PDA

View Full Version : 240sx + S13 + S14 + SR20 Stock & Aftermarket Garage Sale

the tech
04-18-2005, 08:40 AM
89 240sx:

-pop up headlights with HID bulbs and housings (missing one headlight cover driver side)
-driver and passenger side fenders (passenger has some dents, driver is ok)
-stock hood (one small dent)
-stock hatchback taillights
-stock hatchback rear spoiler
-stock front and rear sway bars
-stock driver and passenger seats (driver has the usual worn spot on left side)
-Sparco driver side seat bracket

S13:

-driver and passenger fenders (both have dents that will need to be repaired but will be easily taken care of at a body shop)
-JDM analog gauge cluster
-Silvia HICAS JDM steering wheel

S14:

-stock hood with custom vent (from 95)

SR20DET:

-stock intake manifold (two avail)
-red top valve cover (have two. one has been partially stripped, other came off a stock motor)
-stock radiator
-stock bov
-block
-coilpack cover
-370cc injectors blueprinted and balanced by RC Engineering
-T28BB turbo with HKS wastegate. I bought brand new. Has less than 1k miles. I need to upgrade for more power!!

Aftermarket:

-Autometer air/fuel gauge 52mm black face
-Autometer carbon tach 4"
-Blitz BLM 60mm boost gauge
-Bride replica Brix II black seat with genuine Bride seat bracket for passenger side S13. Zero wear.

Make reasonable/non low ball offers. Parts located in Socal. Pics will be taken.
hkspeed
04-18-2005, 09:01 AM
how much for the valve cover if i pick up?
i plan on painting it so how it looks doesnt matter
the tech
04-18-2005, 10:57 AM
how much for the valve cover if i pick up?
i plan on painting it so how it looks doesnt matter

$75 picked up.
nissantuner22
04-18-2005, 11:28 AM
pics of the apexi intake [email protected]
TAMTANIUM
04-18-2005, 11:47 AM
picture of Silvia HICAS JDM steering wheel and Apexi intake kit to [email protected]
allmotorKA
04-18-2005, 01:34 PM
Do you have the plastic wheel well linings that go inside the front fenders for the s13?
the tech
04-18-2005, 03:26 PM
pics of the apexi intake [email protected]

Pics sent.
maverick27
04-18-2005, 03:31 PM
how much for the bride replica with the bracket email me at [email protected] thanks.
the tech
04-18-2005, 03:38 PM
Do you have the plastic wheel well linings that go inside the front fenders for the s13?

Sorry, no I don't.
the tech
04-18-2005, 03:39 PM
how much for the bride replica with the bracket email me at [email protected] thanks.

Email sent.
woodysmom
04-18-2005, 06:42 PM
pics and price of apexi air filter plz to [email protected] I'll most likely take it
Projekt_Sil80
04-18-2005, 07:20 PM
How much you looking to get for the JDM cluster?
jdm538
04-18-2005, 07:35 PM
how much for the passenger bracket with replica seat? [email protected] thanks..
speedgod^s13
04-19-2005, 01:10 AM
How much for the headlight housing, with the bulbs, shipped to 96816?
AllenRPS13
04-19-2005, 01:49 AM
how much for the A/F ratio gauge shipped? any pics?
plz send pics to [email protected]
the tech
04-19-2005, 08:35 AM
pics and price of apexi air filter plz to [email protected] I'll most likely take it

Price and pics sent.
the tech
04-19-2005, 08:36 AM
how much for the passenger bracket with replica seat? [email protected] thanks..

Email sent.
the tech
04-19-2005, 08:37 AM
How much for the headlight housing, with the bulbs, shipped to 96816?

$230 shipped
the tech
04-19-2005, 08:39 AM
how much for the A/F ratio gauge shipped? any pics?
plz send pics to [email protected]

Email sent.
the tech
04-21-2005, 04:49 PM
..................updated..................
KA24DESOneThree
04-21-2005, 05:00 PM
How much for Sparco driver's seat bracket?

Where in SoCal are you located?
iknowyoulike
04-21-2005, 05:16 PM
How much for Bride with rail if not sold yet. email me at [email protected]
WILDACEX187
04-21-2005, 08:01 PM
pic of the HICAS silvia steering wheel. [email protected]
the tech
04-22-2005, 04:32 PM
How much for Sparco driver's seat bracket?

