Intercooler Kit Group Buy

[kings_blend]

***S13 full aluminum piping kits are now available for USD $485.
There is also a new design of the original s13 kit with rubber pipes. Pic is attatched bellow.***

New install pics on page 2.


Hey guys I know there are a lot of you looking for intercooler kits for a good price so I managed to dig some up. KGCM2 Infinity Performance in Australia is offering intercooler kits for the following at the following prices:

S13 = USD $450

S14/S15 = USD $470

Skyline = USD$460

WRX = USD $480

These intercoolers are bar and plate.
High flow power handle supported up to 700hp
Big inlet 76mm or 3"
High efficiency big core with internal fins
Low pressure drop 0.2psi at 15psi 80 psi tested

Dimensions:
Core Length : 24" (600mm)
Core Height: 12" (300mm)
Core Thickness: 3" (76mm)
Inlet Size: 3" o/d (76mm)
Outlet Size: 3" o/d (76mm)
"End to End" Length: 32" (800mm)
Heat Exchange: 72C - 24C

Shipping will be around $35 to US and $89 to International including Canada and will take between a week to two weeks depending on the location.

The only thing about the S13 piping is that it comes with plastic/rubber pipes from the intercooler (just like stock side mount pipes) but the coldpipe is aluminum. The rest of the kits are aluminum. Kits do not come with hotpipe, but those are easy to make/get. Couplers and clamps are included as well.
The S13 full aluminum piping kits are sold out right now and probably wont be in stock for a month or so. But the plastic/rubber piping has been tested and they said there was no HP difference in the numbers they got between aluminum and plastic/rubber pipes.

NOW FOR THE PICS!!!
http://www.kgcm2.com/images_product/s13kit4-L.jpg
S13 kit
http://www.kgcm2.com/images_product/s142-L(1).jpg
S14/S15 kit
http://www.kgcm2.com/images_product/gtskit4(1).gif
Skyline kit
http://www.kgcm2.com/images_product/wrxkit2-L.gif
WRX kit

The pics are from their website. This is an open group buy, and will be open for 30 days. After that prices go back up. If you have any questions please PM me or email me at [email protected] <(fastest way to reach me)

GOOD LUCK!

[infinitexsound]

are u from ca?

[Ritz S14]

Are these for the KA or SR?

[kings_blend]

Im in canada, but the kits are coming from Australia.

These are for sr, but if you think about it, the ka and sr both have the throttle body in the same area, so the cold pipe might work, and it dosnt come with a hotpipe so you can get one from HT or fab one up. The kit isnt very expensive so it could even be altered to work for the ka.

[TOMY]

are these in stock or are er going to wait a year to get them?

[sr240mike]

Kgcm2 sells them for the exact same price on ebay, so where's the groupbuy deal?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7974551851&category=33742
I can understand if that price is temporary just to get some positive feedback, but why buy this kit if there are other cheap alternatives for $30 more that include the hotpipe, all aluminum piping, silicone couplers, and t-bolt clamps?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7975166767&category=33742

[kings_blend]

these kits are in stock.

I didnt know they sell them on ebay as well. But i do know that they just started selling in north america. Maybe its just a way to get noticed. The kit you found on ebay from the other seller is just a generic one. The kit KGCM2 Infinity Performance sells is an actual shop run in Australia. Who would you turst more with an intercooler kit? www.kgcm2.com is there website if you would like to review it for yourself. A lot of people are uncomfortable shopping on ebay. This way you dont have to. As soon as these kits start selling in north america the price will go up.

[ballr858]

i'm most likely in.

[AzNCmB]

does it come with regular hose clamps or t-bolt clamps?

[kings_blend]

does it come with regular hose clamps or t-bolt clamps?
They come with regular hose clamps.

[ballr858]

anybody else have any opinions on the plastic hoses?

[240KAT]

how much for just the core?

[240KAT]

...with endtanks, s13

[kings_blend]

I will let you guys know ASAP when the s13 aluminum piping kits will be available.

240KAT the core alone without piping is $290 US with free shipping in the US.

Let me know if I can be of any more help. :)

[ballr858]

so should we be ordering directly from their site? aren't those ones on ebay the exact same ones???

[kings_blend]

so should we be ordering directly from their site? aren't those ones on ebay the exact same ones???

