just got my gramlights... lol the japanese cant measure...

[nigel1]

so I got my gramlights yesterday, (18 inch 57pro) and for shits and giggles I was measuring everything up to see the lip sizes and everything. so I measure the front total wheel width and oh my god! its a 10 inch wide front!!!?!! wow! what went wrong there?? and then I measure the back, and its an 11!!! lol!! that really trips me out. I hope I can stuff these things in there....
they should fit fine...

but as for offsets because everyone wants to know "how big is the dish..."

ok... here it goes. on a 18x"9" ("9") because thats what they say you are buying when its really a 10...

with a 17 offset you get a 70mm lip. in inches it is a 2, 3/4 inch lip...




The 18x"10" Zero Offset, you get a 107mm lip, and in inches its just shy of 4, 1/4 inch lip.

and for the new kids that are just getting into the game, these wheels were about 2100 shipped from japan. and they took three and a half months to get here.

if you all have any questions... you know what to do...


and if you reply negativly, you suck migrant farm workers cacks for quarters.

[citizen]

you are dumb~ wheels are measured on the inside of the lips because thats the space you use.

[nigel1]

why does that make me dumb?

:hammer:

[SimpleS14]

why does that make me dumb?

:hammer:

It's probably due to you making this thread, posting it in this section and giving it such a title.



:mepoke:

[SequenceGarage]

Just because you have baller rims doesn't make you a baller. Stop talking like a faggot, and learn about wheels.

[SimpleS14]

^-- that was harsh

[s13silady]

^word...

you measure from where the bead sits on the rim.... and and at times the bead sits on the lip...

[s14driftking]

you qre fucking dumb "i measure them and they were both an inch wider" fucking moron, "the japanese dont know how to meas..." onwed!!!

[Ritz S14]

^-- that was harsh

Harsh? It's the truth. Learn how wheel dimensions are measured. Why don't you try to measure the diameter of the wheel from lip to lip. You'd probably think they sent you a 19.5" wheel. :keke:

[s13gonwild]

^HAHAH he bought gramlights...what do you expect.

The best part was this made me fall on the ground. "and for the new kids that are just getting into the game"

[drew935]

"the Japanese don't how to measure" :nono: part makes me laugh. You bought them and now you're measuring them. You ordered that wheel probably through Mackin. What does it say on the box for the sizes...? :whip: :down:

[Giant Robot]

and for the new kids that are just getting into the game, these wheels were about 2100 shipped from japan. and they took three and a half months to get here.

if you all have any questions... you know what to do...

hahaahahahaa

i've been through 3 sets of wheels and had to wait 90+ days for eash set i bought from Japan. So quit trying to front like your the only guy on the planet that had to wait. There are plenty of other people who have the patience as well

oh and you measured your wheels wrong, so dont blame it on the Japanese, blame it on yourself.

[zenkiticks]

Just because you have baller rims doesn't make you a baller. Stop talking like a faggot, and learn about wheels.
i disagree with the baller rims part, but the rest is ok.

[nigel1]

whoops my bad... I dont need to be crucified for not knowing how to measure wheels. you learn somthing every day.

thanks for the enlightenment.

I just thought it was kinda funny that the total width was 11 because I was always under the impression that thats how you measure a wheel. no need for all the hate...

hey it would be worse... I coulda bought 38 offset 7.5 inch front and rear lol...

by the way, These wheels are sick as fuck. and well worth the wait.



I started this thread because I figured some people would want to know the lip sizes on the 57 pros.

[Yoshi]

whoops my bad... I dont need to be crucified for not knowing how to measure wheels. you learn somthing every day.

thanks for the enlightenment.

I just thought it was kinda funny that the total width was 11 because I was always under the impression that thats how you measure a wheel. no need for all the hate...

hey it would be worse... I coulda bought 38 offset 7.5 inch front and rear lol...

by the way, These wheels are sick as fuck. and well worth the wait.



I started this thread because I figured some people would want to know the lip sizes on the 57 pros.

"crucified" hardly. Most people that were crucified were martyrs who died for an actual cause that has/had some sort of redeeming social value, your rims are NOT at that level, even if they ARE Gram Lights ;) hehhehee

Seriously, what kind of response were u expecting when you trash talk about an entire race? Especially since most people on this board would LOVE to live in JDM-land... hell, several members go every year.

I'd made it a point not to say anything about your blatant racism (whether it was intended to be funny or not), especially since I AM 100% Japanese, AND I can use both standard and metric measure of rule just fucking fine thanks.

Did this thread get blown out of proportion? SURE!
But not any further than the original post was asinine, I think it was a pretty linear ignorance:flaming ratio... I HATE flaming, but it seems to me that the flames u got were pretty mild compared to how htings used to be around here. Best rule to follow... THINK before you post!

[The Riot Hero]

holy crap.

man you guys are some pissy bitches.

[drew935]

Yoshi has spoken :Owned:

[nigel1]

yoshi is the man.

thanks.

it seems you have extinguished the flame.

[dvdevo]

hey at least he took the flaming pretty well.. props for that.

[Pank]

what the hell wheels do you have that have barrels that are made out of metal that is half an inch thick??

