18" burning black Work VS-KF

[Johny5]

specs: 18x8.5 +32 fronts 18x9.5 +32 rears
tires: 235/40/18 bridgestone potenza GIII's up front 265/35/18 bridgestone potenza GIII's in back 50% tread all around

roughly 3.25" lip in back, 2.5" or so in front

http://img.photobucket.com/albums/v338/kidnrg/DSCN0984.jpg
http://img.photobucket.com/albums/v338/kidnrg/DSCN0992.jpg
http://www.pbase.com/wongfeihung/image/41831096/large.jpg

there is extremely minor curb rash in small locations from previous owner overseas. will post pics of this upon request.

asking $2000. will ship at buyers expense.

AIM: Johny5 NOTaRoBoT
email: [email protected]

[chris4130]

So are ya getting another set?

[Johny5]

no clue, kinda wanna change it up a bit.

[chmercer]

bump for some hot ass rims

[s14srpilot]

paint your body kit for heaven's sake. your car looks like a ghetto honduh.

[CoasTek240]

please email me pics or send me links to better pics. i need something a lil closer, i also wanna see the slight damage.
i'm very interested and serious. i was just looking to source a set of these?
can i ask you where you bought them?

email me @ [email protected]

[Mr_zero]

Those are my dream rims....


aiya, no 5 bolt and no 2g to spare.....

gl with the sale! bump for sick sick rims!

[Johny5]

http://img.photobucket.com/albums/v338/kidnrg/DSCN1024.jpg
http://img.photobucket.com/albums/v338/kidnrg/DSCN1023.jpg
http://img.photobucket.com/albums/v338/kidnrg/DSCN1022.jpg
http://img.photobucket.com/albums/v338/kidnrg/DSCN1019.jpg
http://img.photobucket.com/albums/v338/kidnrg/DSCN1018.jpg
http://img.photobucket.com/albums/v338/kidnrg/DSCN1017.jpg
http://img.photobucket.com/albums/v338/kidnrg/DSCN1020.jpg
http://img.photobucket.com/albums/v338/kidnrg/DSCN1021.jpg

and the last picture explanation, i took 5 different angle pics to show this damage as the scratches dont' even go past the clear coat, they can be wetsanded right off. i don't trust an idiot like myself with any kind of sanding near vs-kf so i left it alone. its very unnoticeable but if i didn't point out everything wrong with these wheels i'd feel like a total cock.

http://img.photobucket.com/albums/v338/kidnrg/DSCN1025.jpg


as you guys can tell the rims are very dirty. car isn't my daily driver so they've sat for the last 2-3 days in rain. i'll be glad to give her a bath and snap some pics for you guys if you really need them.

[SoCalSilvia]

sick wheels.... I actually think the car looks hot with the black aero. I definitly think you should keep the wheels bro, they go so well with the aero.

[Johny5]

the wheels i'm planning on getting look just as hot i promise! :)

[t0ekn3e]

nice wheels my nieghbor has these on her sl500

[Johny5]

:hyper: :hyper: :hyper: :hyper: :hyper: :hyper: :hyper: :hyper:

[mr_240sx]

4 or 5 lug?

[eyustfu]

they are 5 lug

[s14srpilot]

the wheels i'm planning on getting look just as hot i promise! :)

I don't give a rat's ass if you get work equip's or meister s1's. Your car will look ghetto ass whacked until you paint the body kit.

[Johny5]

sorry dude, not interested in your opinions or comments. maybe you can start your own thread or book if you'd like :hsdance:

ok, sorry, the wheels are 5lug.

[Dousan_PG]

nah he's right you need to apint that shit

wheels are nice but isnt retali for new like 2200ish?
work isnt too bad i thought, but not sure

good luck on sale.
id be intersted if the fronts were better sizing.and rear offset lacks

good luck though, nice wheels. :)

and paint your car.

[Johny5]

don't worry dude, paint is coming, i just need to finish project turbo first, had that shit chillin at my house too long not on car. wanna just do the whole thing in white maybe throw silver flake in not sure yet.

[Brian]

paint your car.

