PDA

View Full Version : G2871R and Os Gilken twin plate *some Q*

fliprayzin240sx
05-16-2005, 01:27 AM
Whats the stock boost for the actuators on the GT2871R?
Lastly, to anybody running this clutch *if any* I know you have to run a smaller TOB but for some reason, it still seems to be preloaded so clutch is slipping. Did anybody have this same problem or any suggestion on how to fix it?
Mike Wazowski
05-16-2005, 04:52 PM
Whats the stock boost for the actuators on the GT2871R?
Lastly, to anybody running this clutch *if any* I know you have to run a smaller TOB but for some reason, it still seems to be preloaded so clutch is slipping. Did anybody have this same problem or any suggestion on how to fix it?
did you get a new sleeve too or just a smaller TOB?
s14srpilot
05-16-2005, 07:43 PM
i hope you didn't charge that $hit on a credit card...
fliprayzin240sx
05-17-2005, 01:16 AM
did you get a new sleeve too or just a smaller TOB?


Well I got the shorter TOB, but the clutch is still preloading. I was browsing around Venus today and found 2 TOBs. One was shorter than the other so :doh: , imma run the shorter carrier with the shorter TOB. Hopefully thatll solve that problem. But anyways....GT2871R boost setting???
BillKlineVT
05-17-2005, 12:02 PM
there really isnt a "stock" boost on the actuators since they are adjustable, but I'd say the lowest you can go is around 9 psi, which is where I'm at right now, and that is with very little room left on the actuator rod, so I wouldn't go any further to try to make lower boost.
TheSpeedFactor
05-17-2005, 12:18 PM
how are you liking the turbo bill? hope everything is going great.

The 2871 generally is set for 10-12 psi on it's own. It does vary on each car but that is where it is generally at.
Campos
05-17-2005, 12:35 PM
do you have a part # for the smaller tob?
Mike Wazowski
05-17-2005, 01:34 PM
do you have a part # for the smaller tob?
30502-14601