OEM Sideskirt mounting

[JaeTea]

I got a set of used OEM sideskirts from someone for an S13.

If anyone has installed these whats the best way to mount them, since mine didn't come with any hardware. :hammer:

[Wei240]

i have a oem sideskirt on s13,
let's see if i can recall (don't blame me if it's wrong, been a while.. :) )

buy double adhesive tape from home depot, or other double sided tape that peeps use to mount body kits and line up where it's going to contact the body - pretty self explanatory/easy

as far as the front and rear screws go, it goes into the mudguard holes are (i had mudguards, so it's easy), but you kinda had to fab your own mounting, pretty easy, go to home depot for any parts you need, pretty much some metal tabs/washers/screws, the tabs i used are kinda like the ones you hang pictures on, but the heavy duty type, so it would be on that aisle in home depot
not sure if that helped...

summary = pretty easy, parts you need will be in home depot

[ZK]

From my experience the skirts mount to the car:

front: uses the stock fender liner screws to hold on
top: double side tape for the top edges, there are brackets that attach under the door sills, probably can substitute with double sided tape.
back: OEM has special brackets and screws that go into it to mount to the back edge of the fender
bottom: a bunch of little clamp things that attach it to the ridge underneath the car

[Ian]

if those dont work, you can always just do this


drill front through sideskirt and fender, about 1" from the top.
then drill again about 2-3" down from there
insert self tapping screw in both holes w/ said drill

do the same for the rear

and then do it again maybe 2 times on the door sill


done

[IAM_SO_sLOw]

use double sided tape and the top part mounts under the door thingy... and that should hold it..thats how im running mines...

[JaeTea]

Yeah so I'm debating whether to drill 4 holes into the door sill to mount it. Is that necessary?

I think I have most of the pieces I need but I still have no clue how to mount the rear of the sideskirt to the car since its like 4 inches away from the wheel well. :Ownedd:

[kingsol]

just use double side for the sills... and 4 in. away? in any case, use double side and don't drill any holes.

[Ian]

then they're not really OEM


my friend got OEM S13 skirts and he didnt use ANY mounting hardware at all and they stayed on (i think they're still this way)

[papershot]

put some tape on the door sill then ziptie the ends on. done and done.