The ebay ones look to be the same, if you want to order, just PM me with your shipping address so I can calculate shipping (might be a little cheaper) as well as what kit you want, and your payment method, and I will email or Pm you all the details and all you gotta do is send payment and your IC kit will be shipped out on the following wednesday. ;)

[parker]

is it possible just to get the cold pipe? i need a S14 cold pipe

[kings_blend]

is it possible just to get the cold pipe? i need a S14 cold pipe
No sorry dude.

[richardxfeng]

Please let me know when the S13 kit is available, [email protected]
Also i have a question, Can the S13 kit fit in both pop up lights and Silvia lights style?
Thanks!

[kings_blend]

Please let me know when the S13 kit is available, [email protected]
Also i have a question, Can the S13 kit fit in both pop up lights and Silvia lights style?
Thanks!
The kit is available right now if you wish to purchase. The kit fits on the popup lights perfectly, but for the silivia conversion, you will need to modify the top bracket.

[PANGES]

so the skyline kit is for an RB into an s13? or is it just for a skyline?

[blk240sx]

so you only have the s13 kits with the plastic piping??? alsoi am in canada, edmonton to be exact my postal code is t6j-4k5, What would it cost to have an s13 kit shipped here!

[lotusdrift]

any chance of us getting a close up of the internal core and of the exterior fins.

[kings_blend]

fukuokas13, blk240sx, and PNAGES check your PM's guys.

There is a pic of the core in my first post, as for a pic of the inside I will get back to you on that one.

[lotusdrift]

I want to see the actual internal core design (the charge air flow path, fin design, header design, etc), the area inside the endtanks...you should be able to get a decent picture through the endtanks.

I'd also like to see a close up of the fin design in the ambient air path (face of the core).


Thanks, if you want to email them to me it is [email protected]

[TheSpeedFactor]

i would love to see the actual flow, psi drop and heat transfer numbers you guys see on this. i know who makes them and there are quite a few different numbers out there for it. for you guys running stock or close to it boost you will see heavy pressure drop. FOr the price though i guess you can't go wrong.

[TOMY]

i would like to get feedback of people who actually have this. I'm going Ka-T and i was wondering which pipes i could and could not use. Also.... could the S14 kit be a better option. I like the polished toobing!

[kings_blend]

I want to see the actual internal core design (the charge air flow path, fin design, header design, etc), the area inside the endtanks...you should be able to get a decent picture through the endtanks.

I'd also like to see a close up of the fin design in the ambient air path (face of the core).


Thanks, if you want to email them to me it is [email protected]
Pic has been added at your request. Go up to the first post to see.

[kings_blend]

i would like to get feedback of people who actually have this. I'm going Ka-T and i was wondering which pipes i could and could not use. Also.... could the S14 kit be a better option. I like the polished toobing!
The s13 kit is also available with aluminum piping. The s14 kit might need a little fabbing but for the price it dosnt really matter. Note that the s13 hotside piping is not all one diameter. See the pic up top.

[richardxfeng]

So did you find out if the S13 kit will fit on both head lights style? And how much more for the kit with alumnium piping? Thanks!

[drifter_e]

can we buy just the piping for the s13 for sr in aluminum, and if so how much shipped?

[kings_blend]

So did you find out if the S13 kit will fit on both head lights style? And how much more for the kit with alumnium piping? Thanks!
The kit fits the popup style headlights. Silvia front will need to modify the top bracket.

drifter_e - No the piping does not come seperate. Sorry.

[kings_blend]

Here are some pics of the s13 aluminum kit installed on an s13. Note this is not my car, it belongs to Andrew Harvey, he sent me a testimonial along with some pics of his install, here it is:

I like the kit a lot and it is made very well. It is definitely worth the money I spent, considering most other kits are in the 600-1000 range. He shipped it on a Monday and I received it that Wednesday afternoon, which is incredible considering it went through customs and all. Here are some pics of when I first started the install. I will send you some more once it is done. There are only two things that you will have to do. You will have to make special brackets for the bottom or just run without them. And it doesn’t come with the coupling that goes from the turbo hot pipe to the intercooler hot pipe. You will need a 45 degree coupling to make it fit. Over all I am very impressed with the fitment on this kit. I have seen other kits that cost almost twice as much and they didn’t look as good. This kit doesn’t have any clearance issues with the hood unlike some other kits I have seen.

