View Full Version : 300ZX MC non ABS
KaFkA
04-22-2005, 06:21 AM
I searched, i swear.
Th prob is -- i dont have a ABS on my S13. So do i need ONLY 3 port MC or is it possible to unplug the 3rd hole on a ABS one? The problem is its difficult to find something here, so i dont have a lot of choice. Thanks.
nlzmo400r
04-22-2005, 06:53 AM
Theres been a few threads about this somewhere, may not have been here. Anyway, yes you have to unplug the middle spot. Use a hex wrench to get it out, and then you're gonna need either a bubble flair fitting (out of your 240 m/c) to put in there, or a reverse'd line, to where the fitting is backwards, just on the brake line itself (which would include changing brake lines). So just do the first option
importnut
04-22-2005, 07:06 AM
I searched, i swear.
Th prob is -- i dont have a ABS on my S13. So do i need ONLY 3 port MC or is it possible to unplug the 3rd hole on a ABS one? The problem is its difficult to find something here, so i dont have a lot of choice. Thanks.
Didn't search hard enough :)
MC info (http://importnut.net/300zxbrakeswap.htm#MC)
-Alex S.
KaFkA
04-22-2005, 07:07 AM
Thanx. Think will look for non ABS one.
importnut
04-22-2005, 08:18 AM
Thanx. Think will look for non ABS one.
Well, problem is, there are no non-ABS Z32's in the states. The MC's are the same, just with the plug in one of the front ports. No big deal to pull it out.
-Alex S.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.