting is also much better than usdm stock. Thats why I got 3 projectors instead of bricks. If you look at the caliber of the mods I have I think I've done pretty good without any help from anyone financially. I'm 19 and I work for $11/hr and I have to pay rent and bills and shit. On top of that I have a car that is worth over $15,000 that I OWN. No payments of other BS. I think I've done really well comming from a shell to this. So 2 years is pretty damn good if you ask me.

[DJPimpFlex]

They're still called 'TE37's though? I didn't know that.. haha

yea they say TE37 on the inside of the wheel.

[Jcb890]

Well I happen to love the wheels, and thats my personal preference. The lights are MUCH lighter than USDM stock. No motors or anything. Also the cf hood is hella light. The lighting is also much better than usdm stock. Thats why I got 3 projectors instead of bricks. If you look at the caliber of the mods I have I think I've done pretty good without any help from anyone financially. I'm 19 and I work for $11/hr and I have to pay rent and bills and shit. On top of that I have a car that is worth over $15,000 that I OWN. No payments of other BS. I think I've done really well comming from a shell to this. So 2 years is pretty damn good if you ask me.

if you have to pay a high rent, then i can see why. what car is worth over $15,000? you must own another car right? :coolugh:

[DJPimpFlex]

no, list out the parts and you have over $15000. Heres the list.
Engine:
SR20DET Red Top - $2200 clip + $1000 install
Greddy VLSP Intercooler Kit - $700
Enjuku Racing hot pipe - $289 w/ BOV
HKS SSQV
Unorthodox Racing Crank Pulley - $100
Koyo Radiator - $309
Greddy Radiator Cap - $21
Flex a Light Dual 12” Fans - $239
Samco Radiator Hoses - $119
Nismo Thermostat - $50
Nismo Engine Mounts - $170
Greddy Airnix Air Filter - 80
Battery Relocated to trunk with Gensis Battery - $110 + $50
Walbro 255lph Fuel pump - $89

Driveline:
Nismo Transmission mount
B&M Short Shifter - $130
Exedy Stage 1 Clutch - $230
T3 Sub frame Spacers - $50
Locd V3 Welded Differential - $70
Enjuku Racing Aluminum Drive shaft - $400

Suspension:
KTS Coilovers - $1100
Battle Version Tension Rods - all for $500
Battle Version RUCA’s
Battle Version Forward Link
Battle Version Lateral Link
Tanabe Drift Spec Sway bars - $290
CP Racing Strut Tower Bars - $215
Tein Inner Tie Rods - $80
KTS Outer Tie Rod Ends - $189

Exhaust:
SSAutoChrome Exhaust Manifold - $25
Greddy Turbo Extension - $214
Greddy Down Pipe - $80
Megan Racing Test Pipe - $50
RS*R GT2 Catback Exhaust - $390
Nismo Exhaust Hangers - $50

Wheels and Tires:
Volk TE37’s - $875
16x7 +35 Front
16x8 +32 Rear
Yokohama Es100’s - $320
205/50/16 Front
205/55/16 Rear
Advan SA3R - $300
16x7
One Ton Garage 10mm Wheel Spacers - $50
Koy-Ei 50mm Wheel Studs - $70
Volk Racing Lug Nuts - $90

Brakes:
Z32 26mm Aluminum calipers - $420
Cross drilled and Slotted Brake rotors - $80 rear
SPL Steel Braided Brake Lines - $80 rear
15/16” Z32 Master Cylinder - $75
ATE Super Blue Racing Brake Fluid - $15

Exterior:
Silvia Front End Conversion - $180 + 45+120+60+50
Versus Carbon Fiber Hood - $400
Carbon Fiber Race Spoiler - $200
OEM Side Skirts - $220
180sx Rear Center Piece - $45
Sparco Hood Pins - $35

Interior:
Bride Zeta III Type L - $800
Bride Super Low Rails - $130
Gforce Racing 5pt Harness - $119
Greddy Electronic Boost Gauge - $95
Apexi SAFC II - $200
NRG Quick Release - $85
Removed sound deadening - $100
Longacre Carbon Fiber Starter switch pannel - $80

So that adds up to $14,928 + all the parts I had to re-buy (fenders, master clyinder, corner lights . . the list goes on), and labor for other things besides engine install (I did most my self, but somethings had to go to the shop.) Paying for the car to be transported arround via trailer (I have a friend with a trailer so he took it around for me for cheap, but it still adds up. I had to drive 6+ hours to get the shell.) So anyway I have spent well into $15k, and I got really good deals on a lot of stuff. The battle version linkage I got all of it and a parts car for $500 from Alex Pfiffer. So there you go.

[lucky7]

lol its a dumb thread because you cant comment without a pic


i agree 100%.

[rancid240]

Z32 26mm Aluminum calipers - $420

umm...typo?

And also your car isnt worth over $15k. You spent over $15k for it.

[DJPimpFlex]

Z32 26mm Aluminum calipers - $420

umm...typo?

And also your car isnt worth over $15k. You spent over $15k for it.

well it was $420 for the whole brake setup up front (pads{axxis}, rotors, lines, calipers [rebuilt]). All the other prices are for the rear only. I know its not worth $15k, but i could part out for close to that, but thats how much I spent.

[Jcb890]

yeah, i forgot how quick it adds up and i skipped over a lot of what you wrote down. pretty nice lookin car, not what i'd do myself, but its nice and looks to be done right. was the car hit in the front though before? the headlights dont seem to meet up perfect with the hood. what color is the car gonna be painted? i'm guessing the same color blue as the frims.

the sad thing is, i bet you could get close to $15,000 for it from some retarded sucker in Cali once its painted.

[mistaanime]

geez...15k spent..and you still need paint. hee

[Neo Yakra]

Nice...i like the setup, Its your car...so i wouldnt care what people thought unless you built the car for other people...

[DJPimpFlex]

yea no its pretty good. its going to be silver. The conversion needs a little tuning, but the cars never been hit. It was an automatic car, so it want driven hard.

[theicecreamdan]

just because its auto doesn't mean it wasnt driven hard.
I drove the hell out of my auto. (as much hell as my mediocre driving would allow)
I picked up a coupe from a guy that drove the hell out of it.

[ThatGuy]

Error 606:

Loop Hole to Picture not found. Thread Locked.



To those of you that have a problem with the new Picture Thread...
Tough Shit, end of story. Everyone complained that the old Thread was a mass of bullshit comment posts with too few pics. Not you're complaining there are too many pics and not enough comments?? Use the PM feature provided by Zilvia if you wish to ask a question or comment on someones car. If you're butthurt that people can't tell you how "Super JDM Kewl!!" you are because of your car, then go play on Cardomain or RateMyRide, not Zilvia.net.