ARC Intercooler *Group Buy*

[MadScientist]

ARC Intercooler *Group Buy* (http://raretrick.com/index.asp?cat=1621&Page=1&Display=Yes&Back=Listings&ProductsID=7520)
http://www.raretrick.com/store/images/products/7520_detail.jpg

Starts April 1st.
Ends April 29th.

Special Order from Japan!(Sea Freight)
Minimum of 10 Orders
100% Payment is Due at the End of the Group Buy!!

These Intercoolers are beautifully crafted and highly desired in the industry.
Prices are a One Time offer Only!!
Prices are below Yen value and way Below US MSRP!

Silvia S13 CA18DET, M073 Cut Back - $930.00
Silvia S13 CA18DET, M073* Cross Flow - $1,358.00
Silvia RS13 CA18DET, M073* Cross Flow - $1,358.00
Silvia (R)PS13 SR20DET, M073 Cut Back - $930.00
Silvia (R)PS13 SR20DET, M073 Cross Flow - $930.00
Silvia (R)PS13 SR20DET, M073* Cross Flow - $1,358.00
Silvia S14 SR20DET, M073 Cut Back - $930.00
Silvia S14 SR20DET, M073 Cross Flow - $930.00
Silvia S14 SR20DET, M073-AL Cross Flow - $1,188.00
Silvia S14 SR20DET, M073* Cross Flow - $1,358.00

{M073= 260x 500x 70mm w/ mild steel piping}
{M073-AL= 260x 500x 70mm w/ Aluminum piping}
{M073*= 300x 600x 70mm w/ Aluminum piping}

Enjoy... ARC Intercooler *Group Buy* (http://raretrick.com/index.asp?cat=1621&Page=1&Display=Yes&Back=Listings&ProductsID=7520)

Peace
Drew

[lotusdrift]

What style intercooler design are these (tube and fin or bar and plate), and is there any performance data out there for them? I'm very interested in getting in on this gb, but I want to justify the extra cost over a blitz before I do it.

[MadScientist]

"ARC intercoolers are designed to get maximum cooling for turbo charged vehicles. ARC company in Japan has done extensive research and testing to make sure that the intercoolers they make are the most efficient and functional products in the market. The inner structure was designed so that a large volume of air can be traveled through and as free flowing as possible, and the outer fins were pushed backward to make sure all the air can travel to cool down the intercoolers."

Blitz LM - US-MSRP $1080.00 (24" x 10.5" x 2.5")

ARC -
{M073= 260x 500x 70mm w/ mild steel piping, US-MSRP $1655.00}
{M073-AL= 260x 500x 70mm w/ Aluminum piping}
{M073*= 300x 600x 70mm w/ Aluminum piping}

Both are tube/ fin design but the ARC has a very superior design.
1. The Fins are recessed to force air through more effectively.
2. ARC has also developed their own "micro" tubing that is used in all their oil coolers and Radiators.
3. Fins are also waved so that air hits evey part of the fin, dissipating heat as its passing through.

Honestly, the BLITZ LM is a weak compairison, other than the fact that I am offering a $1600 IC for the same price as a BLITZ LM!!

Here are some Pics also...

Peace
Drew

[lotusdrift]

Does it come with all the required hardware (hoses, clamps - t bolts?, etc).
Do the pipes come coated at all? You can see a picture below where the pipes are black.

And is the price with or w/o shipping?


I found some pictures through freshalloy that I think make a great sell
http://www.worldwidechang.com/Pics/Cars/MyCar/ARC-Inter1.jpg
http://www.worldwidechang.com/Pics/Cars/MyCar/ARC-Inter4.jpg
http://www.worldwidechang.com/Pics/Cars/MyCar/ARC-Inter5.jpg
http://www.worldwidechang.com/Pics/Cars/MyCar/ARC-Inter3.jpg


You can probably count me in on this.

[240KAT]

what about sidemounts and piping?

[MadScientist]

Does it come with all the required hardware (hoses, clamps - t bolts?, etc).
Do the pipes come coated at all? You can see a picture below where the pipes are black.

And is the price with or w/o shipping?


