Is this a good price?

[cr00k_lyn]

Is 500 a good price for s14 front spindles/hub and rebuilt z32 capilars?

Thanks

[cr00k_lyn]

yes, no, ...lol somebody must know the pricing on these parts

[Pank]

Just for the front?

[rancid240]

its an alright price. You could get 5 lug aftermarket hubs for around $350 and used calipers for $150, same price but a lot less work. Keep in mind you will need s14 LCA or ball joints and spindle sleeves or modification to shocks if you use the s14 spindle.

[cr00k_lyn]

its an alright price. You could get 5 lug aftermarket hubs for around $350 and used calipers for $150, same price but a lot less work. Keep in mind you will need s14 LCA or ball joints and spindle sleeves or modification to shocks if you use the s14 spindle.


For the front's i would?

[rancid240]

yes....................

[cr00k_lyn]

Thanks, how about if i found s14 rears what is needed for that to bolt up? LCA also?

[rancid240]

no, just hub. redrill rotors

[cr00k_lyn]

I thought all i needed to do is to press into your s13 control arm.

wrong?

[rancid240]

For the fronts w/ s14 parts?
You need s14 ball joints pressed into s13 LCA or s14 LCA. And you need spindle sleeves or s14 strut bolts w/ widening of s13 strut.

For rear its simple. Remove hub, install hub. If your rear rotor is 4 lug you need a 5 lug rotor or redrill.

[cr00k_lyn]

Man im about to opt for the attain, or gto 5lug hub, and save myself some headaches...

how about those z32 capilars(fronts) for 300. is that a deal or not so.

thanks again..

[rancid240]

just calipers for $300? I wouldnt spend that much.

If your on a budget, try to find some in a junkyard, or look on ebay. When I sell sets on ebay they go for ~$150.

I would suggest you go for the aftermarket hubs since they are cheaper moreso than before. Saves headaches on install and if you ever want to bring the car back to stock.

[cr00k_lyn]

just calipers for $300? I wouldnt spend that much.

If your on a budget, try to find some in a junkyard, or look on ebay. When I sell sets on ebay they go for ~$150.

I would suggest you go for the aftermarket hubs since they are cheaper moreso than before. Saves headaches on install and if you ever want to bring the car back to stock.


yeah just capilars fully rebuilt with clips, and all.

thanks again.

[sykikchimp]

from archive.

http://www.zilvia.net/f/showthread.php?t=68520

and you can buy rebuilt calipers from Autozone for DIRT.. and they will accept your stock calipers for the core charge.