S13 blacktop swap with ALOT of goodies COMPLETE over 500hp

[drpimper746]

This is a complete SR20 red top swap with a S14 SR wiring harness. Here is how the motor sits in the car right now....

-S13 motor S14 trans
-Power Enterprise/Exedy twin disc clutch/flywheel
-B&M shifter
-Nismo motor/tranny mounts
-JGS top mount turbo manifold
-Precision SC61 turbo (1k miles on the center section) custom V-band ex. housing
-Boost Logic turbo blanket
-Tial 38mm wastegate
-3" stainless steel downpipe with wg routed back in
-Blitz front mount i/c with Blitz aluminum i/c piping
-Tial blow off valve
-T-bolt clamps throughout
-Cometic head gasket'
-ARP studs
-Comp valvesprings
-Crower Titanium retainers
-HKS 272 step 2 in/ex cams
-Brand new oem black top valve cover
-Greddy (not the knockoff) intake manifold
-Precision 880cc injectors
-Aluminum fuel rail -6AN fittings
-SX regulator and all lines needed
-FBR radiator w/ Spal fan
-Samco upper radiator hose
-AEM EMS
-GM 3bar map
-AEM

http://www.uploadpixels.com/upload/1125373920_uploadpixels.com_my_s13_motor.jpg

http://www.uploadpixels.com/upload/1125373938_uploadpixels.com_my_s13_motor_2.jpg

http://www.uploadpixels.com/upload/1125373946_uploadpixels.com_my_s13_motor_3.jpg

This motor is SUPER clean inside and out. All items were purchased BRAND NEW by me and installed by by robbie seals (300sx). It is still in the car so you can "drive before you buy" :thumbsup:

This is a COMPLETE 500hp capable setup! i am selling because i am doing a new swap into the car. i am loosing alot of money on this deal. your gain my loss.

I am asking $7500 for EVERYTHING but I will also remove some of the big ticket items and can get the price around $5000.

i can't seem to delete my other attachments so it says ive max out the file size. so i can't post pics. i have great pics of everything i can email them to you or u can check them out on http://forums.freshalloy.com/ubbthreads/showflat.php?Cat=&Board=UBB24&Number=68000928&page=0&view=collapsed&sb=5&o=&fpart=1

also you can email me at [email protected]

[tnkw]

how much JUST for the motor.

ie, no tranny, ecu, FMIC, standalone and blah blah blah.. just the motor.

[drpimper746]

no i will not sell just a motor. i will sell a complete swap then if they don't want all the parts on it i can put stock back on. but turbo setup is going with the motor no matter and the built head.

[drpimper746]

i just added pictures of the motor. it is prolly one of the cleanest motors around.

[fliprayzin240sx]

Well if you change your mind as far as parting it, im interested in the turbo setup.

[burnsmonkey]

Would you wanna swap valve covers? I have a brand new OEM Red Top excellent condition, I want a black cover since my engine is turning into a rainbow with all the different colors. Let me know if your interested. Thanks

[drpimper746]

sorry my valve cover is brand new. i just bought it when i built the motor. its one a few weeks old. this motor looks and is brand new all the way through.

[drpimper746]

i have the motor swap sold but without a few items. these items are still for sale individualy. i need to get rid of them because i won't have any use for them.
1.S14 aem ems 20-1622 (barely used)
2.s14 greddy intake manifold (NEW)
3.s13 greddy intake manifold (barely used)
4.Entire top feed fuel sytem for s13 or s14 with fittings and all hose need using a sx fuel presure regulator and has 880cc (84lbs.) or 550cc (50lbs.)
its the only s14 topfeed fuel sytem made used custom spacer to clear the manifold. i have all pics of the fuel sytem.
5.stock s14 ecu
6.fwd sr20 cometic head gasket
7.stock s13 and s14 cams
8.everything for a stock head (spings, retainers, ect.)
9. s14 aac valve

[rps13_fastback]

i have the motor swap sold but without a few items. these items are still for sale individualy. i need to get rid of them because i won't have any use for them.
1.S14 aem ems 20-1622 (barely used)
2.s14 greddy intake manifold (NEW)
3.s13 greddy intake manifold (barely used)
4.Entire top feed fuel sytem for s13 or s14 with fittings and all hose need using a sx fuel presure regulator and has 880cc (84lbs.) or 550cc (50lbs.)
its the only s14 topfeed fuel sytem made used custom spacer to clear the manifold. i have all pics of the fuel sytem.
5.stock s14 ecu
6.fwd sr20 cometic head gasket
7.stock s13 and s14 cams
8.everything for a stock head (spings, retainers, ect.)
9. s14 aac valve

interested in the stock s14 ecu. is it NA or WC?

also interested in the s14 intake manifold. you have PM