Where in SoCal are you located?

I can do $100 for the bracket. I'm in Whittier.
the tech
04-22-2005, 04:32 PM
How much for Bride with rail if not sold yet. email me at [email protected]

Email sent.
s13gonwild
04-22-2005, 05:47 PM
hi have you sold the s13 fenders? if not sold yet pm me

thanks
jdm538
04-23-2005, 12:46 AM
are you willing to seperate the bride rail please let me know at [email protected] thanks..
noodl35
04-23-2005, 01:12 AM
pics and prices for the a/f gauge and blitz boost gauge

[email protected]
the tech
04-23-2005, 10:04 AM
hi have you sold the s13 fenders? if not sold yet pm me

thanks

PM sent!!!
the tech
04-23-2005, 10:05 AM
are you willing to seperate the bride rail please let me know at [email protected] thanks..

Nope, not willing to separate the rail.
KA24DESOneThree
04-23-2005, 10:36 AM
I can do $100 for the bracket. I'm in Whittier.

Whittier's pretty far. Is that price including shipping or no? If not, please get back to me with a price including shipping. Like I said, I'm very interested.
FaLKoN240
04-23-2005, 05:45 PM
Are these HID headlights? or H4s? and depending on if they are H4s or HIDs, how much shipped to 94402?
richardxfeng
04-24-2005, 12:55 AM
Is the Apexi Intake still available?if so, please send picture to [email protected]
Thanks!
the tech
04-24-2005, 10:24 AM
Whittier's pretty far. Is that price including shipping or no? If not, please get back to me with a price including shipping. Like I said, I'm very interested.

Shipping is extra. Where are you in SD? I may be heading down there on Saturday.
the tech
04-24-2005, 10:25 AM
Are these HID headlights? or H4s? and depending on if they are H4s or HIDs, how much shipped to 94402?

They are real HID bulbs. They come with the special housings in order to use the bulbs. $125 shipped.
the tech
04-24-2005, 10:26 AM
Is the Apexi Intake still available?if so, please send picture to [email protected]
Thanks!

Apexi intake is sold.
KA24DESOneThree
04-24-2005, 11:22 AM
the_tech, if you're coming down, I could meet you off the 5 or 15, whichever route you're using. I live about 50 miles north of San Diego, so you pass right through my neck of the woods.

Lemme know, I have cash in hand and ready to go.
khamilton6
04-24-2005, 11:45 AM
how much for the
-Blitz BLM 60mm boost gauge
-Greddy Profec B

shipped to Orlando FL 32808
thanks
the tech
04-25-2005, 08:19 AM
how much for the
-Blitz BLM 60mm boost gauge
-Greddy Profec B

shipped to Orlando FL 32808
thanks

$100 for the gauge, $200 for the Profec B.
the tech
04-25-2005, 08:21 AM
the_tech, if you're coming down, I could meet you off the 5 or 15, whichever route you're using. I live about 50 miles north of San Diego, so you pass right through my neck of the woods.

Lemme know, I have cash in hand and ready to go.

I will let you know this week for sure whether I will be coming down. It will be off the 5 fwy if I come.
the tech
04-27-2005, 03:53 PM
......updated......
the tech
04-28-2005, 08:52 AM
the_tech, if you're coming down, I could meet you off the 5 or 15, whichever route you're using. I live about 50 miles north of San Diego, so you pass right through my neck of the woods.

Lemme know, I have cash in hand and ready to go.

Looks like I won't be going down this weekend.
nnkfws333
04-28-2005, 09:28 AM
SOrry I didnt get a chance ot read the post but how much for the Greddy B Profec? THanks!
the tech
04-28-2005, 12:48 PM
SOrry I didnt get a chance ot read the post but how much for the Greddy B Profec? THanks!


$200 plus shipping.
KA24DESOneThree
04-28-2005, 01:55 PM
Looks like I won't be going down this weekend.

What can you do shipped, then?
the tech
04-28-2005, 02:29 PM
What can you do shipped, then?