[Johny5]

yeah you know what? if i wanted to know pg cali opinions i'd post a rate my car thread on ziptied.

however, i don't wanna know what you guys want me to do with my car. the piece of shit is going to get painted if i want it to. end.

[Brian]

so, paint?

[revat619]

Pink Godzira is uber gay. Anymore comments from the PG gallery about paint and such and i'll Godzira chomp you myself. Who wants the BANSTICK!!! You know i'm bad, i'm bad, i'm really really bad! Shaaa'mon! :p

[chris4130]

wheels are nice but isnt retali for new like 2200ish?


For volks maybe... retail on those wheels is more like $2700ish (msrp) TougeFactory sells em for about $2500

[sj250]

How do they fit front and rear as far as flushness? Did you have to pull the rear fenders for clearance? Are you willing to ship to Canada? Thanks.

[Johny5]

canada shipping? i dunno how to even do it, but i'm sure its very expensive.

[Johny5]

http://img.photobucket.com/albums/v338/kidnrg/Key.jpghttp://img.photobucket.com/albums/v338/kidnrg/Key.jpghttp://img.photobucket.com/albums/v338/kidnrg/Key.jpg

hehe, get it? key key key. nvm i'm fucking bored, bump!

[zenkiticks]

How do they fit front and rear as far as flushness? Did you have to pull the rear fenders for clearance? Are you willing to ship to Canada? Thanks.
i guess you don't know. the question you need to ask is "how big of a spacer do i need to run to make these look half decent???"

[Johny5]

25 bolt on front
16mm of plates in back was my setup.

[Johny5]

p.s. bolt-on spacers get sold with the wheels, but i need the plates.

[sj250]

i guess you don't know.

That is usually the general reasoning behind a question, but thanks anyways for pointing out the spacers.

[s14srpilot]

25 bolt on front
16mm of plates in back was my setup.

My 17x8 +25 fronts might suck but it's still better than those shitty offsets. No wonder you are selling them. Spacers are a lame fix for not buying the proper offsets in the first place. It cuts into the lip depth. Anyway, someone should buy them. Good luck

[SilviaDriver]

My 17x8 +25 fronts might suck but it's still better than those shitty offsets. No wonder you are selling them. Spacers are a lame fix for not buying the proper offsets in the first place. It cuts into the lip depth. Anyway, someone should buy them. Good luck

right and this post has nothign to do with the sale, rather downing his wheels, so why post? the only thing good about it is the sentence in bold, and still has nothing ot do with the sale.

he bought the wheels used, now wouldnt u think he would buy the right offset if he bought them brand new?

[chmercer]

My 17x8 +25 fronts might suck but it's still better than those shitty offsets. No wonder you are selling them. Spacers are a lame fix for not buying the proper offsets in the first place. It cuts into the lip depth. Anyway, someone should buy them. Good luck

dude get out of here with that shit. nobody wants your stupid crackerjack cast honda accord offset wheels. it cuts into the lip depth? 57c is like one of the worst wheels for cheater lip ever. thats like saying a +40 sa3r has a 5 inch lip. who cares, it still sucks. just like 17x8 +25 sucks. just like oem aero sucks. just like having jdm badging sucks. just like having subs in your car sucks.

[Johny5]

haha thanks for the kind words guys :) i did buy the wheels used as posted above so i couldn't choose the offsets. on the next wheels, extreme sizes are guaranteed. i'm feelin 17x8 +35 fronts 18x8 +25 rears, s14srpilot style all the way boyeeeeeee!

[Romeyo07]

Stew, you're a moron...that is all.

Dood, you're never on AIM anymore. I need someone to talk to while goofing off.

[chris4130]

My 17x8 +25 fronts might suck but it's still better than those shitty offsets. No wonder you are selling them. Spacers are a lame fix for not buying the proper offsets in the first place. It cuts into the lip depth. Anyway, someone should buy them. Good luck
You're retarded... but your right, your wheels do suck

[drift into a curb]

Norm, dump your car already.

Johny5, paint your kit already. Looks good with the spacers, gotta give it that. Free bump por ju mang.

[zenkiticks]

25 bolt on front
16mm of plates in back was my setup.
wow. how in the hell did you pull that off? long wheel bolts I hope? if so, how many full turns on the lugnuts were you able to get?

