300whp plausible with this setup?

[allblackS14]

Will this setup yield a little over 300whp? Maybe something like 315whp 307 ft. lbs- tq?

Car: 1995 S14 Zenki blue emerald


S15 SR:
5-speed S13 black-top tranny
Stock head
Stock block
Speedaction Type B Short-shifter
Seido Rocker Arm Stoppers
Cometic Head Gasket
ARP Head Studs
GT Spec Hyrbid Intercooler (www.hiprollc.com)
LS Auto Turbo elbow
Project Silvia Downpipe and Test Pipe
GP Sports Spec R exhaust
HKS SSQ Bov
Apex S-Afc
Apex Rev/Speed Meter
*Apex AVC-R
Greddy Turbo Timer
Walbro fuel Pump 255 lph
Koyo Radiator
Exedy Chromoly Lightened Flywheel
Custom clutch good to 360 ft.-lbs tq
*Underground motorsports adj. fuel pressure regulator

Suspension:
Megan racing Coilovers
SPL Parts Tension Rods
SPL Parts Toe Arms
SPL Parts Traction Rods
Cusco Upper Control Arms
Suspension Technique F & R Sway Bars
Ebay Strut tower bar (it was free, lol)
Tein inner Tie-rods with KTS outer tie-rod end
SPL Parts Subframe eliminators

Brakes:
Front - Z32 30mm Calipers with Brembo Slotted Rotors
Rear - Stock 240sx 1-pot calipers w/ Brembo Slotted Rotors
Ultimate Ceramic brake pads (all courtesy of Powertrix, INC.)

Wheels: Stock S14 16" SE Alloys (how wide and or large do I need to go to avoid having traction issues?)

*currently waiting on a few of the listed parts to come in (If anyone can help me with those email [email protected] or PM me), but going to assemble in the next month or so. Is there anything I'm missing? I'm thinking about rocking the stock clutch fan and just finding a way to mount the shroud. Feedback would be greatly appreciated! :)

[HyperTek]

maybe have of that list is all u need..

[North240]

I think every has a list like that when they first start then we realize we arent made of money. Good luck.

[SilviaDriver]

so when did suspension/brake and wheel setups actually produce power?

[TheTimanator]

most of that crap on your list is irrelevant.

Anyway, since you have a S15 SR all you need is a fmic, fuel pump, boost controller and some kind of control. Then get it tuned. Assuming the S15 maf can handle it (cause I don't know anything about it)

fixed your list
S15 SR:
Intercooler
Turbo elbow
Downpipe and Test Pipe
exhaust
Apex S-Afc
*Apex AVC-R
fuel Pump 255 lph
clutch that can handle the power

Good luck

[TheSnail]

I have an s15 sr and I dont know anything about the maf either. Its the one thing I could not find info on. Does any one know how much hp it can handle before it maxes out? I would not think nissan would give it a maf that would max out after 30 more ponny's

[Sil Beer S13]

what does 300whp have to do with your suspension or brakes??

You asking a engine question.

Stop trying to brag about your non existant car.

[allblackS14]

what does 300whp have to do with your suspension or brakes??

You asking a engine question.

Stop trying to brag about your non existant car.


I'm not bragging about a nonexistant car, but I figured if I didn't show that I can support the stopping power then someone would have added [hey you're going to need suspension] calm down man. As for the comment on we all have a list like this but then realize we're not made of money, the parts with an * are what I'm waiting for in the mail. Was curious about the Maf myself because not much is spoken about it on the various threads.

[DoriftoSlut]

* means in mail
does the rest mean you odnt have it?
get larger injectors (even though s15 is ok, i would upgrade)
get some fuel management beyond safc (romtune)
scratch the head studs
definately dump the useless Apex'i REV/Speed meter waste of money
definately keep the stock clutch fan and shroud!

yeah should make about 300rwhp.
s15 motor is good for it easy.


and i'd get some gauges,j ust for safey, boost, oil pressure, oil temp, water temp

good to have just in case and to know what your motor is doing/going to do haha...

[Sil Beer S13]

^ listen to him.

[allblackS14]

No everything not asteriked is either in my possession or on the car. Just seeing if I'm in the right ballpark for the #s, thanks all.

[evilimport]

so when did suspension/brake and wheel setups actually produce power?
They dont, but the point is they help in using all the available power, whereas getting more power to the ground.... And if he didnt list all the suspension goodies everybody would complain he's making some kind of drag car and bitch anyway. :rolleyes:

You should have NO problem hitting your HP numbers, I'd say you'll prolly easily exceed them.

[Nan Desu Ka?!]

*sniff sniff* do i smell.... jealousy?

can't wait to see the finished product man, sounds like its going to be a monster. when ur done (or even in the process) take some pics/movies. also dyno sheets are what we crave around here. good luck man!

[Gjohnson7]

Hmmmmmm........300hp, that depends. 15%, 20% or Limo tint?????? :p

[allblackS14]

Thanks guys, will do look for the follow up on this in late August - early September!


*If someone knows the bolt sizes for an S13 SR tranny and the flywheel sizes for the S15 SR PM me or email me the specs [email protected]

[s13SRtwentyDET]

post before and after pics

[Inland180]

that hp should be pretty easy to accomplish with minor upgrades

[JOnJ0n]

The dude is a fake, should read some of his prior posts... I had one up but the moderators took it down...

[sepulchral]

this guy is a complete and utter moron...

[infinitexsound]

^ geat quote......... PLATO and SOCRATES are jealous now...........

[420sx]

you need to bleach your hair and race for slips in your car with 3 bottles of nos in the front seats..... you can be just like PAul Walker.