I found some pictures through freshalloy that I think make a great sell
http://www.worldwidechang.com/Pics/Cars/MyCar/ARC-Inter1.jpg
http://www.worldwidechang.com/Pics/Cars/MyCar/ARC-Inter4.jpg
http://www.worldwidechang.com/Pics/Cars/MyCar/ARC-Inter5.jpg
http://www.worldwidechang.com/Pics/Cars/MyCar/ARC-Inter3.jpg


You can probably count me in on this.

Thanks for the pics... All hardware and hoses included, as shown in the first post images.
Sorry, price is low enough, shipping is not included and will be determined once product arrives in the U.S.

{M073= 260x 500x 70mm w/ mild steel piping} as seen in post 4.
{M073-AL= 260x 500x 70mm w/ Aluminum piping}
{M073*= 300x 600x 70mm w/ Aluminum piping}

The stock replacement side tank intercoolers are no longer listed on the ARC website.

Peace
Drew

[mjjstang]

that ic in the pic is the kit that I have, very very nice kit, you guys should jump all over this, I think I paid about the same price in another GB, very good quality and easy install.

[justinhustle]

whats the benefit to the cross flow versus the cut back type :)

[lotusdrift]

There would be almost a third less pipe with the cross flow. I think the cut back would make use of stock cut outs for the sidemount (jdm vehicles), so no cutting would be required. It would also make use of the stock cold pipe in that case (hence why its not even more expensive I'm sure). I would think you would only want to order this if you were too lazy to relocate your battery/cut a hole in the battery tray.

Someone please correct me if I'm wrong.



And thanks for taking the time to answer questions Drew.

[nissantuner22]

side mount intercooler buy would be pretty sweet.

[MadScientist]

whats the benefit to the cross flow versus the cut back type :)

The shorter the distance between the Turbo and the Throtle Body the faster the turbo will spool. This is why you see V-mount set-ups on Race Cars.

If I remember right the side pipes are 80mm... perfect for consistant sized piping with 80mm Z32 or 90mm Q45 MAFS and a 70mm GTi-R Throtle body.

lotusdrift: no prob.
nissantuner22: S.O.L.

peace
Drew

[MadScientist]

http://www.worldwidechang.com/Pics/Cars/MyCar/ARC-Inter3.jpg
This is a beautifull pic ot the recessed fin design only found on ARC!

Not sure why you guys are not all over this... Shop around, Google it, Ebay it, it doesn't matter... people sell this IC Used for what I am offering it to you NEW!!

Peace
Drew

[240KAT]

no dice of side mount, no dice on sale :(

[hey808]

How many people are doing this GB? I'm *very* interested so I hope we'll have enough people doing this.

[MadScientist]

I am counting orders, not a show of hands. :aw:

Counting hands never works out... if people are seriously interested they can make the commitment by placing an order.

You expect me as a dealer to be seriouse about your orders, and I expect the same of the customer.

So far... No Orders... Group Buy Ends April 29th.

Peace
Drew

[240KAT]

side mount hotness...

[integlspwr]

I gotta keep an eye out for this. Would look dope for a ARC intercooler on a Civic... ^_^

[MadScientist]

ARC doesn't make Intercoolers for Civics, but you can get a Custom made Core.

240KAT- No Side Mounts!!

Peace
Drew

[240KAT]

what about smic piping?

[nissantuner22]

im pissed the side mount is no longer available. i woulda got one than! bump for awesome product.

[lotusdrift]

Going to have to pass, I'm getting a good deal on a full paint job instead. I hope people jump on this, its such a beautiful peice!

[atom]

http://www.arcinter.co.jp/i%2Ccb2.html

I dunno why he said the ARC website doesn't list the sidemounts any more. Aren't these the stock location applications? S13-S15 right there.....

Can you get all the ARC intercoolers or is this group buy just for S chassis applications?

[MadScientist]

Silvia/180SX S13/RS13 CA18DET M075S13G03 M075 \98,000 \102,900 　 C
Silvia PS13/RPS13 SR20DET M075PS13G03 M075 \98,000 \102,900 　 B
Silvia S14 SR20DET M075S14G03 M075 \98,000 \102,900 　 B
Silvia S15 SR20DET M105S15G03 M105 \158,000 \165,900 B

Even if this listing was for a Side Mount, the price is the same as a Front Mount.

The Group Buy was for all ARC Intercoolers not just Silvia's... to much to list!
If interested in something other than the Silvia IC send e-mail ([email protected])

Peace
Drew