Changing gear oil..please help me out

[TAMTANIUM]

i want to change gear oil for my s13...how do i take off the bolt? please help me out. thanks

[Indolent]

breaker bar/impact gun

[infinitexsound]

u mean the drain plug.... use a ratchet..

[s0ldats]

1/2 inch driver. like they said, breaker bar. i'd remove the fill plug first.

[fliprayzin240sx]

If its stuck....PB blaster is your new best friend.

If the plug is rounded off.....HAVE FUN BUDDDDDY!!! :down:

[420sx]

^^^ nothing hard about that one. :smash:


IF U FUCK UP YOUR DRAIN PLUG.

1)remove the drive shaft.
2) jack up the front of the car a good amount.
3) wait to drain.
4) put the driveshaft back in.
5) undo your shifter, fill the tranny with gear oil

Fucking A! who gives a shit about rounded off drain plug.

[infinitexsound]

and the survey says, READ YOUR FACTORY SERVICE MANUAL!!!!!(FSM) ohh yeah never ever use a impact gun on a drain plug......

[johngriff]

FILL THROUGH THE SHIFTER< OMG ITS EASIER!!!! PUT 2.5 quarts in TOO, its over factory spec, but if you're some asshole wannabe drifter you'll need it!!!

LOL

[sdtouge]

lol

if you ronded that bolt you can weld a tool right to it and take it off that way if you can weld. if not take it to a shop and weld it.

use a 1/2 inch drive to loosten the drain hole, but like stated earleir undo fill plug first to make shure.

[infinitexsound]

yeah weld a 1/2" extension like a really really small one... but just get a new one.. its like 8 bucks...