PDA

View Full Version : Need help wid wide fenders


someguy_240
04-21-2005, 07:58 PM
Ok i want to get 17x9 + 15 all around on a 89 s13 with 235/40/17 tires, problem is im gettin front +20 fenders. :duh:

Someone told me if i do that, ill have that sunken look and i dont want a sunken look. :rl:
they also told me i should aim for 17x9 0mm offset. Will it be sunken wid 17x9 +15mm specification? i dont want to camber my wheels to fit in the wheelwell but what should i be aiming at? at any wheel recommendations? hard to find anything under 17x9 +15mm

i dont want to go 18" but if there is anything in 18x9 or under that will make it flush im open

dan

Gjohnson7
04-21-2005, 08:23 PM
17 x 9 + 20mm.
http://memimage.cardomain.net/member_images/4/web/292000-292999/292700_112_full.jpg
http://memimage.cardomain.net/member_images/4/web/292000-292999/292700_113_full.jpg

SilviaDriver
04-21-2005, 08:31 PM
simple, use a spacer

91CRXsiR
04-21-2005, 08:41 PM
17 x 9 + 20mm.
http://memimage.cardomain.net/member_images/4/web/292000-292999/292700_112_full.jpg
http://memimage.cardomain.net/member_images/4/web/292000-292999/292700_113_full.jpg

that sticks out a tad too much for my taste

Gjohnson7
04-21-2005, 08:55 PM
that sticks out a tad too much for my taste

Don't trip. Wide body will be coming soon!

SilviaDriver
04-21-2005, 09:12 PM
ur going wide body for 17x9 +20!?! not even worth it. juss put camber and pull

lilredstiffy
04-21-2005, 09:12 PM
wide body??? just stop running zero camber

nigel1
04-21-2005, 09:25 PM
jebus christ!!! go get a basball bat and roll that mug out! or go bum an eastwood fender roller off someone and do a roll and pull! it dont look too nice..


oh yeah as for the question about flushness with over fenders...

the answer is: spacers. you can put spacers to make it flush. but a +15 will reqire a roll in the back. so plan on it.

Gjohnson7
04-21-2005, 09:37 PM
Still considering pulling, but can't find a fender roller in my area. I even contacted Tire rack (I think that's who it was) about renting a roller, but they said it was about a 6 to 9 month waiting list. Anyone know where you can rent one my area. (Tulsa, Oklahoma)

SilviaDriver
04-21-2005, 09:41 PM
renting a fender rolling from somebody here [put down payment] vs wide fender [300 for fender + apprxo 400-500 labor]

not a hard decision to make.

someguy_240
04-21-2005, 09:45 PM
unfortunately i have fiberglass fenders the guy who i bought the s13 conversion from had them and they are kinda broken towards the bottom...

spacers / adapters are my last option

if i can find a low 17x9 offset like 0 or 5 whatever then ill just get a 17x10 something i guess it probably be the same weight as a 17x9 + spacer or maybe more i dunno exactly. But seriously someone has to kno of some 0-10 17x9's? or equivalent?

thanx for all info

Gjohnson7
04-21-2005, 09:51 PM
renting a fender rolling from somebody here [put down payment] vs wide fender [300 for fender + apprxo 400-500 labor]

not a hard decision to make.


So who do you know that will rent one out? I refuse to use a bat. I need to get this done asap, my tires rub in the back under hard cornering. Hopefully, I will have coilovers within the next 2 to 3 months.

Dousan_PG
04-21-2005, 09:56 PM
use a hammer (mallet) and propane torch
i did it on my cars and friends
comes out perfect for roll job

squalsme
04-21-2005, 10:13 PM
well, iono if this helps. im the fronts, i'm running 17x9 +16 with 225/45/17 and in the rear 17x10+24. running 245/45/17. i would get smaller tires if i can...


here are the pics, before i rolled my fenders:

http://img.photobucket.com/albums/v414/squalsme/elizabeth3.jpg

http://img.photobucket.com/albums/v414/squalsme/elizabeth4.jpg

http://img.photobucket.com/albums/v414/squalsme/elizabeth1.jpg

http://img.photobucket.com/albums/v414/squalsme/elizabeth2.jpg

http://img.photobucket.com/albums/v414/squalsme/elizabeth6.jpg

here it is after it is rolled and pulled:

http://img.photobucket.com/albums/v414/squalsme/IMG_1543.jpg

http://img.photobucket.com/albums/v414/squalsme/mine3.jpg

http://img.photobucket.com/albums/v414/squalsme/240sx014.jpg

dont really have any close up pics of it when its rolled and pulled, but i definitely dont think its worth it to go wide body for 17x9. i rubbed like hell b4 i rolled and pulled. hope this helps.

nigel

Ian
04-21-2005, 10:16 PM
nigel...your car is nasty

but it needs aero and a black roof


then you can make a poster and i will buy a couple of them off of you lol

Gjohnson7
04-21-2005, 10:16 PM
Man your car looks awesome.

Ian
04-21-2005, 10:21 PM
not to mention all of the pics seem to be lit very well

SRkouki
04-21-2005, 11:31 PM
http://img.photobucket.com/albums/v414/squalsme/elizabeth6.jpg


beautiful wheels god damn

Ian
04-22-2005, 12:12 AM
look how reflective the lip is...it looks like there are 2 rows of fasteners on the bottom

MakotoS13
04-22-2005, 10:20 AM
nice car, now if only it had fender covering those wheels.