skyline calipers

[DrftSld]

i recently bought some skyline front calipers for my s14 but they said they weren't sure if they were from r32 or r33 and i was wondering if anyone knows which rotors i could use? 300z 30mm??????

[TheSnail]

Depends. If they are r32 then it is 300zx N/a. If its from a r32 type M, then its 300zx TT Iron calipers. If its r33 gtst then its 300zx tt alum or iron calipers. Check the part # on the caliper. It should be the same as one varient of the z32 300zx

[DrftSld]

where can i find a reference to which car the part number belongs to

[TheSnail]

type the number in google. Call nissan, tell them to look up the part# for you.

[badboy6686]

http://importnut.net/300zxbrakeswap.htm

[HyperTek]

they all use the same 300zx brake pads..

[R33GTS-T]

actually....i know for sure that the R33 calipers (GTS-T) are 32m pistons and if you were to use Z32 rotors you're not going to fully sweep the pad surface......i am not completely sure about the R32 calipers though

i'm running ECR33 calipers front and rear....the front rotors are 1/2 inch larger in diameter than the Z32 rotors (my ECR33 Endless rotors wouldn't allow Z32TT 30mm front calipers to bolt onto the chassis) while the rear calipers are the exact same as the Z32 and use the same rotors

Late,
Daniel

[[email protected]]

If they were from an R32 GTR then they use a 295mm x 32mm rotor...

The Z32 it 280mm x 30mm if I remember off the top of my head correctly...

R32 GTR Rotors (http://www.performancenissanparts.com/catalog/advanced_search_result.php?keywords=gtr+rotor&Submit=Search)