Parting out s13 coupe w/sr

[z0iid]

Car kissed the side of the mountain - don't have money to fix, so parting out car. Make offers on anything.

*1997 s13 Blacktop SR20DET - 12k miles in car, replaced turbo(with another stock one), gaskets, new valve cover gasket ready for YOU to put on, stock intercooler, new earls racing coolant line from block to turbo.
*TEIN type Flex coilovers w/EDFC (front wires are cut, but you could figure it out) 12k miles
*Cusco front and rear sway bars
*4 wheel 5-lug setup with 2 week old slotted brembo rotors and sumitomo brake pads in the front. (with stainless steel brake lines - installed in the front, never installed in the rear - but you can have them)
*5-lug s14 wheels with bald rubber (wheels painted flat black)
*turbo-back 3" exhaust - non racer look, fairly quiet with hi-flo cat and res. Downpipe is a greddy.
*Doors (w/Infinity 5.1 Kappa Perfect speakers if you want) Drivers side has no dents or dings - both are painted Titanium grey metallic. Passengerside door has a noticible ding. (Windows are tinted 35%)
*Trunk lid, painted same color.
*Rear Bumper, painted same color.
*Stock s13 seats (drivers side is pretty crappy)
*Rear seats (okay condition)
*Infinity 10" Kappa Perfect Sub in box with Alpine Vseries Amp (don't know the model number off hand - will update this later)
*Sun Visors
*Ebay shift boot
*Center console
*s13 VLSD
*Optima Yellow top battery. (1 year old, with wiring to trunk if you want)
*JDM s13 front fenders - mostly clean, will need some body work to fit properly - will sell CHEAP!! ($75 for the PAIR! or so)
*ANYTHING ELSE THAT ISN"T MENTIONED THAT YOU THINK YOU WANT OR NEED.

***NOTE - Front Bumper is screwed, Hood is screwed, side fenders (not ones mentioned above) are screwed and possibly the radiator is screwed.

Bay area buyers get first dibs, would prefer not to ship anything over 10 pounds or larger than standard size.

Car is in San Rafael. (CA)

[that180guy]

i could use your shift boot and beater seats for a good price and possible the relocation wiring for the battery :)
sucks that you ate it. everybody was sayin super under into wall....
i heard it was like, right after me and xander left tooo.

major boobooness man

[sdtouge]

does this car have power windows?
if so i am in need of this little circuit board.

[Andrew Bohan]

how much for the s14 wheels?

[skiboard06]

how much for the optima yellow top i need it for my relocation please let me know thanks

[mastaflash05]

if the front 5 lug conversion is aftermarket hubs i am interested.

how much for the coilovers and edfc

how much for the sr long block?

[dct223]

i have dibs on the optima!!! how much???

(im the asian dude driving the black s14 at shasta =D)

[L.D. 100]

would you sell just the ss brake lines?

[z0iid]

Mass reply: generally - MAKE OFFERS!! (price wise)

**that180guy**
shift boot, beater seats, relocation wiring - $100 seem fair? considering the wiring was that much...

**sdtouge**
yes it has power windows - come get the little circuit board $10 fair?

**i'm driftaholic**
s14 wheels - $300 for the set?

**skiboard06**
optima - cheapest price on ebay (with shipping) is like $130 - so $100? you pick up, $150 w/wiring

**mastaflash05**
not aftermarket hubs. coilovers w/edfc...$800 is my best offer so far. sr long block....I am thinking $2,000. (crank sensor cap and connector broke though)

**dct223**
optima - see above $100 or $150 w/wiring to rear

**L.D.100**
no I will not sell just the ss lines....I don't have the regular lines, so then the 5 lug conversion would be useless to whomever is interested, sorry

[mastaflash05]

hey i would like pictures of the coilover setup. please get into contact with me. email [email protected] , or aim mastaflashgt. if i like what i see i will beat the offer of 800. lmk.

[DJPimpFlex]

interested in a few random parts. Pm sent, and very local.

[eurosil80]

OHH no

that sucks...

how bad is the damage really?

I may be interested in motor....

[frozencoconutz]

do you got pics of the s13 fenders??? and how much are you willing the sell your door panels??? and if so got pics for those too?

[boostin50]

How Much for the VLSD? Email me a pic if possible add shipping to 60108

[WILDACEX187]

wat type of exhaust is that?

[chineseb0i]

jus want to post..he is need of so guys don't low ball him. he's a good guy and he speaks the truth bout all the parts. I believe there are some receipts for all these parts..i might be interested in the breaks. They are GENUINE BREMO with slots and those are 300zx 30mm brake calipers. Talk about major braking...so yea. if u guys can't get a hold of him, get a hold of me cuz i know what parts he has on. Aim: xoneyoungaznx

[007jpang]

i'll give you $35 for the rear bumper

john

[s14turbosilvia]

interested in the cusco sway bars. email me asap at [email protected]
willing to ship?

[WILDACEX187]

how much for the z32 brake set up?

[kriptix]

Just to clarify... he didn't eat it... I was driving... that shit hurt... hitting something going 20-30 mph and hitting a stationary object that doesn't move. Took some dirt with me... when I got out of the car it felt like someone took a baseball bat to my chest.

[mC_YoTo]

price on the blacktop?

[Toshiro]

ill tkae the lsd how far is san rafael from orange county...ill take for 180

[BOMEX180]

how about the seatbelts...

[z0iid]

mass reply (2)

I will have pics posted within the next day.

exhaust is a magnaflow without a ghetto shiny tip. other than the fact that it is 3", it has a stockish look to it - good way to keep cops from pulling you over just for exhaust.

Cusco sway bars - price brand new for the front was $250 (at a discount!) rear, $205.
$300 for the pair is pretty fair.

