redrilling z32 rotors to 4 lug

[IAM_SO_sLOw]

i was wondering if anyone knows a shop from experiance that does good work and knows how to redrill z32 rotors to 4 lug from by doing it before... i know theres a million machine shops but i wanna take it to a shop that has done it to z32 rotors... im looking for a shop in the 626 area...
-thanks (plz dont flame) =)

[SilviaDriver]

a rotor is a rotor. what does it matter if its a Z32 rotor?

[A Spec Products]

i think he just doesn't want some shop to mess it up, so a shop that someone had experience with might help him not go to some slim shadyness.

just buy cheap blanks solo

[broken_s13]

a rotor is a rotor. what does it matter if its a Z32 rotor?
Are you seriouse?? Mabey he is going z32 upgrades and needs his rotors redrilled. :tweak:

[HyperTek]

its easy man.. i did mine myself and it was my first time using a drill press, just had a friend that had one. Just gotta mark the holes correctly.

[sw20>>s14]

drilling it is not the thing...its marking it..you mark it yourself, make sure everythings square, and correct...then you bring it in some shop and they can do the easy part...the most i would let a shop do is the actually drilling...

[IAM_SO_sLOw]

ya im going z32 brakes... i have brembo blanks...i was just wondering if anyone knew any shops that have experience with redrilling z32 rotors to 4 lug

[SilviaDriver]

Are you seriouse?? Mabey he is going z32 upgrades and needs his rotors redrilled. :tweak:

do you think i dont know hez going z32 and needs a z32 rotor?

i was saying a z32 rotor is the same as any other rotor when drilling.

so he wouldnt take it to a ship that redrill 100 rotors because they werent z32 rotors.

[infinitexsound]

flip 4 lug rotor over center spray red paint...... ........ done

[XxJaPxOxNeEs23xX]

Are you seriouse?? Mabey he is going z32 upgrades and needs his rotors redrilled. :tweak:

wtf are u saying. why else would he want the rotors drilled

[statik]

its funny reading this, people are getting very confused...let me clarify, SilviaDriver was trying to tell the poster to take the rotors to ANY machine shop, a rotor is a rotor, Z32 rotors won't drill any differently than a normal rotor, i did my 4 lug rotors to 5 lug in my garage but i wouldnt suggest it if you don't know what youre doing... thread over

[IAM_SO_sLOw]

lol ya i know a rotor is a rotor... i was just wondering if anyone can recommend a good shop that is in the 626 area

[infinitexsound]

find a homie with a drill press use oil and right size drill bit and drill slowly.... u use oil for a better clean cut....