350z seats in s14

[grudge]

has anyone put 350z seats in their s14? if so any comments? :rawk:

[justinhustle]

3/4 bolts line up

i sold a few sets last summer

its a decent option for a budget

[raen419]

3 of the 4 bolts line up? hm....
i could make custom brackets to fit the other bolt to the existing hole....

if only i wasn't moving off for school, and not having to save every dime lately....

[grudge]

could i still use my own bracket or would i have to use the 350z bracket? :rawk:

[raen419]

use 350z bracket.
mod the bracket end where the bolt that doesn't line up.
should be too hard really.

if anything, have a machine shop cut/weld for you.

[TurDz]

Can anyone compare 350Z seats to other models such as Bride, Sparco, OEM Skyline, etc?

I've sat in 350Z seats and they are too big (wide) for me. heheh...

[grudge]

if i can't use the 350z brakets, do i have any other options? i don't think my boy will let me use his cause he's still using his stock bracket for his new seats. does this mean im screwed then? that suks. :mad:

[trackstar]

if i can't use the 350z brakets, do i have any other options? i don't think my boy will let me use his cause he's still using his stock bracket for his new seats. does this mean im screwed then? that suks. :mad:

Just buy some brackets from the dealer.

Anyone know how the seats fit (headroom, width) in an S13?

[DRFT180]

^^I have the same question, has anyone ever put them in an S13?

[frozencoconutz]

3/4 bolts line up

i sold a few sets last summer

its a decent option for a budget

are we just takling about the drivers side? or also the passenger side?

[drnovascotia]

Umm, if the s13 and the s14 have the EXACT SAME MOUNTS, why would you be asking this question ? If you can bolt a s14 seat into a s13, don't you think then that 3 of the 4 would line up on the s13?

Dr.

[DRFT180]

An S14 seat in an S13, actually only 3 of the 4 bolts line up from on the driver side. The passenger side bolts right in. The front left bolt does not line up with the S14 seat.

[Dousan_PG]

An S14 seat in an S13, actually only 3 of the 4 bolts line up from on the driver side. The passenger side bolts right in. The front left bolt does not line up with the S14 seat.


you proved
1) either your a moron
2) your car is a POS

s14 fits in s13 PERFECT
ive done it soo many times on friends cars and 2 of my cars (2 s13s)
and s15 fits perfect too

sooooooo many folks i know have s14 seats i ntheir car and it fits PERFECT

your car is f'd up.

[drew935]

you proved
1) either your a moron
2) your car is a POS

s14 fits in s13 PERFECT
ive done it soo many times on friends cars and 2 of my cars (2 s13s)
and s15 fits perfect too

sooooooo many folks i know have s14 seats i ntheir car and it fits PERFECT

your car is f'd up.
+1

The message you have entered is too short. Please lengthen your message to at least 10 characters.

[frozencoconutz]

Umm, if the s13 and the s14 have the EXACT SAME MOUNTS, why would you be asking this question ? If you can bolt a s14 seat into a s13, don't you think then that 3 of the 4 would line up on the s13?

Dr.

why did i ask that question? simply because I DONT KNOW. but thanks for the input. now let me ask you this....do you always end your posts with Dr?....

frozen....

[raen419]

i have s14 seat in my hatch, they line up fine.
and it's my 2nd pair of seats....so i don't see the issue....
all 4 bolts are bolted in too....imagine that....

[Drunk Bastard]

so 350z seats in a s14 is cool...but what about 350z motor??? :rawk: :rawk:

[reefer1114]

wasnt it motorex that swapped a sr20det in a z33 for their drift car?

[Dousan_PG]

more like chris forsberg did then signal copied it.
chris drove for motorex for a while too
chris still drives the car
HE built it, HE drives it. not some company car. his personal car. and a sr was swapped in because the supercharger blew up the motor.