Parting out front end destroyed S14

[Shin_Kudo]

Well, I totalled my car tonight. It was a good year we had together, but I guess it just wasn't gonna last any longer.

There is not an intact body panel left on the car. I hit a curb on a freeway bus stop after one of my FN01s cracked and broke, caught gnarly air, then went into a wall on my left and into a wall on my right.

Here's a parital list of destroyed parts
-Every front and side body panel
-all front end lighting
-radiator
-wheels

Now, here's what's still good, possibly.
-Motor and transmission ('98 KA, ~80k mi) (w/ exedy clutch)
-Suspension parts. Tein HEs, C-Tune RUCAs, Traction rods, rear toe rods, front tension rods, Cusco CF strut bar
-Brake rotors (drilled/slotted brembo), calipers, etc
-trunkild w/ installed C-Tune Carbon Fiber adjustible GT wing
-everything from the interior, except possibly SE passenger seat. Have seatbelts, other seats, all trim panels except console lid (including radio trim)
-Sparco Speed seat and Sparco rails/bracket. Undamaged, but pretty well used, ~8 months of daily driving. In very good condition, but padding is sunken down somewhat.
-Sparco 345 red suede steering wheel / hub
-taillights / center panel

Anything else, ask me. Car is in LA area.

[revat619]

that sucks man, but its good to know that you're ok. You can always get another car. Good luck bro.

Now about the parts, what kind of condition is the tranny in and how much? i'd be able to pick up too.

[Shin_Kudo]

Last I knew, it was good. Car's still at the tow yard, I'm gonna get it in the motning, check everything out then. There's only one part off this car I really intend on keeping, the one thing that is essential, my 2-way. Now it's time to start looking for a good deal on a new one.

[atlsupra]

Are the rotors 4 lugs? are you willing to ship? How much are you asking for?

[hey808]

How much for the Tein HE's shipped to Chicago (zip 60563)? Thanks

[DocTaDrifT]

how much for the sparco seat?

[Ritz S14]

damn man..glad you're okay dude. Hope you didn't suffer any injuries.

if you happen to have the front 5lugs for sale, I'd be interested.

[chrispy]

What color is the Sparco seat? Pics?
Was it equipped with a sunroof? I need a few parts.

[Kouki]

That really sucks, glad that you are ok. Are you gonna get another S14?

Interested in the strut bar, interior panel that goes under the steering column where your knees go, both plastic trim pieces on the door panels that hold the window switches and lock switches (don't need the switches just the panel). Give me a price on that shipped to 68037 Nebraska.

[aZnboy911]

manual seatbelts. how much ship to sf?

[bosozoku.s14]

if smog tech doesnt want it...i will take the 5 lug Front and Rear

[ALTRNTV]

I'll take the A-pillar plastic, shift boot and knob for $30 picked up this Friday. Sound good?

[pkw1]

is the shift boot and the plastic around it in good shape.. if so i'll take it

[sickdoode]

do you have the headlight brackets? how much? and for the rear toe rods and front tension rods

[Shin_Kudo]

-4 lug
-seat was red
-no sunrood
-no shift boot / plastic (car was a auto > 5speed swap)
-Shift knob wasn't stock, I think I'm actually gonna keep it.
-Headlight brackets are probably toast.
-the suspension arms should be fine in the rear, front may be trashed. From what I saw, it looked like they survived and came off the mounts, though.


For pricing, I'm going to wait until I start pulling the car apart. I don't want to price things out then find they're broken.

[ruudbwoy]

what color was the interior and how much for the cusco strut bar

[Powered by Jay]

Hey Shin_kudo you have a pm. I'd like to take a look at what you got.

[justinhustle]

ill take the rear view mirror =]

[beavis360]

sent a pm about the M/T parts.

[maverick27]

how much for the gt wing and the tein HEs. and if the Cusco Strut is still available how much for that?

[toraji]

how much for your transmission?

its 5spd? how many miles? I can pick it up.

[m0rex]

I'll take the C-Tune RUCAs if they are intact and if no one takes the 5 speed swap i'll take it.

[Nizmo240_22]

How much for the front spindles if they're not damaged.

