Kouki 180 Position(running) light question

[iwishiwas-all*]

HI all I Have a set of these for my m-sports body kit. The guy who sold them to me threw em in with my kit for free, my problem is it didnt come with the bulbs or socket for the bulbs. What bulbs fit into the kouki position lights and what will i need to wire them up to the harness that went to my old position lights?

Thanks a bunch!
laters

[radhaz]

This thread (http://www.zilvia.net/f/showthread.php?t=55087&highlight=position+light) might be useful to you for wiring them up. From the pics in that thread the sockets for the bulbs look one off. Did you get the sockets without the lightbulbs, or no socket & bulb at all? If you didn't get anything at all I recommend you go to the junkyard and get yourself a few light sockets that are of similar size and shape to the hole and then mod/dremel the light to fit.

As for wiring in the parking light itself on your old 3 wire harness the black is ground, the center wire is for the blinker, and the 3rd wire is the hot lead for your parking light. Get yourself a cheap multimeter and set it to read 20v DC and you will be able to figure this out for yourself.

Good luck!

[iwishiwas-all*]

that deffinately helps a bit thanks, yea unfortunately my lights did not come with the socket or bulbs, but that page has informed me the the s14 sidemarkers are the same and i can just get them off there at the junkyard or something

Thanks for the thread though