View Full Version : WTB: (whiteline anti-) sway bars f and r.
Anyone willing to let go of some?
I say we get a GB going! 220 shipped! <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'>
Anyone have any connections they'd like to tug on to get a GB going? is there interest?
tnord
04-09-2002, 09:07 AM
wait 1.5 months and i'll be in on it. i can't buy them now cause i'm in school and don't have a job. but come this summer i'll be game.
drift freaq
04-10-2002, 12:21 AM
you can already get them in the States at that price from Rennick Suburu in Fullerton Ca you just have to have the part numbers which you can get from Whitelines site.
ask for Brett he will hook you up 714-680-0222
fridexter
04-10-2002, 02:18 AM
</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (drift freaq @ April 10 2002,01:21)</td></tr><tr><td id="QUOTE">you can already get them in the States at that price from Rennick Suburu in Fullerton Ca you just have to have the part numbers which you can get from Whitelines site.
ask for Brett he will hook you up 714-680-0222</td></tr></table><span id='postcolor'>
Happen to have the parts number with you for an s13?
Thanks!
hurleyboi514
04-10-2002, 06:42 AM
isnt there a site where u can get them now? they arent that expensive? pdm racing i think its called... Whiteline Bars from PDM (http://www.pdm-racing.com/products/suspensionbars.html) well, there they are, but they are 280 + shipping. 220 shipped would be one heck of a deal, im intrested, but keep it in the summer, ill have some cash by then! <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'>
240meowth
04-10-2002, 01:24 PM
</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (fridexter @ April 10 2002,01:18)</td></tr><tr><td id="QUOTE"></span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (drift freaq @ April 10 2002,01:21)</td></tr><tr><td id="QUOTE">you can already get them in the States at that price from Rennick Suburu in Fullerton Ca you just have to have the part numbers which you can get from Whitelines site.
ask for Brett he will hook you up 714-680-0222</td></tr></table><span id='postcolor'>
Happen to have the parts number with you for an s13?
Thanks!</td></tr></table><span id='postcolor'>
yah, i called, he asked for part #, i don't have a clue...
drift freaq
04-10-2002, 09:14 PM
here are the part numbers for the swaybars guys
BNR20z rear bar BNF21Z front bar
give him these numbers
I looked up these numbers at whiteline, and they're good-- one thing that I'm curious about though is that whiteline says they're adjustable 18-22mm for rears and adjustable 26-31mm front. what adjusts, and what do these measurements refer to?
What is the diameter of these sway bars? 18-22mm seems a little narrow for a non-stock sway bar, so what's the deal?
Also, what tools are needed to install these babies?
wait wait one more thing: who might we say referred us to Brett?
drift freaq
04-12-2002, 01:35 AM
</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">adey...I looked up these numbers at whiteline, and they're good-- one thing that I'm curious about though is that whiteline says they're adjustable 18-22mm for rears and adjustable 26-31mm front. what adjusts, and what do these measurements refer to?
What is the diameter of these sway bars? 18-22mm seems a little narrow for a non-stock sway bar, so what's the deal?
</td></tr></table><span id='postcolor'>
ok first off the fronts are 27mm in thichness with adjustable blade end links
the rears are 20mm (stock are like 16mm) with adjustable blade end links.
these are the best adjustable bars going for the money and put ST bars to shame IMHO
you have to be careful because they list the engine size right next to the swaybar size because they offer different swaybar diameters depending on if your car came with the CA18det , SRdet Or KA.
The SR20 and KA cars use the same bars the CA cars used smaller bars.
If you talk to Brett and use part numbers you can tell him Dave told you to call . If you just call him up and say I want whiteline swaybars for my 240sx don't bother mentioning my name. I am trying to help you guys . Brett is a Suburu man he does not know the parts numbers off the top of his head its up to us to approach him intelligently and know what we are asking for when we talk to him. If you do this he will respect you and be able to help you get a good deal. The other thing to remember is to be armed with other prices so he can beat them. He orders 6 containers of Whiteline products every two weeks . He probably brings in more Whiteline product than anyone else in the country.
good luck , Dave
Excellent info, thanks a lot Dave! I hope to give Brett a call hopefully within the next few weeks (unless money suddenly shows up).
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.