sr20det wiring harness, front covers with oil pump, newer water pump, othe engine par

[steve shadows]

I have all kinds of misc sr20det parts if anyone needs anything.

I have a stripped short block for 80 bucks picked up , sr20det. Has crank and clean cylinder walls, ready for rebuild.

I have cams, front covers, a water pump, intake manifolds, throttle bodies, everything is cheaper if you can pick it up and ILL GIVE YOU A RIDE IN MY crazy BIG TURBO SR, LOL....

anyways, Also have an sr20det wiring harness complete, its cut at the maf plug would be and the battery area plugs. 150 plus shipping?

send me your offers via email if you can.

[email protected]

or if you can't rember that you can send me a pm.

-steve kochan (fmr rpsport).

[steve shadows]

EMAIL ME FOR PICS

[email protected]

[steve shadows]

http://i8.photobucket.com/albums/a6/RPSport/100_4429.jpg

http://i8.photobucket.com/albums/a6/RPSport/100_4425.jpg

http://i8.photobucket.com/albums/a6/RPSport/100_4424.jpg

http://i8.photobucket.com/albums/a6/RPSport/100_4423.jpg

http://i8.photobucket.com/albums/a6/RPSport/100_4422.jpg

[Jcb890]

the wiring harness is a little high considering you can have them done for like $100. not flaming your thread, just suggesting. free up and good luck selling.

hell, if you come down low enough, i'll buy it from you so i can have it ready for when my sr comes in ;)

[steve shadows]

you can have them "done"?

You mean you can now buy a plug and play sr20det harness for the Nissan240sx already re-wired to plug in and run the car for 100 dollars total?

Sorry I was not aware please link me.

I believe most people sell used sr20det harnesses for around 200-350dollars US. The service is betwee 75 dollars for shitty work and 150-200 for perfect setup.right? Or in one year has everything dropped 300%. I mean what about inflation. :duh:

Get back to me on this I am really curious. :ughug:

:hs:


PS. Most harnesses on swap kits and clips are cut in several places, you have to replace the stock jdm chasis plugs typically with ka24 engine plugs so it plugs in to the USDM battery area harness. The maf sensor must be lengthened to reach the proper location of the air intake pipe to the turbo. Many people opt to use their stock ka24e maf sensor. I have been doing this for a while I am pretty sure I am not too far off base.

Now I just need to stop by my house long enough to take some pictures

[Jcb890]

http://www.wiringspecialties.com/s13sr20det.html - they do a lot of wiring and great work, Heavy Throttle sends all their customers to them and they charge $100. you give them both harnesses and everything is spliced together and done up nicely.

[rim_bender]

thats 100 dollars for the wiring work, not for the harness. That 100 dollars doesnt include the actual harnnes.

if you dont have a harness oyu have to buy one then send it to them and pay another 100 dollars.

[Jcb890]

this is true. i just figured most people would have the harness in the first place. anyways, free up for you and if you'll come down on price PM me and we can talk :)

[mixedwell]

do you haved any sr20det ecu's for sale? where in socal are you?

-;)

[steve shadows]

I am not selling a service I am selling a harness.

I mean i can do the service for a bill for someone but thats not what I was posting. sorry

I will be posting pics around 5-6pm pacific

I am located in Long Beach CA near the 605/405 interchange.

thanks :blah:

[steve shadows]

http://i8.photobucket.com/albums/a6/RPSport/harness/100_4471.jpg

maf sensor cut.

http://i8.photobucket.com/albums/a6/RPSport/harness/100_4469.jpg

Darsh wirining harness plug cut off

http://i8.photobucket.com/albums/a6/RPSport/100_4466.jpg

overall of harness.

[steve shadows]

http://i8.photobucket.com/albums/a6/RPSport/harness/100_4487.jpg

http://i8.photobucket.com/albums/a6/RPSport/harness/100_4486.jpg

[steve shadows]

dropin prices no problema