kill switch wire

[IAM_SO_sLOw]

alright i have two questions.. i been searching for and didnt really find a answer to.... its about wiring up a kill switch to the fuel pump. first question is does anyone know what kinda wire (how thick) i have to get and what kinda switch? second question is does anyone know the color of the fuel pump wire that comes out of the fuse box?
-thanks plz dont flame =)

[420sx]

same gauge as the one on the pump. the red one. which one is hot. any kind of switch will work from autozone. you need the led one

[projectRDM]

Fuel pump wire at the relay is black/yellow but I'd recommend cutting the feed wire since it's low current, it's black/pink.

[IAM_SO_sLOw]

o ok thanks ill msg you about some more things i was wondering about =) i hope you dont mind

[ankyle62]

you could just splice the power wire and put a switch in between that wire.

[IAM_SO_sLOw]

o power wire? which one... lol im not good w/ electrics =X lol what guage wire should i use? 10?

[projectRDM]

you could just splice the power wire and put a switch in between that wire.

No fucktard, you should not cut the high current lead. Cutting the ECU feed is safer and does not require a heavy duty switch, plus it does not add resistance to the circuit which could possibly cause a voltage drop at the pump.

[IAM_SO_sLOw]

thanks for all the info guys especally to R240NA. i got it installed thanks