[SequenceGarage]

I dunno man, I love 57pros. Maybe i'm a little biased since I had them on my old car though.

[floodo1]

wtf nigel you're putting 18x10 +0 on the back of your s14?
and 18x9 +17 in front?

[SequenceGarage]

18x9 +17 is good but 18x10 +0 is just gonna look so fucking stupid hahahaha

i tried 17x9 +5 on the back of my car and the rim stuck out almost an inch from the body.

I guess if you have rear overfenders +40mm it would be ok but you'd still need to stretch to fit. Not to mention you're wasting a lot of wheel well, you can still go in a good 40mm towards the suspension.

[speeddreamz]

wheres the pictures? =D

[floodo1]

18x9 +17 is good but 18x10 +0 is just gonna look so fucking stupid hahahaha

i tried 17x9 +5 on the back of my car and the rim stuck out almost an inch from the body.

I guess if you have rear overfenders +40mm it would be ok but you'd still need to stretch to fit. Not to mention you're wasting a lot of wheel well, you can still go in a good 40mm towards the suspension.

agreed, shoulda bought like 12" wheels if you're gonna have them stick out that far :) man that would own, get over 300 series tire!

[nigel1]

I have seen all sorts of people running 18x10's with a 17 offset or a 10 offset, or anywhere between 20 and 10 and its really not that crazy. another 20mm in is only around 3/4 of an inch. it just takes a little more work to get them to fit. and you get 20mm more dish to the wheel with that much more hawtness :P

when I post pics of these fuckers on there after its all said and done....

fenders rolled and pulled and painted...

plus I like the flared look as opposed to the widebody. so relax yall.


I think I will go in forum hibernation until I have everything on the car...

:)

ps my camera is missing and dad's camera is missing the cord to upload them to the computer.

[SequenceGarage]

you sir, are dish addicted. You need to chill. 20mm is a lotttt

Is it worth the extra dish to have a demented looking car?

[floodo1]

I have seen all sorts of people running 18x10's with a 17 offset or a 10 offset, or anywhere between 20 and 10 and its really not that crazy. another 20mm in is only around 3/4 of an inch. it just takes a little more work to get them to fit. and you get 20mm more dish to the wheel with that much more hawtness :P

when I post pics of these fuckers on there after its all said and done....

fenders rolled and pulled and painted...

plus I like the flared look as opposed to the widebody. so relax yall.


I think I will go in forum hibernation until I have everything on the car...

:)

ps my camera is missing and dad's camera is missing the cord to upload them to the computer.

man i hate you. 57pro's are like one of my top 3 or 4 wheels. but then i dont hate you cuz 98% of the time i can say i would never want those wheels (cept for that 2% where i dream of custom super widebody handlaid and bagged out of CF by.....MYSELF!....but in that case 10" wouldnt cut it....so yeah im revising that to 100% of the time).

still tho it will be nice to be able to look at your car whenever i want :) hehe yay for fresno luv.

still tho man 10" wheel with +12 offset is way out there already only hardcore people call that "flush". then again you got pull so that could cover up the +12 prolly, esp with your super narrow tires you prolly plan on running :)

look forward to watching your car progress man!

[supportTHEezln]

10"+0 would look cool with pulled fenders. I've seen S14s with those offsets and they don't look stupid with the fenders pulled/flared. Good job on getting good offsets.

[Giant Robot]

another 20mm in is only around 3/4 of an inch. it just takes a little more work to get them to fit. and you get 20mm more dish to the wheel with that much more hawtness :P
.

your logic is yet again wrong.

[420sx]

you guys are a bunch of haters and faggots. shame on you and your mothers

[Johny5]

lol, "baller wheels" hahaha

[Yoshi]

you guys are a bunch of haters and faggots. shame on you and your mothers

wow, this thread is just chock full of hatemongering. I guess it just wasn't enough to trash a whole race, we have to trash alternate lifestyle ppl too, I guess that was the next logical step right? :rolleyes:

Pretty strong words from someone who's already pinked... was this just a REALLY tasteless post so you can fan flames that the rest of us were trying to put out?

...just noticed that all your posts seem to have some homophobic reference somehwere in them, not to mention most of your posts seem to be flames :/ I smell a banstick coming.

:mad: inappropriate in ANY context.

[amolao]

nigel= :ghey:

[revat619]

you guys are a bunch of haters and faggots. shame on you and your mothers

You're on thin as ice as it is. I strongly suggest you keep quiet from now on if you want to stay on here. One more comment like that and you're gone. Period. You've been warned.

[R33GTS-T]

personally i wish him the best of luck on those offsets and widths........okay so he misunderstood how to measure a wheel.......really not the end of the world is it guys??? nah i didn't think so either ;)

i too am rather interested in seeing pictures of the car with the fenders done and the wheels on :D

any info yet on the progress???

btw nice wheels.......i had am on my old car;)

Late,
Daniel

[mrmephistopheles]

Don't be calling the kettle black when you're a pot.
Or rather, don't say the japanese can't measure when it's you that doesn't know the proper way to measure. It makes you look a little dumb.