[s13srmadness]

hi i need the hvac head and plastic that surrounds radio shipped to NJ 07005
ive been trying to buy these little things for awhile with no luck.
please sell to me
[email protected] with a price and your paypal address
thanks,
-steve

[Yuri]

Keep me up to date on the motor, If its still good, I might be interested when my refund comes in. :drool:

[mmdb]

is the roof intact? I'd like to come by and chop it off for ya :) Also if your interior is black i'd like your door panels. I'm local so I can come by anything.

[BlackSilvia96]

Can you sell me your lower shift boot and plate, also intrested in your driveshaft.....Did the driveshaft have ABS? If so how much for all these parts? shipped to 96826...Get back to me asap!! Thanks!


BlackSilvia96

[sw20>>s14]

interested in the cusco strut bar and sparco bracket

[Shin_Kudo]

Some updates / clarifications.

Non- ABS
no shift boot or plate
Black Interior

[Shin_Kudo]

is the roof intact? I'd like to come by and chop it off for ya :) Also if your interior is black i'd like your door panels. I'm local so I can come by anything.

You gonna come by and sawzall it off? That'd be fine by me. Gotta figure out what such a thing costs, though... I did always want an S14 'vert though!

If so, any chance you might let me make a cut or two to make extracting the engine a bit easier?

[snp_ethan]

hey im glad to hear your fine, on the other hand, im looking for the ashtray, the steering wheel, and the hub, im in LA too, so gimme a call, pm or mail, me
[email protected]
or 818-445-5732

[sw20>>s14]

interested in the cusco strut bar and sparco bracket

how much? let me know [email protected]

[Shin_Kudo]

I really haven't priced anything yet, and as I don't have the car until tomorrow, I can't do any sales anyway. Anyone interested in parts, PM me offers. Sorry, but I can't take lowballing, usually I'm cool with it to help out another 240 owner, but in this case I really need the cash badly to get back on the road.

[sw20>>s14]

are the taillights kouki or zenki? i assume the strut bar is for the front, correct me if im wrong. and is it oval shaft? pm'd you

[ALTRNTV]

What about the A-pillar plastic I asked about?

[Shin_Kudo]

STB is oval shaft, carbon wrapped. (Better anyway, the full carbon ones are too flexible to work)

The A-Pillar plastic should be fine. Note that it's the SE plastic, so it has the holes for the tweeters.

Zenki tails, but the passenger side has a crack. (Not broken or anything, though, just a crack in the plastic.)

Once I get the car, and start pulling it apart, I'm gonna start getting what parts and who wants them worked out, parts will go to the highest bidder obviously. Sorry to seem a bit greedy or anything here, but, as I've mentioned, I really need to make as much as possible so I can get in a new car and back on the track.

[aznraper]

im interested in the cusco strut bar and the tien he's. ready to pick up.

[DORIMON]

Please pm if your able to sell the interior carpet, not the floormats, but the actual floor carpet. I have green and would like to have gray or black carpet. I'm very serious about purchasing as long as the price reasonable. Please pm with how much it is with shipping to my zipcode of 20744 (Fort Washington, MD). Thanks.

[ALTRNTV]

I'll take the A-pillar plastic then, how's $10 picked up?

[Raine]

interested in the rear brakes and all 3 e-brake cables... email me if they're available - [email protected] I'm local 909 area and I can pickup

[shawn_16]

i need the power steering fluid container bracket
i'm interested in C-Tune RUCAs, Traction rods, rear toe rods, front tension rods
do you hae that RSR exhaust up for grabs, too?

[DocTaDrifT]

can you PM me when you get a price on the sparco?

[AzNCmB]

how much for the driver side front lower control arm shipped to new orleans, zip code 70058?

[socals13guy]

hows ur engine ? I got first dips on the engine

[Shin_Kudo]

i need the power steering fluid container bracket
i'm interested in C-Tune RUCAs, Traction rods, rear toe rods, front tension rods
do you hae that RSR exhaust up for grabs, too?

I do have the remains of the exhaust. However, the pipe is broken, and the muffler is dented somewhat. I also have a custom 2.5" resonated non-muffled stainless exhaust available. It's welded to a gutted cat, so it'll replace everything starting at the manifold.

[Powered by Jay]

Shin Kudo,
Did you pick up the car yet?

