JKim0901
06-16-2005, 12:37 AM
I have a used NISMO twin plate clutch that came with my front clip. after about 10k miles the motor was installed the clutch was slipping so i changed it for an ACT. this is the whole setup with flywheel
I took it apart and the Twin plate needs a rebuild badly. both clutch discs are worn down to the metal and the center disc needs machining along with the pressure plate. this is only for those who know of a place that could supply nismo parts, i opted for the ACT because i dont need a twin plate, its a stock sr20.
parts on the clutch have excedy written on it so maybe excedy parts will work with it.
no use for it, pretty damn shot so i threw it up on ebay
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=7980600324&sspagename=STRK%3AMESE%3AIT
http://i2.photobucket.com/albums/y2/JKim0901/twinplate1.jpg
could make offers to [email protected] or throw your offer on ebay thanks
I took it apart and the Twin plate needs a rebuild badly. both clutch discs are worn down to the metal and the center disc needs machining along with the pressure plate. this is only for those who know of a place that could supply nismo parts, i opted for the ACT because i dont need a twin plate, its a stock sr20.
parts on the clutch have excedy written on it so maybe excedy parts will work with it.
no use for it, pretty damn shot so i threw it up on ebay
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=7980600324&sspagename=STRK%3AMESE%3AIT
http://i2.photobucket.com/albums/y2/JKim0901/twinplate1.jpg
could make offers to [email protected] or throw your offer on ebay thanks