think they fit??

[Campos]

I want to get 18x9 and 18x10 for s13 hatch, opinions on fitment...????

[mr_240sx]

i ordered a set of Works from josh at Auto R&D. i had ordered 18x8 and 18x9. Works ended up making 18x9 and 18x10. And Josh from Auto R&D told me they would fit my 240sx! so i hope he's correct cause i sure wouldnt mind the free upgrade in width!

[SilviaDriver]

offsets would help

[mr_240sx]

i had ordered 18x8 +25 and 18x9 +25......but not sure what works sent me. For some reason, i beleive josh said they were +20 :goyou:

[Campos]

18x9 +12 18x10 +30, any recomended tire sizes??

[240silvia]

ok, do this. Take off the front fender, and you'll be good. lol. j/k.DEF gonna need to roll those fenders, either that or run some crazy camber!

[Campos]

how about 235-40 f and 265-35 r ???

[spools14]

how about 235-40 f and 265-35 r ???

225/40 front 245/40 rear... and that's pushing it.

[Pudula]

I have 17x10 +25 on th rear of my s14 with about 4 degrees of negative camber. I can't even fit a finger between the tire and the fender and I'm running 255/40 on there. My fenders are un-altered however.

[nlzmo400r]

i know u guys have coilovers,just raise the damn car some.

[Pudula]

i know u guys have coilovers,just raise the damn car some.
In most cases where fitment is an issue, raising the car would make the fitment even a bigger issue. Getting the tires tucked under the fender lip by lowering the car is when it clears in some cases, like mine.

[Campos]

which brings me to my next point i have eibach pro kit, had tein he's but sold them, gettin flex's down the road....

[Sil Beer S13]

18x9 +12 18x10 +30, any recomended tire sizes??

225 or 215 front 255 or 245 rear

[chmercer]

I have 17x10 +25 on th rear of my s14 with about 4 degrees of negative camber. I can't even fit a finger between the tire and the fender and I'm running 255/40 on there. My fenders are un-altered however.

what the HELL. dude roll and pull your fenders. i had the same thing on the back of my car with a 255 and had like a half inch of sunkenness.

[mr_240sx]

alright guys, heres the deal.

i got works seeker CX in 18x9 +20 and 18x10 +25. im planning on running 225/40/18 and 245/35/18 in the rear. Will i need to pull my fenders? or will rolling the inner lip work?

If you guys need this, i got GP Sports GR-6 coil-overs.

[ayes]

why dont you mount them and see what has to be done to make them fit

[Yuri]

18x9 +12 18x10 +30

Front is perfect, rear needs a 15mm spacer, run 30mm wide fenders, and you'll be set.