95-96 Z32tt Injectors

[95Blue240sx]

Well I got some injectors from a 95-96 twin turbo Z. The connector is different from the stock 240 ones. I checked and the z32 ones are high impedance. I can get a hold of the right injector plug from my work. I just want to know if there is anything different about the 95-96 tt injectors, compared to the 90-94tt injectors, besides the plugs.

Thanks

[Jeff240sx]

You got injectors from a '90-94 Z. '95-'96 are the ones that are a direct swap for us.
Other than plugs.. they're fine. However, I do have a set of connectors for those injectors. PM me if you want them.
-Jeff

[95Blue240sx]

Oh ok. Well someone else told me they were 95-96, but i guess they are the earlier model ones. Thanks for the offer, but i can get them for like $3 each.

[sr240mike]

Hahaha, I had the exact same problem. Do this, pop out the orange rubber insulator and they'll fit. The pintle design is different between the years. 95-96 have 4 holes in the end of the injector. I tried the earlier models but it didnt diperse well and pooled in the intake. It was either that or all 4 were bad.

[[email protected]]

90-94 TT injector are square connectors and are often troublesome when it comes to reliability, later model ones are oval looking connectors that sorta resembles a 9005 headlight connector and have larger inj seats, they flow and atomize fuel better and are far more reliable.

[95Blue240sx]

Really? That sucks! Makes me want to sell these and get some 95-96 ones =\ Are the 95-96 ones suppose to be the solution to the Z32 injector problems?