Boost Designs KA-T manifold and downpipe KA24DE

[klattr1]

I am selling my KA-T manifold which is framed for a t3 flange and HKS 40mm wastegate in which I used a Precision SC61. I dynoed 406 rwhp and 385 ft.lbs with this manifold. The wastegate pipe will not come with the flange on it so you can have whatever wastegate flange welded on you need. The downpipe has a t3 5bolt flange on it, 2 o2 sensor provisions and bottom 3 bolt flange which really doesnt bolt up to anything (stock downpipe or whatever) since I ran it open downpipe.

I am wanting $360 for the manifold/downpipe combo plus shipping.

EMAIL ME AT: [email protected] for further info

Pictures are here:

http://www.ka-t.org/klattr1/bdmanifold/smallerpics

[s13koupe]

link not working. Is the dp for s14 or s13?

[nlzmo400r]

i believe klattr1 is s14, and he did say it had 2 o2 bungs on it, so that would be s14 correct?

[klattr1]

link not working. Is the dp for s14 or s13?
the link is working now. sorry for the broken link.

the DP is designed for a S14 setup but it really doesnt connect to the S14 downpipe since I ran an open downpipe setup. You could just have it finished off at an exhaust shop if you wish.

im sure it would work for a S13 as well as far as clearances go.

[klattr1]

it has sold!