Part Number for JDM S14 Kouki front lip [Archive] - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

07-25-2005, 06:43 AM

Hi.

Anyone got the part number or a lip they want to sell. (But more interested in the part number)

Got to be the original JDM Kouki Lip

Thanks

C.

OptionZero

07-25-2005, 12:53 PM

PM "Turdz" he has the lip (not for sale) and might be able to get a part # off of it.

TurDz

07-25-2005, 02:22 PM

Sorry, I never bothered to actually record the part number, it wasn't obvious at all either (stamped very fainly). And I don't think I'm taking off the lip ever...hehe. unless I crash my front end, knock on wood.

good luck

SimpleS14

07-25-2005, 07:44 PM

Damn you.......

S14DB

07-25-2005, 08:43 PM

It's typically not stamped on urethane parts. It's only on the box.

07-26-2005, 05:01 AM

Bummer , i have a possible part number but i am not sure that is correct.
and don't want to order one if its wrong.

k6010-80F50

Also see

http://www.sxoc.com/vbb/attachment.php?attachmentid=15518

Any help would be great.

I have not yet see a nissan part that did not have a part number on it.

Even my Z-edition valance has a part number on it.

C.

07-26-2005, 05:18 AM

just found your fitting guide
http://www.zilvia.net/f/showthread.php?t=73951&highlight=kouki

Nice, how much lower is it than the std kouki bumper?

Thanks

C.

OptionZero

07-26-2005, 10:08 AM

It does hang lower than the USDM Bumper, but the USDM one slants upward.

It is not significantly lower IIRC than the JDM bumper w/o lip
http://img.photobucket.com/albums/v482/OptionAero/Kouki%20Twins/DSCN1172.jpg

07-26-2005, 11:41 AM

Ok , thanks.

I have seen that the greddy lip is about 1 inch lower than the bumper with out the lip and still a fair bit higher than the std US type bumper with the lip.

Based on the photos that i found that show the screw holes i can work out a rough depth of the lip below the kouki bumper.

Will keep looking in to it as am trying to keep my car std nissan bits

So far have...

Silvia kouki grill
Silvia kouki bonnet badge
240sx front indicators
almera side indicators
200sx Z-edition valance
Silvia kouki rear wing
200sx euro rear fog (replaces the reflector blank on UK cars)
Silvia folding mirrors
350z 18" alloys
R32 GTR front brakes
S15 intercooler

to go on
S15 6 speed gearbox
S14 climate control+loom
Silvia kouki bumper and fogs and amber indicators (clears on the way).

C.

projectRDM

07-26-2005, 12:40 PM

Glad to see you stumbled over here cookie. I'm RDM over on sxoc, the US counterpart to your car.

07-26-2005, 04:18 PM

Hi.

Yep still not done the climate control.

C.

OptionZero

07-26-2005, 04:57 PM

KOUKI KA-T

07-26-2005, 04:58 PM

Ok , thanks.

I have seen that the greddy lip is about 1 inch lower than the bumper with out the lip and still a fair bit higher than the std US type bumper with the lip.

Ha, no way.
Trust lip on mine is much lower than the USDM was on that bumper. Huge difference.
And it lowers the front end by about 2"+
I love the optional JDM aero, except for the front lip. It's too high.

TurDz

07-26-2005, 08:16 PM

Ha, no way.
Trust lip on mine is much lower than the USDM was on that bumper. Huge difference.
And it lowers the front end by about 2"+
I love the optional JDM aero, except for the front lip. It's too high.

the raised front edge of the lip just helps me front scraping the front end...when my car is lowered, you'll barely notice :)

but I do understand why many may not like it. guys, it's ugly!!

07-27-2005, 02:45 AM

hey, you got the z-valence! Are those rare over in Europe? I believe i stumbled across a company that was making fiberglass replicas over in the UK, but they were still really expensive and I don't know if that every went through

There's maybe 2 others I've heard of in America

Yes very rare , i bribed nissan.de to make me this one last year from the original mould , it was fugging expensive. cost more than my wheels.

SRBPower do a look a like valance for £199 i think so that is $347 ish

pic of my car
http://81.130.138.87/JAE%202005/dscf0003.html (big pic)

C.

07-27-2005, 02:47 AM

Ha, no way.
Trust lip on mine is much lower than the USDM was on that bumper. Huge difference.
And it lowers the front end by about 2"+
I love the optional JDM aero, except for the front lip. It's too high.

i said USDM with lip is lower than the greddy/trust/gracer lip (I know i was looking at one in detail at the weekend)

KOUKI KA-T

07-27-2005, 06:03 AM

i said USDM with lip is lower than the greddy/trust/gracer lip (I know i was looking at one in detail at the weekend)

Yes I know, that's what I am talking about. I went from USDM bumper with coresponding lip to JDM bumper with Trust lip. I have both, trust lip is lower.

08-18-2005, 03:56 AM

anyone found a part number yet?

C.

