98 OB2 harness w/ 95 motor?

[Shaminii]

I currently have a 95 240SX and about to swap 98 motor into it. Question - would a 95 ob1 wire harness and ecu work with 98 motor? Thanks.

[Maeda]

It will with a little wiring.

EDIT:
As in the ecu's are a little different...
The electronics are a little different...
But it definetly CAN work.

[projectRDM]

There's no need to 'make' it work. Use the 95 coolant, TPS, and O2 sensors and just leave the extra EVAP parts unhooked. The motor itself is no different, there's just a few added parts, none of which you'll be using.

[vinhisbored]

yeah, the engine should work.. sensors on the two will be a little bit different, but nothing serious. and i believe that the 95 ecu will work though

[s14shrkeye]

You might be able to just swap intake manifolds and all of the vacum hoses/ wires that come attached to it.

[infinitexsound]

ur stock mani and harness will bolt up... remove intake on the new engine...

[Shaminii]

i know that the ob1 ka intake mani is different compared to the ob2 ka intake mani. i don't thinks its really necessary to swap the intake mani since i'll be using the 95 ecu/harness on the 98 motor. or should i?

[projectRDM]

Swap coolant and TPS, just like I said a few posts up that you apparently skimmed right by.