[Johny5]

9-10 full turns. i roll nismo 60mm studs all around in case i only need plates, but for those certain instances i bolt my 25mm bolt-ons onto the 60s, sometimes with a plate between the rotor hat and the bolt-on. depends on how hard i wanna park it.

[zenkiticks]

just because i don't feel like walking down all those steps to the garage, taking my wheel off, and measuring, how much longer than stock are the nismo wheel bolts?

[Johny5]

well, with stock a 5mm plate is pushing it, with nismo 60s, i can fit a 20mm plate safely. so lets guesstimate about 20-25mm longer. hth!

[zenkiticks]

well, that should be cheaper than two sets of spacers anyways....

[Johny5]

yeah, but like i said, these wheels are being sold included with a pair of +25mm spacers, can throw 4 8mm plates in with it too, but you guys gotta get he 60mm studs. $60 for rear 10 iirc.

[MoK]

Keep that shiot yO!!!!!

[OptionZero]

Don't worry, his next set will have the "correct" offset I have no doubt.

[Romeo350z]

Hmmm, I wonder how these would look on my 350Z...

[zenkiticks]

Don't worry, his next set will have the "correct" offset I have no doubt.
that's fine. i'm not bashing him. kind of pointless, he bought used wheels and made them work.

[s14srpilot]

All right jonny5 sorry to be a jerk. hope u sell the wheels soon. chmercer and chris4130 good thing that this is the internet and that I think both of your opinions SUCK or I would have taken what you posted personally.

[chris4130]

chris4130 good thing that this is the internet and that I think both of your opinions SUCK or I would have taken what you posted personally.

O NO! PLEASE DON'T TAKE IT PERSONALLY!!!!!!!! Did you feelings get hurt, becuase you foolishly bought wheels that look like shit? I'm so sorry.

[SilviaDriver]

All right jonny5 sorry to be a jerk. hope u sell the wheels soon. chmercer and chris4130 good thing that this is the internet and that I think both of your opinions SUCK or I would have taken what you posted personally.

http://www.dotolearn.com/picturecards/images/imageschedule/nocrying_l.gif

[chmercer]

http://img186.echo.cx/img186/3401/sasaassasasa3vp.jpg

[SilviaDriver]

http://www.uta.fi/~anne.katariina.jokinen/crying.gif

[nigel1]

:rofl: :rofl:


bwahahahahahahahhaahha @ ^^^^^^^^

free bump for the badass wheels and btw you can easily polish those scratches out with some blue magic and some 500 or so grit sand paper. = more $$$

good luch on the sale free bump.

p.s my car is almost done.

[Raine]

damn not sold yet? I swear if I had the $ right now I'd be polishing them as we speak

[Johny5]

hehe yeah unfortunately not sold yet, still workin on it though and getting some decent offers.

[s14srpilot]

hahaha you have GOT to be kidding! There is no way in hell that I would ever be butt hurt by the likes of chmerser, cris420 or wannabe silviadriver. The reason for my apology was for jacking the thread. It takes a man to fess up when he realizes that he made a mistake, but only weaksauce pussies take cheap shots at people who try to come correct. Dream on...

BTW I don't wanna jack this thread anymore so bump for a set of work vs-kf wheels

[SilviaDriver]

wannabe? hahha ive been around before you even knew was RWD was. you wouldnt have to try n "be a man" if you didnt make a stupid mistake in the first place right? so dont come all up in here saying you are a "bigger" person by saying sorry.

saying sorry doesnt cover up the following:

1. you being a man
2. how stupid you made urself look in this thread
3. your wheels.

end game.

[Johny5]

last bump. last serious buyer backed out. if these don't go then i'm keeping them until further notice :-/

[SilviaDriver]

for an incentive for you to sell your wheels, if you dont, u will die.

sell it to me for 500

[Johny5]

if i don't, then i space them 35mm front and 30mm rear and make them so flush it hurts.

[mav1178]

i guess you don't know. the question you need to ask is "how big of a spacer do i need to run to make these look half decent???"



HAHAAHAH.

I find it extremely amusing that people are bagging on the seller of the wheels.... when they are talking nonsense.