OptionZero

08-18-2005, 11:18 AM

KA-T: yeah, if the jdm aero bumper (w/o option part) were maybe half an inch lower, it would blend perfectly into the rest of the aero. Plus urethane + oem fit> all

cookie: you sure u want the lip? i don't think it flows with the z-valence, but that is my opinion =P
the picture doesn't work!

get the K's wing, we can be aero buddies

dont forget to post on www.freshalloy.com, there are knowledgeable people there as well

SimpleS14

08-18-2005, 06:17 PM

OptionZero - Yashio Factory bumper is close to what your describing.

TEAMMiSCHiEFS14

08-18-2005, 10:41 PM

Here's the pic of the front lip japanparts.com found for me awhile ago.. hope it helps..

OptionZero

08-18-2005, 11:44 PM

pics? i'll search, but can you post if you got any

TEAMMiSCHiEFS14

08-19-2005, 12:28 AM

here's pics of TurDz's car..

http://img.photobucket.com/albums/v607/turdz/kouki.jpg

S14DB

08-19-2005, 12:57 AM

08-20-2005, 05:00 PM

Hi.

Thanks, missed the updates.

s14db, i think that is a custom part number (courtseyparts?)

I am pretty confident that the real part number is as i stated above ,am just working on the nissan dealer to order me one.

Let try some more pics for optionzero , oh and i already have the Kouki Se Aero wing.

http://www.r.kuczma.dial.pipex.com/350zwheels/1.jpg
http://www.r.kuczma.dial.pipex.com/350zwheels/2.jpg
http://www.r.kuczma.dial.pipex.com/350zwheels/3.jpg
http://www.r.kuczma.dial.pipex.com/350zwheels/4.jpg
http://www.r.kuczma.dial.pipex.com/350zwheels/5.jpg
http://www.r.kuczma.dial.pipex.com/350zwheels/6.jpg
http://www.r.kuczma.dial.pipex.com/350zwheels/7.jpg
http://www.r.kuczma.dial.pipex.com/350zwheels/8.jpg
http://www.r.kuczma.dial.pipex.com/350zwheels/9.jpg
http://www.r.kuczma.dial.pipex.com/350zwheels/10.jpg

Thanks guys....

C.

TurDz

08-20-2005, 05:10 PM

Wow, your car looks very very nice! I don't think you should change it at all. You even have that nicely cut rear bumper/lip to fit the exhuast...that's awesome.

Very clean...much better than my stock SE, stock suspension car heheh

08-20-2005, 05:43 PM

Hi.

Thanks, not sure if your taking the mick with the exhaust, but the Nur Spec R does move around a little gets kind of warm so i did not want a melted bumper, in person the cutout looks fine.

Its a bit cleaner than that now.

As i already have a kouki bumper with orange indicators and fogs it will be going on , but i want one last crack at getting the lip. (not sure if i am going to keep the orange kouki indicators, might get some clears)

C.

S_14.5

08-21-2005, 03:34 PM

anyone found a part number yet?

C.

ohhhh fine! here is the #:

KK6010 (Front S14 Kouki Spolier, only)
KK6014 (Front S14 Kouki Spoiler Kit, includes all mou nting brackets, screws, and washers)

These are from my macro fische files...

08-21-2005, 03:41 PM

Hi.

Thanks that ties in with the partnumber i had.

C.

SimpleS14

08-21-2005, 05:16 PM

Man I want those headlights and rear wiper.....

OptionZero

08-22-2005, 12:10 AM

shit, the pix only started working for me now. Looks hot, ditch that bumper and get the JDM One!!!

S14DB

08-22-2005, 12:43 AM

Dang, I just noticed the rear wiper. You lucky bastard!

08-23-2005, 04:27 AM

Got the JDM bumper, just working on the lip.

No one happens have a chassis number for a S14 Silvia Kouki (jdm) do they as my dealer can't order it without one.

C.

09-06-2005, 06:05 AM

Still not managed to order one yet as i still need a chassis number ,however some new pics.

http://81.130.40.69/bumper/DSCF0144a.JPG
http://81.130.40.69/bumper/DSCF0145a.JPG
http://81.130.40.69/bumper/DSCF0146a.JPG
http://81.130.40.69/bumper/DSCF0147a.JPG

http://81.130.40.69/bumper/DSCF0001a.JPG
http://81.130.40.69/bumper/DSCF0002a.JPG
http://81.130.40.69/bumper/DSCF0003a.JPG
http://81.130.40.69/bumper/DSCF0004a.JPG
http://81.130.40.69/bumper/DSCF0005a.JPG
http://81.130.40.69/bumper/DSCF0006a.JPG

C.

SimpleS14

09-06-2005, 06:32 AM

Very clean car m8. :D

WoolyS14DET

06-12-2008, 06:43 PM

Tell you dealer to call nissan motorsports or PM me and i can get it for you !!

socal_kouki

06-12-2008, 06:49 PM

Actually Roman has been waiting for the JDM lip for over a year. And he works for Nissan parts.

You're better off finding it used, cookie.

WoolyS14DET

06-12-2008, 06:54 PM

Actually Roman has been waiting for the JDM lip for over a year. And he works for Nissan parts.

You're better off finding it used, cookie.

Yes he has been waiting for it and he works for infiniti parts BTW. But I just sent an email to my hook at nissan motorsports. I know that Motorsports is waiting on a bunch of stuff for a whole lot of peeps !!