help on turbo timer install!!

[SignalAutodrifter_D]

ok i just bought a blitz DCII turbo timer....and i dint know that i needed to buy a harness so i ordered that and i got it all here...i hooked most of it up just need to find.....12V wire under the steering wheel to splice into..and a ignition wire to hook it up to....so if anyone knows what they may look like help me out...(tell me if its green with a yellow line or what not)

then i have that vacumm line that i need to hook up for boost reads..they say it goes to the throttle body but where..there is a spot on the lower left hand side that i can use but is that correct...please help

[drew935]

I'm going off a S13 wire diagram.
B/R- ign 12v
B/W - 12v constant

As for the boost hose, tap it off you wastegate. You need a t- tap hose connector. Does the kit you bought have the connectors and the manual>? :duh: Anyway, it should be straight forward from there. :w00t:

[SignalAutodrifter_D]

koo that sounds good from there....!! have you done it before or you jus going of the wire diagram...??

[drew935]

I haven't done it on any 240s. Just subies, evos, a civic, and one other car...