http://i7.photobucket.com/albums/y282/kings_blend/cid_image001.jpg
http://i7.photobucket.com/albums/y282/kings_blend/cid_image002.jpg
http://i7.photobucket.com/albums/y282/kings_blend/cid_image003.jpg
http://i7.photobucket.com/albums/y282/kings_blend/cid_image004.jpg
http://i7.photobucket.com/albums/y282/kings_blend/cid_image005.jpg
http://i7.photobucket.com/albums/y282/kings_blend/cid_image006.jpg
http://i7.photobucket.com/albums/y282/kings_blend/cid_image007.jpg
http://i7.photobucket.com/albums/y282/kings_blend/cid_image008.jpg
http://i7.photobucket.com/albums/y282/kings_blend/cid_image009.jpg
http://i7.photobucket.com/albums/y282/kings_blend/cid_image010.jpg

[Slidin240Wayz]

What fabrication is necessary for the s14?

[kings_blend]

What fabrication is necessary for the s14?
No fabrication necessary.

[lotusdrift]

Can you sell just the aluminum piping/couplers/hardware by itself w/o the core?

[Slidin240Wayz]

"The s13 kit is also available with aluminum piping. The s14 kit might need a little fabbing but for the price it dosnt really matter. Note that the s13 hotside piping is not all one diameter. See the pic up top."

[kings_blend]

"The s13 kit is also available with aluminum piping. The s14 kit might need a little fabbing but for the price it dosnt really matter. Note that the s13 hotside piping is not all one diameter. See the pic up top."
Read a few posts before, I was replying to a guy asking if the kit would work on a KA. Read harder next time. ;)

[kings_blend]

Can you sell just the aluminum piping/couplers/hardware by itself w/o the core?
No but you can just sell the core by itself if you dont need it right?

[drunkenmunky23]

will this kit fit over the stock 240sx bumper?

[DrifterProdigy85]

that intercooler is huge. Would it fit with my stock 89 pignose bumper? Also it looks like the bumper beam cant be used.

[kings_blend]

Guys just like every other 240 with a huge intercooler, you need to cut the bumper, itll prob fit behind the support but you might wanna cut it anyway.

LESS THAN 2 WEEKS LEFT IN THE GROUP BUY PEOPLE!!!!!!!!

[Jcb890]

i was thinking of buying an s13 kit with the aluminum tubing... any pics of the aluminum tubing instead of the rubber? also, is the piping bead rolled on the ends?

also, how long will it be till we recieve the kits? I live in MA zip 01545, what would my price be with shipping and when will i get it? thanks.

[Dunkee]

Those are the hybrid or Hipro intercooler pipes. You can get them off ebay for like $350. I have them they are nice quality but huge (2.5, 2.75). They sell different kits for S13 and S14 and they include hot pipe. Just do a search for S14 or S13 incooler piping on ebay, they'll come up but sometimes you have to wait for them to put them up for bid...or you can try emailing them.

[kings_blend]

i was thinking of buying an s13 kit with the aluminum tubing... any pics of the aluminum tubing instead of the rubber? also, is the piping bead rolled on the ends?

also, how long will it be till we recieve the kits? I live in MA zip 01545, what would my price be with shipping and when will i get it? thanks.

Um look 10 posts above this one and your question will be answered. Read the testimonial too. Shipping is about 35 bucks maybe even less if your closer to australia lol.

[Jcb890]

Um look 10 posts above this one and your question will be answered. Read the testimonial too. Shipping is about 35 bucks maybe even less if your closer to australia lol.

Sorry, I'm an idiot, didn't see the testimonial... check your PMs :naughty:

[kings_blend]

Sorry, I'm an idiot, didn't see the testimonial... check your PMs :naughty:

No problem. NOW CHECK YOURS!!! lol

[ballr858]

as far as the s13 kit used on a silvia front end, can the brackets be used at all or will it need custom brackets?

[PANGES]

i wanna see pics of it on an RB'd S13

[kings_blend]

as far as the s13 kit used on a silvia front end, can the brackets be used at all or will it need custom brackets?

I recelntly spoke to a guy that used it on a real Silvia in Aus. He said the brackets need to be modified. But since you have a 240sx with Silvia front I doubt they will need to be modified since its still being mounted in the same location as if you had your stock front end. This is hard to answer since I cant really see how it looks. But do you understand what Im trying to get at?

***This group buy ends in about a week guys jump on it.***

[SirWarrior]

I would be interested in one of these.
Can you get more? Maybe another group buy?
I'll need one in about a month or so. So no hurry.

[kings_blend]

Group buy is done, but you can still email them or catch em on ebay. :)