[Shin_Kudo]

Car's coming tomorrow morning. I'll start updating everyone as soon as it does.

[ALTRNTV]

Cool, don't forget about my A-pillar piece! =D

[Raine]

um, add the stock header B-pipe (from first flange down to the cat) to my list please =D

[sw20>>s14]

still interested in the sparco seat bracket...im up at 3am just thinking about it...hehe

[Shin_Kudo]

still interested in the sparco seat bracket...im up at 3am just thinking about it...hehe

You need rails, too? Someone else wants to buy the seat from me, so maybe it'll work out. On the other hand, I need to see what I end up getting for my parts, I may end up keeping the seat.

[Shin_Kudo]

Should be here within an hour or so, I'll start inspecting it then.

[maverick27]

PMed you about stuff!

[devonkyle77]

please pm me with what suspension pieces are still avail

[maverick27]

dude i still want those HEs from you. let me know ill go pick them up tonight if u have them thanks.

[aznraper]

you have ctune parts so that means u must live some waht near!!! give me your phone number because im interested in a lot of parts. im free tomorrow to go check your car out.

steve

[Enflow]

Hey man, I've PM'd you bout a few things. Thanks!!

[jOeHaCk98]

carpet condition?

[Shin_Kudo]

I've got the car, been pulling apart the interior. I'll have info and availability worked out by the end of the weekend.

[Kouki]

I'm still interested in both sides plastic door trim that holds the window/lock switches, with switches, hvac control panel, hazard, rear defrost, and dimmer switches. Give me a price shipped.

[AGPSuperstar]

Pm sent homie!

[de_240]

how much are the rear brake calipers?

[9524tee]

ill give you 200 for the tranny ?

[sw20>>s14]

so how much for the sparco bracket? do you still have the front driver and pass fender lining?

[ghostuss]

Hehe sell it all except the 2 way...

[sogi99]

how much for the tranny conversion all of the workings like pedal, transmission, flywheel clutch master & slave and hard lines plus your computer. Please e-mail me if this is still available thanks

[SimpleSexy180]

driver seat?

[Shin_Kudo]

Just a bit of an update, a couple more items will be available.

First, my stereo. It's got a Pioneer Premier deck, Kicker component front speakers (w/ tweeters, and splitter box / mini amp) and Clarion rears. System would cost 7-800 new, I'm looking for ~500.

Second is my Nismo GT 2-Way LSD. This is a real GT, with the output shafts, not the one Nismo USA sells. ~2500 miles on it. Been offerred 500, willing to sell, professionally installed in pumpkin, ready to bolt in, for a higher offer.

[speeddreamz]

ok im retarded, I posted before seein the last post. I would like those kicker component speakers (tweeters/crossover right?/front speakers) and if you have the interior panel (pillar) that goes over the tweeters?

[Eternal_240Sx]

Hey what model pioneer do you have???

[Shin_Kudo]

I'm actually not totally sure what the model is. It's the top model with the non-OLED screen. (IE one level below the lowest OLED one) It was in the $400 range.

[irax]

do you have any pictures of the shell??? i might be willing to buy it after its stripped, just aslong as it can roll....

[Shin_Kudo]

I don't think it'll be rolling anywhere, at least not with teh front on teh ground. I'll get you some, though.

[SlideMyRide]

Hey do you have an address so i can look at what i need? I think i need some rear calipers the ecu and passenger fuse box.

[Buffalo Daughter]

how much for your tension rods and what kind are they? Do you also have your stock cat?

[cpt276]

Hey sorry to hear about your car. Glad you're ok.

My car got broken into recently, destroyed my center console, and now I'm looking for a black dash.

Do you still have a dash? If so, let me know if it's still for sale & for how much?

You can email me at: [email protected]

Thanks,
Brian

[lc1231]

do you still have the 5 speed transmission?
how much?
please email to:
[email protected]
thanks

[ManoNegra]

do you still have the 5 speed transmission?
how much?
please email to:
[email protected]
thanks

Why revive such an old thread? PM the dude.

[.::SR20_240::.]

will you sell the shell?? im willing to come and pick it up. im planing on a project car and maybe yours is fixable?? do you have any pics???