Price for the blacktop - see above post, $2,000.

OC to San Rafael - 4 hour drive if you don't get pulled over, probably at least a 5 hour drive. not gonna ship that. its probably like $50 to ship. $180 is probably fair.

seatbelts? sure...if you want them - $30?

[that180guy]

pm sent.

msg length

[citizen]

whats the amp?

[z0iid]

Amp is a V-Power Alpine amp...

Pic's should be up tue night.

I should have some stuff ready to get picked up wed... planning to pull out the seats, doors, diff w/ axles, driveshaft, exhaust (will be sold w/ downpipe because the clowns at the muffler shop cut the dp flange), trunk lid, rear + front sway bars, tail lights, and rear bumper.

By thurs, we should have the motor / tranny out. Will be sold as a motor set at first.. if no one wants it like that then I will part the motor. It will have plug and play wiring... all you have to do it drop it in and connect a few connectors (only if you have a 89-90. 91-94 you may have to change a couple of wires around)

Suspension is going to be the last to go... If someone has stock suspension I can have, that would be cool, if not then I will have to do a trade for the coilovers (money + stock for coilovers) Same goes for the 5 lug/brakes. I need to be able to get this car out of our shop w/out dragging it.

BTW: The brake master and booster are new 1" 300zx. Front 5lug/brake conversion is from a jdm s14. The rears are jdm s14 wheel hubs only (not s14/300z brakes)

Thanks

[s14turbosilvia]

get me some pics of the cusco sway bars asap to [email protected] and we can go from there.

-ben

[mastaflash05]

hey man i have the stock suspension, brakes and hubs from my car. i wish it would be easier to trade, but we would have to ship.

im interested in the front 5 lug conversion and the coilovers w/ edfc. lmk.

[RSP13-Sideways]

Zoooooooid, I just pm'd you, my name is TVRdvsdraggei2

Aye I'm down to the do the swap, I'm located in Fremont/Union city, so I'm only about 30minutes away...we can meet up tomorrow. I'll probably take the full 5-lug swap from you and trade you my 4-lug and swap out coilovers as well...let me know, we can do this!

my email is [email protected]

Email me and I'll give you phone numbers so we can contact eachother, I cannot seem to get ahold of you on AIM Tonight...lateeeeeee

[IAM_SO_sLOw]

would you just sell the front hubs?

[hmooblis]

http://www.zilvia.net/f/showthread.php?t=77061

[nismo_chk]

selling a turbo seperatly by chance??

[kriptix]

OK... Here is the deal... I forgot my camera at home so no pics tonight... probably tomorrow.

Here is the stuff that is ready to go:

Custom Turbo Back 3" Exhaust w/ Magnaflow Muffler and reflanged greddy DP - $300

Front and rear cusco sway bars - $100/ea (front may be a little bent will go lower)

JDM S13 VLSD w/5 Bolt Output Shafts and axles - $200

1" 300zx Brake Master - $160 Almost new (~2-3k Miles on it, and comes w/nipple for 240 conversion)

300zx Brake Booster - $150 Almost new (~2-3k Miles on it)

Thats it for now... I should have the motor, tranny, and coilovers out by tomorrow night. Rear bumper, lights, battery relocation wireing, and interior is probably gonna be out then too. I will take pics tomorrow of all the stuff as well, and post them up.

Sorry we haven't been able to respond to everybody's IM's, if you can please e-mail all requests/questions to [email protected] it will make it easier for me to respond. You can also aim me: xmishka

Thanks,
- Victor

Watch out for mountains... they don't move.... :duh:
PS - If anybody wants the front bumper it comes with free dirt/roots... and a few rocks.

[2forty]

I am interested in the motor. can i get some pics? [email protected]

[z0iid]

OK... Got More pics for you guys: http://parasite.n3.net/temp/deads13

The 5 Lug/300zx Brakes are sold... As well as the wheels.

Custom Turbo Back 3" Exhaust w/ Magnaflow Muffler and reflanged greddy DP - $300

Rear Cusco Sway Bar - $100

Front Cusco Sway Bar - $50 (Bent on one side where the endlink connects, and maybe a little somewhere in the center section)

JDM S13 VLSD w/5 Bolt Output Shafts and axles - $200

1" 300zx Brake Master - $160 Almost new (~2-3k Miles on it, and comes w/nipple for 240 conversion) - Shipped!

300zx Brake Booster - $150 Almost new (~2-3k Miles on it)

Sub + Amp + Wiring you see in the pic with the amp - $300

Front Doors (P/W, P/DL, P/M, Infinity 5.1 Kappa Perfect Components, tinted) - $300 for both (Don't Want to part doors out yet)

Seats - $30 Each

Rear bumper - $45

Rear Taillights - $30/ea

Clutch Slave w/hose - $60 (500 miles on it, new hose)

91-94 DOHC Exhaust Cam - $60 (I have 2 of these)

[richardxfeng]

how is the condition on the sun visors?

[Modern]

how is the dash and power steering lines. and how much

[kriptix]

New pics added to site: http://parasite.n3.net/temp/deads13

Look here for some pricing...
http://www.zilvia.net/f/showpost.php?p=730475&postcount=36

Thanks.

[z0iid]

also for sale, month of august (8) red temporary op permit. good condition. lol.

will pass visual inspection, will not pass close up examination.

may cause you to lose your car and a go to jail free card.

your cost = $25

[z0iid]

****bump*****

[[GoaTSLonG]]

i want the sway bars if you still have them, email me [email protected]

[bgindn]

Thanks man, Received the bar today in excellent shape. All zilvia sellers should be like this guy. quick, good communication, thanks again.

harp

[Rusted_PS13]

How much for the TEin coilovers/w EDFC? And do you have a SR20DET ECU?