PDA

View Full Version : Definitive Answer: Z32 Rear E-Brake Cable on S13??

chnco
07-10-2005, 05:09 PM
I have heard mixed answers regarding this. I have a S13 with Z32 Twin Turbo Front and Rear brakes.

Basically, I have heard that you have to use both the S13 and Z32 e-brake cable and splicfe the two to get it to work.

On the other hand, I've heard that you can actually use the stock S13 e-brake cable and it bolts right up.

The article on Importnut says to splice, so who is positive on this!?!?! I know the splicing method will work, but will a stock cable work as well??
projectRDM
07-10-2005, 05:17 PM
Ever thought about actually trying it and seeing for yourself? Makes a lot more sense than crying about it on here, especially when it's been ebaten to death for years.

Remember, hearsay is just that. Don't believe everything you hear.
matt0481
07-10-2005, 05:36 PM
You can use the cable without splicing on the S13. I just finished doing it. You will have make a bracket to hold the Z32 cables using the original mount location.
chnco
07-10-2005, 08:05 PM
You can use the cable without splicing on the S13. I just finished doing it. You will have make a bracket to hold the Z32 cables using the original mount location.

So you have to use a stock Z32 cable and not the stock S13 cable, correct?
chnco
07-10-2005, 08:09 PM
Ever thought about actually trying it and seeing for yourself? Makes a lot more sense than crying about it on here, especially when it's been ebaten to death for years.

Remember, hearsay is just that. Don't believe everything you hear.

Why don't you spend more time on making a more worthwhile post than bitching to me? Proper response should have been "search", but obviously you didn't think that much. :jerkit:

Why would I waste my time trying something that maybe wrong, when I can just ask? Oh, you must be one of those "trial and error" type of people that spends countless weeks, months, and years doing stuff wrong, but I must give you credit, at least you tried. :rolleyes:
projectRDM
07-10-2005, 09:50 PM
Nope, common sense and 10 seconds of comparing them side by side told me everything I needed to know. Same way I know R33 cables for the S14.

Your searching skills aren't the problem, it's your laziness.
Flybert
07-10-2005, 10:27 PM
Word. I just took a look under my s13 and took a look at my z32 cables. I was like, "hey, if i make a bracket for this shit, it'll work." Took me all of 10 minutes to figure it out.
scir16v
07-11-2005, 02:30 AM
I didn't have to make a bracket, I just swapped the brackets from the 240 lines.