***VLSD, 5-lug hubcentric wheels, free misc stuff in SOCAL (san diego) CLEARANCE***

[zads]

R200 VLSD differential - $160 obo
http://iacs5.ucsd.edu/~clwang/sell/vlsd-1.jpg
http://iacs5.ucsd.edu/~clwang/sell/vlsd-2.jpg

Engine Hoist $80 For engine swaps, transmission swaps, etc etc etc..

KA24DE Engine $100, torn down but complete, except for some gaskets. Tore it down to check condition/tolerances/clearances, everything checked out.

PAIR of 16x7.5" +35 offset German ACT wheels - $125 obo
Hubcentric. A little bit of curb rash, nothing too bad. Straight- no chunks or dents.
Could use a sanding/spray paint clear coat. Tires have a little life left in them.
http://iacs5.ucsd.edu/~clwang/sell/16-1.jpg
http://iacs5.ucsd.edu/~clwang/sell/16-2.jpg

3 (Three) 15x7" +23 offset BBS wheels - $175 obo
Hubcentric. Very minor curbage, tires are at wear markers..
One has a VERY slight pothole dent in the rim (see second picture), it still holds air and everything perfectly. The same wheel is shown in the first picture- its unnoticable except pretty close up.
Other two have nothing on them.
Sorry for the weird color in the pictures, musta hit a funny button on camera.
Same silver color as wheels above.
http://iacs5.ucsd.edu/~clwang/sell/15-1.jpg
http://iacs5.ucsd.edu/~clwang/sell/15-2.jpg


300zx NA aluminum uprights (both), rotors, 1 e-brake assembly- $60 obo

Auto driveshaft (maybe you can use center bearing on 5 spd if yours wobbles/vibrates)- $free/beer?

KA24DE Upper Exhaust Manifold with EGR pipe/actuator - $20 obo


3 (Three) 16x7.5" +0 offset Gold BMW 5-lug mesh wheels + good tires $150 obo. TIRES ALONE don't come this cheap..
, (fourth in picture is just tire only, no rim)
Only fits BMWs. Great condition, 2" lip. With tires (lots of meat)-
http://iacs5.ucsd.edu/~clwang/sell/bmw-1.jpg
http://iacs5.ucsd.edu/~clwang/sell/bmw-2.jpg
http://iacs5.ucsd.edu/~clwang/sell/bmw-3.jpg

Looking for:
-17"+ 5-lug wheels :hug: ,
-Front 5-lug stuff :hug: ,
-S13 Suspension stuff,
-S13 Aftermarket Cat-back.

Parts located in 92122 San Diego, local pickup preferred or you pay shipping.[/QUOTE]

[NSDCA]

i got some 17 inch volks for sale. check out the link.

http://www.zilvia.net/f/showthread.php?t=82747

[sticky240]

you don' thave the axels for the VLSD?

[speed_vision]

pm sent about vlsd.

[Kreukishot]

have any pictures of these?
300zx NA aluminum uprights (both), rotors, 1 e-brake assembly- $60 obo


Thanks,
Chris
[email protected]

[EricPE]

the bmw rims, what size are the tires?

[Creature546]

well that LSD work with a 96 240sx SE? what other parts would i need if any?

Seth

[dimsumsil80]

What kind of exhaust are u selling? N what kind of suspension parts are u selling?

[zads]

Aluminum uprights:no pictures, sorry. if you search on the forums, you can find some pictures, i'm sure.

BMW tires are 225/50R16 size.

LSD Doesn't need any extra parts for the 240sx, stock output shafts will fit.

NSDCA Are you looking to trade the wheels?

[s14dr1ft3r]

bump for the great deals. sell vlsd to speed_vision. good guy.

[zads]

Thanks for the bump, S14
LSD is sold to speed_vision! enjoy!

[sc ka24e]

what year is the DE got the harness? ecu, what condition, miles, pics , very interested , what is it missing , running? im located in san diego as well .. LMK

[zads]

The KA24DE is from a 91, yes I have the complete uncut harness, no pics. Only missing some gaskets, which should be changed anyway. I took it apart to check tolerances/clearances, so no its not running.

[KA24DESOneThree]

If sc doesn't want the DE, I'll take it off your hands.

Now that I've got a nicely equipped shop to do work in, I've been looking for a motor to rebuild and upgrade.

I'm in San Diego every week and only live about an hour's drive away.

Oh, and I'm interested in the Z32 aluminum uprights as well.

[Kreukishot]

you've got email

[sc ka24e]

definitley intrested , do u have the ecu and MAF as well? is anything missing for install? lmk emal me at [email protected] asap