"halfway decent" is something that cannot be judged for each car. Just for everyone's info:

On S13:
- The fitment would be almost perfect front/rear. At most, rear minor rolling of fender, tire selection does NOT have to be stretched. Front might not work with coilovers like Zeal, but will work with JIC or ones with better lower bracket clearance. Ask Aaron (Dousan) about this, he did his research already.
- Will NOT need any spacers. Unless you want stretched look with super camber.

On S14:
- Fitment will actually allow good tire choices, especially if you run "normal" tire or want more meat on the tires. No fender mods AT ALL.

I really don't get why people are dissing him on the offset of the wheels when they are fine. I understand some people want it to be "flush" but even the definition of "flush" varies from person to person... and car to car. It would be almost pointless to say what is flush and what isn't, without any knowledge of tire size, alignment specs, fender mods (if any), etc.

And if anyone wants to argue wheel setups with me, I'm game. I've been in the industry long enough to know my wheels... ESPECIALLY WORK WHEELS.

Just ask Jay (CleanS14). HAHAHAHAAH.

-alex

[mav1178]

ANyhow, Here's another fast bump, because the seller is selling a decent set of wheels for a decent price, WITH DECENT OFFSET.

If you want extreme offset you can always go order a new set of VS-KF. With Golden Week this week in Japan, you can be lucky if you see your wheels before AUGUST or SEPTEMBER.

-alex

[Johny5]

word, thanks for the bumper bro!

[eyustfu]

i agree with Mav1178, people these days are going a little too far with low offset wheels, there are people out there who prefer a little higher offset (30's in the rear) like myself inorder to fit wider tires(275's +) without having to do an extreme fender pull or wide fenders

[r thizzel]

...bumper?!? how bout you put yours back on ya asshat :keke:




haha first post for me

[chris4130]

HAHAAHAH.

I find it extremely amusing that people are bagging on the seller of the wheels.... when they are talking nonsense

If you believe everything you just wrote below this statement, then what you quoted zenkiticks saying is not nonsence. You can't have it both ways and say, everyone has their own personal opinionto what looks right, and then call someone an idiot for saying what he thinks looks right.

No one is doubting your "ALL KNOWINGNESS" of work wheels. Nor does anyone really care how much you know about them, becuase it is quite frankly irrelevent.

I like the wheels, personally I ordered mine in a much lower offset, but that's just because I think they look better with a bigger lip.

How much tire is a "decent size" tire? lol

Anyway, Jonny you know I love the wheels :-) Goodluck selling them and BUMP.

[chris4130]

i agree with Mav1178, people these days are going a little too far with low offset wheels, there are people out there who prefer a little higher offset (30's in the rear) like myself inorder to fit wider tires(275's +) without having to do an extreme fender pull or wide fenders

Unless you're making over 500whp i don't see why you need that big of a tire (275+++) I mean @ 300-400hp 245-255's are fine (what I ran @ 350whp) and you can still run a fairly low offset with just a roll on s14's.

[zenkiticks]

ANyhow, Here's another fast bump, because the seller is selling a decent set of wheels for a decent price, WITH DECENT OFFSET.


you're retarded. don't be so quick so quick to play your "omniscient" card(s). the guy said he would've picked lower offsets had he bought them new. if you read the entire thread, i was merely helping someone else figure out that the wheels may fit differently on his/her vehilce due to the fact that the seller uses spacers. a little sarcasm? yea, who cares, and the seller agreed.

[eyustfu]

Unless you're making over 500whp i don't see why you need that big of a tire (275+++) I mean @ 300-400hp 245-255's are fine (what I ran @ 350whp) and you can still run a fairly low offset with just a roll on s14's.
245-255 was not enough at near 300rwhp, my new setup should be near 400rwhp, so having decent traction would be nice

[Johny5]

wheels sold for asking price :D thanks for your interest guys.

[revat619]

SWEET!!! Now go buy your other wheels!!! GO, YOU BUY NOW! :D

[chris4130]

wheels sold for asking price :D thanks for your interest guys.

Congrats man! Can't wait to see whats next :-)

[Johny5]

hehe nothing big, i stopped short of expected wheel goals to put money somewhere else in my car. good wheels is shit without anything else in any area.