Well unless youre in a rush, I'd like to save you from me having to ship it. If you're in a rush, then I can find out what it will cost to ship.
KA24DESOneThree
04-29-2005, 03:56 PM
No rush, if you'll be down here sometime in May or June that'd work too.
jdm538
04-29-2005, 05:48 PM
wanna part the passenger bride rail yet? [email protected]
the tech
04-30-2005, 02:07 AM
wanna part the passenger bride rail yet? [email protected]

Nah, I'll just keep the setup if I can't sell it as a whole.
squalsme
05-04-2005, 05:03 AM
how much for the bride seats with rails if not yet sold?

[email protected]

thanks
pRaHjeC
05-04-2005, 05:10 AM
is the stock bov still available? if so, how much do you want for it?
RedlineGoods.com
05-04-2005, 06:18 AM
How much for the SR20DE MAP sensor?
the tech
05-04-2005, 10:11 AM
how much for the bride seats with rails if not yet sold?

[email protected]

thanks

Email sent.
the tech
05-04-2005, 10:12 AM
is the stock bov still available? if so, how much do you want for it?

Make me an offer (a reasonable one).
the tech
05-04-2005, 10:13 AM
How much for the SR20DE MAP sensor?

Sorry, never had that part available.
mixedwell
05-04-2005, 03:07 PM
if u still have the HID assembly i'd like to buy it. im located in west covina so im not too far. how much if i pick it up?
the tech
05-04-2005, 04:18 PM
if u still have the HID assembly i'd like to buy it. im located in west covina so im not too far. how much if i pick it up?

Pickup for the housings + bulbs is $200.
ka24detkyle
05-10-2005, 11:30 PM
Pics and price for the silvia steering wheel [email protected]
Campos
05-10-2005, 11:56 PM
yo u still have the s13 fenders?
the tech
05-11-2005, 03:11 PM
Part added!! Now have available T28BB turbo with less than 1k miles.

Also willing to trade and possible cash if you have the following:

Emanage with all harnesses and sensors for SR20
Innovate A/F kit
550 or larger side feed injectors
Z32 maf with plug
GT28RS or GT25R
Profec E-01
the tech
05-15-2005, 10:40 PM
Lots of great stuff still available.
the tech
05-15-2005, 10:42 PM
No rush, if you'll be down here sometime in May or June that'd work too.

Looks like I'll be swinging down this coming weekend. Let me know if you still wanna meet up.

Thanks!!
SilviaDriver
05-17-2005, 07:32 PM
did anybody buy the hkb steering hub yet? if so got any pics? if its for s14 it should come with the SRS light eliminator.

send pics to [email protected]
or aim me at "aznixtcistyle"

thanks
the tech
05-18-2005, 08:54 AM
did anybody buy the hkb steering hub yet? if so got any pics? if its for s14 it should come with the SRS light eliminator.

send pics to [email protected]
or aim me at "aznixtcistyle"

thanks

It is for the S14, I took it off of the car myself. There is no light eliminator. No pics yet.
SilviaDriver
05-18-2005, 07:57 PM
well if the hub is for s14 but no eliminator, wouldnt i tlook like hte s13 hub then?

how much you want for it
Slidin240Wayz
05-18-2005, 09:18 PM
Price on the t28?
the tech
05-19-2005, 08:46 AM
well if the hub is for s14 but no eliminator, wouldnt i tlook like hte s13 hub then?

how much you want for it

Looks nothing like the S13 hub. It will only fit on the S14 and not the S13.

$40 shipped.
the tech
05-19-2005, 08:46 AM
Price on the t28?

$650 + shipping.
JJ240
05-25-2005, 02:16 PM
Ill take the HKB hub [email protected]
lv-180sx
05-25-2005, 02:41 PM
how much for the t28 turbo???
CHARLIE2020
05-25-2005, 03:24 PM
The fenders you got are they for a Silvia? How much?
the tech
05-25-2005, 03:55 PM
how much for the t28 turbo???

$650 + shipping obo. Comes with HKS wastegate actuator.
the tech
05-25-2005, 03:56 PM
The fenders you got are they for a Silvia? How much?

Yes, they are for a Silvia. $300 obo + shipping.
the tech
05-25-2005, 03:57 PM
Ill take the HKB hub [email protected]

Email sent.
JJ240
05-27-2005, 03:07 PM
Paypal sent!
andrewk1
05-30-2005, 12:56 AM
If you still have the bride seat and rail could you email me the price. [email protected]
the tech
06-08-2005, 03:42 PM
List updated!