PDA

View Full Version : FS: Built CA18 Project Car (MUST SELL)


CarObsessed
04-18-2005, 08:02 AM
Hi Everyone, UPDATED

Up for sale is my CA18 Project Car. I have to sell because I am away at college and have no time or money to finish this. I also need money to pay bills. Here are the details, please e-mail me if you have any questions. ([email protected]

Year/Make/Model
1993 Nissan 240sx Fastback
Base Model-5spd

Color
Exterior-RED
Interior-Gray and Black

Mileage
11x,xxx on chassis
0 miles on rebuilt motor (thats right, 0 )

Vehicle condition
Exterior-Great condition, paint is still bright and shiny with the original clearcoat, only a few small dings that you would expect from a 12yr old car

Interior-Good condition, could use a detailing but no tears in the seats, also has black vinyl in the doors where the tweed used to be

CA18DET Engine-Outstanding. Could not ask for a cleaner, more sound, engine.

Body/Chassis-Great condition. No rust anywhere, also very straight with no suspension or brake problems.

Engine Mods
Engine Work
• JE Forged Pistons(stock bore)
• Polished, forged and shotpeened rods
• New bearings
• Balanced, polished and knife- edged crank
• Cryo-treated block
• Head ported and polished
• Upgraded Valve Springs
• Skyline 65mm Throttle Body
• Intake manifold ported
• 65 degree thermostat
• New oil pump
• New water pump
• Tomei 1.2mm metal head gasket
• New Headbolts
• CA18/SR20 Hybrid Transmission
• SPEC Stage 3 Clutch(6 puck)
• 300zx Oil Filter
• Butterflies removed from Intake Manifold
• Resurfaced flywheel
Fuel Delivery
• 300zx Fuel filter
Intake/Exhaust/Cooling
• Hybrid AUS FMIC and Piping (HUGE)
• Dual Electric Fans

As you can see, this car is perfect for someone with high power goals, or someone who just wants a reliable, well-built motor. You can put whatever turbo/manifold combo you want on there, this motor can take it up to a peak of 600hp, though 400-450whp can be done daily.

What this car needs
This car needs a turbo, manifold, injectors, and downpipe. (I get asked this a lot so I wanted to put it up here).


Stereo
(Comes with the car but you can do whatever you want with it)
Panasonic Head Unit
Kicker 4x6s in doors
Kicker 6x9s in rear deck
Sony Amp
2 10" JBL Subs in a box

Location
This car is in Western PA but can be shipped anywhere in the US at the buyer's expense.

Asking Price
Asking $2800. Price is negotiable but please do it through e-mails.[/B]

Contact
Please don't hesitate to e-mail me with any questions. If the car does not sell soon it will go up on e-bay.
[email protected]

Thanks!

97SilviaRB
04-18-2005, 08:36 AM
wow great price

BoroBoroS13
04-18-2005, 10:17 AM
Ummmm wow... thats hella cheap.

The work/parts on the motor alone is well over 3K.

CarObsessed
04-18-2005, 10:23 AM
I know, it cost MUCH more than that :sniff sniff: but I need to pay some bills. (Damn crying smilies wouldnt work, lol)

I will also consider trades for a stock or slightly modded 240+cash

Thanks for the nice comments

thejester03
04-18-2005, 01:23 PM
how about a trade for an 89 Celica GT-S plus some cash?

CarObsessed
04-18-2005, 01:48 PM
Sorry, trying to stay RWD if possible.

Thanks for the interest though!

liv2drift045
04-18-2005, 02:25 PM
w/ a motor build that thorough (sp) why do u think it can handle only a peak of 600hp...BUMP for cA

CarObsessed
04-18-2005, 02:48 PM
well, the rods are stock but redone so they can actually hold about 650hp but I didnt want to put up anything too extreme and have someone be pissed if they blew it up. thanks for the props though!

WILDACEX187
04-18-2005, 10:16 PM
does the car run at all? didnt read that in ur post.

SoCalSilvia
04-18-2005, 11:08 PM
if you were in/near socal you would have the cash in your pocket right now. that is a sick deal

zero.counter
04-18-2005, 11:15 PM
You can drive it down to texas and drive away with an S14 and some cash...

CarObsessed
04-19-2005, 07:10 AM
WILDACEX187- the car does not run but only because it is missing a turbo, manifold, injectors, and downpipe. it will run, but obviously not without those parts.

SoCalSilvia-I'll ship it if you wanna pay for it. I dont think it would be too much trouble.

zero.counter-If I could drive it there I just might. Is there any other way we could swap?

Thanks for the interest!
Ian

Taniguchi_Is_#1
04-19-2005, 09:27 AM
are those all the parts that are missing?

are you interesed in a trade? i have a '91 240sx coupe with basic mods. it's in great condition and i'n in Eastern PA. let me know if you want more info.

CarObsessed
04-19-2005, 10:58 AM
yeah, i'm somewhat interested. send me some info and pics about your car and i'll get back to you. [email protected]

Thanks!
-Ian

Methods
04-19-2005, 03:00 PM
finish the project then sell it!

CarObsessed
04-21-2005, 12:34 PM
bump to the top...

USpecS13
04-22-2005, 11:25 AM
hey can you pm me a shipping price to 91754 socal?

thanks

CarObsessed
04-24-2005, 02:00 PM
shipping would have to be set-up by the buyer, sorry.

however, please check the original post. Asking price is now $2800 but no extra parts.

Will also trade for a S13 in good running condition. Looking for a coupe but would take a clean hatch.

Please e-mail me if you have a car to trade or are interested in buying the car right out. I need to sell within the next few weeks.

Thanks!

[email protected]

weazel240
04-30-2005, 09:07 AM
do u have pics?
[email protected]

adictd2b00st
05-04-2005, 02:38 PM
i have a '93 coupe if your looking for one in a trade, plus i'd give u some cash. do u have AIM it'd prolly be easier to talk/send pics on there.....

interested :)

AiMCHeATER
07-12-2005, 07:03 PM
hey man im in indiana...i have a '92 hatch in great condition. it has an ebay intake and front/rear strut bars. the only problems it has is the common tear in the left drivers side seat and the dash is cracked. im not on my home computer so if you want some pictures, email me. I have many, many pictures. I run synthetic oil in the KA. it has 15x,xxx miles on it but it still feels great. I would be glad to give you a couple of hundred bucks also. my email is [email protected] Please respond asap!

jake

CylonFrakker
07-13-2005, 09:08 AM
what do you mean 2800 with out the extras? What extras i thought the price was already 2800 for everything but injectors, dp, and manifold and turbo? Can you clarify
also need pics please send to [email protected]

alexchanman
08-06-2005, 08:21 PM
hmmmmmmm how much do you think shipping to boston, ma would cost? upwards of 700??

smellslikecurry
08-08-2005, 05:59 AM
how much shipped to ny 11566? also do u have any pictures and have u done anything about fuel management/ecu ?

snatch13
08-08-2005, 07:58 PM
ha i bet this was sold... the post is from april...