PDA

View Full Version : Which Maf?

TheSparo
05-19-2005, 10:29 AM
I was wondering which MAF would be the best performing, i know maf's don't give you power... i just mean the best flow and all
Q45
Cobra
Z32

and which years can you use for each one?
thanks
orion::S14
05-19-2005, 02:04 PM
Z32 is the most common, supported by all the ECU tuners and S-AFC, and has the most HP potential.

Z32 MAF should be the "N62"...from any '90-96 300ZX.

- Brian
TheSparo
05-19-2005, 04:28 PM
that's odd, i've heard the q45 flows more? not saying you're wrong, becuase i've only heard this once, but i just wanted to check
thanks
IAM_SO_sLOw
05-19-2005, 07:38 PM
i was wondering if i were to get a z32 maf onto my ka24de is it a straight plug in? or would i need a different plug or something?
-thanks
orion::S14
05-20-2005, 07:13 AM
From what I've seen, Q45 will only do ~400 or so...Z32 can do ~500rwhp.

And the plugs ARE different, you need the plug off a Z32 (Tomei sells a new one), and there are wiring instructions on the web...search around.

- Brian
IAM_SO_sLOw
05-20-2005, 12:37 PM
o ok... i was jus wondering... thanks
killjoy
05-20-2005, 12:53 PM
q45 definately maxes out earlier than z32.
the head
05-20-2005, 01:46 PM
i was wondering if i were to get a z32 maf onto my ka24de is it a straight plug in? or would i need a different plug or something?
-thanks

you will need a different plug and somthing to convert the signal to what is read by the KA ecu SAFC can handle that job just have to change the MAF translator settings so the ratios are correct for the MAF voltage output